Abstract:The use of advanced brittle composites in engineering systems has necessitated robotic rotary ultrasonic machining to attain high precision with minimal machining defects such as delamination, burrs, and cracks. Longitudinal–torsional coupled (LTC) vibrations are created by introducing helical slots to a horn's profile to enhance the quality of ultrasonic machining. In this investigative research, modified ultrasonic horns were designed for a giant magnetostrictive transducer by generating helical slots in catenoidal and cubic polynomial profiles to attain a high amplitude ratio (TA/LA) and low stress concentrations. Novel ultrasonic horns with a giant magnetostrictive transducer were modelled to compute impedances and harmonic excitation responses. A structural dynamic analysis was conducted to investigate the effect of the location, width, depth and angle of helical slots on the Eigenfrequencies, torsional vibration amplitude, longitudinal vibration amplitude, stresses and amplitude ratio in novel LTC ultrasonic horns for different materials using the finite element method (FEM) based on the block Lanczos and full-solution methods. The newly designed horns achieved a higher amplitude ratio and lower stresses in comparison to the Bezier and industrial stepped LTC horns with the same length, end diameters and operating conditions. The novel cubic polynomial LTC ultrasonic horn was found superior to its catenoidal counterpart as a result of an 8.45% higher amplitude ratio. However, the catenoidal LTC ultrasonic horn exhibited 1.87% lower stress levels. The position of the helical slots was found to have the most significant influence on the vibration characteristics of LTC ultrasonic horns followed by the width, depth and angle. This high amplitude ratio will contribute to the improved vibration characteristics that will help realize good surface morphology when machining advanced materials.

Design of Longitudinal Torsional Ultrasonic Transducer and Its Performance Test

Design and experimental study of longitudinal-torsional ultrasonic transducer with helical slots considering the stiffness variation

Design and Characteristics Study of Longitudinal–Torsional Piezoelectric Ultrasonic Transducers

The Design And Finite Element Analyses Of The Super-Long Ultrasonic Amplitude Transformer

Design and Experimental Study of Longitudinal-Torsional Composite Ultrasonic Internal Grinding Horn

Longitudinal wave propagation in a rod with variable cross-section

Design of piezoelectric torsional transducer of hybrid transducer type USM and analyses of its properties

Frequency coupling design of ultrasonic horn with spiral slots and performance analysis of longitudinal-torsional machining characteristics

Design, simulation, and adjustment of the longitudinal–torsional composite integrated ultrasonic variable amplitude system

Development of a Radial-Torsional Vibration Hybrid Type Ultrasonic Motor with a Hollow and Short Cylindrical Structure

Longitudinal–Torsional Frequency Coupling Design of Novel Ultrasonic Horns for Giant Magnetostrictive Transducers

Design of Ultrasonic Transducer with a Quarter Wavelength Composite Exponential Horn

The Longitudinal-Vibration Model of the Hybrid Longitudinal-Torsional Ultrasonic Motor

Design and Experiment Study of Ultrasonic Longitudinal-Torsional Compound Consolidation Vibration System for Metal Foil

Design and Analysis of Ultrasonic Composite Transducer with a Quarter-wave Taper Transition Horn

Design of a novel 2D ultrasonic transducer for 2D high-frequency vibration–assisted micro-machining

Performance Analysis of the Longitudinal-Torsional Ultrasonic Milling of Ti-6Al-4V

Research and Fabrication of High-Frequency Broadband and Omnidirectional Transmitting Transducer

Design of Longitudinal-Bending Coupled Horn of a Giant Magnetostriction Transducer

The Study of Characteristics on the Longitudinal-Torsional Ultrasonic Motor

Design and test of a small high frequency ultrasonic cleaning transducer