Abstract:Sandwich piezoelectric transducers are widely used in many industrial applications due to their attractive advantages of compact structure, no electromagnetic interference, and excellent output performance. V-shaped piezoelectric transducers, a typical design, have been adopted as the stator of ultrasonic motors and the machining tool of elliptical vibration surface manufacturing. However, traditional V-shaped piezoelectric transducers were designed with one contact interface to output effective vibration, limiting their applications. To achieve multi contact areas with synchronous actuation function, a novel three-dimensional sandwich piezoelectric transducer is proposed in this study, expecting to drive wheels of a robotic mobile system. Two orthogonal Langevin transducers are adopted to vertically couple in a cylinder, producing two bending vibrations with a spatial phase difference of pi/2 in the cylinder. Therefore, elliptical motion is generated at surface points of two driving parts placed at both ends of the cylinder. Due to the fact that two front-end blocks of the two Langevin transducers and the cylinder form a three-dimensional configuration which hard to be manufactured by traditional machining methods, this part is printed using laser additive manufacturing. To analyze the dynamic behavior of the proposed three-dimensional transducer, an analytical model is carried out utilizing the transfer matrix method for providing systematic modeling. This developed transfer matrix model is not only capable of greatly reducing computation efforts, and it is maybe suitable for the analysis of traditional V-shaped transducers. To validate this developed transfer matrix model and confirm the feasibility of the transducer design, experimental investigations are conducted to measure the vibration characteristics of the proposed transducer prototype using a 3D laser Doppler vibrometer and are compared to the calculation results. The measured and computed resonant frequencies of the transducer are 19.975 kHz and 20.045 kHz for the symmetrical vibration mode, and 20.07 kHz and 20.06 kHz for the anti-symmetrical vibration mode, respectively. Comparisons show that calculation results match well with the experimental results, demonstrating the effectiveness of the developed transfer matrix model and the feasibility of the three-dimensional transducer design. (C) 2018 Elsevier Ltd. All rights reserved.

Design and Characteristics Study of Longitudinal–Torsional Piezoelectric Ultrasonic Transducers

Design of Longitudinal Torsional Ultrasonic Transducer and Its Performance Test

Design of piezoelectric torsional transducer of hybrid transducer type USM and analyses of its properties

Design and experimental study of longitudinal-torsional ultrasonic transducer with helical slots considering the stiffness variation

Design and Experimental Study of Longitudinal-Torsional Composite Ultrasonic Internal Grinding Horn

Design of wide-band longitudinal mode piezoelectric transducers with impedance matching layers

A Novel Additive Manufactured Three-Dimensional Piezoelectric Transducer: Systematic Modeling and Experimental Validation

Investigation of Deep-Sea Longitudinal Vibration Cavity Resonant Coupling Transducers Made of Relaxor Ferroelectric Single-Crystal Material

Research and Fabrication of High-Frequency Broadband and Omnidirectional Transmitting Transducer

Innovative Design and Analysis of a Longitudinal-Torsional Transducer with the Shared Node Plane Applied for Ultrasonic Assisted Milling

Modeling of Coupled Longitudinal and Bending Vibrations in a Sandwich Type Piezoelectric Transducer Utilizing the Transfer Matrix Method

Parametric Analysis and Optimization of Radially Layered Cylindrical Piezoceramic/Epoxy Composite Transducers

Design and Fabrication of 1-3 Piezoelectric Composite Material Air Coupled Ultrasonic Transducer

Integrated high-frequency piezoelectric transducer within radial critical dimension of piezoceramics

Design of Piezoelectric Ultrasonic Transducer Based on Doped PDMS

Theoretical Modeling and Experimental Investigation of a V-Shaped Traveling Wave Piezoelectric Transducer for Ultrasonic Cavitation Peening: Part B

Design of a novel 2D ultrasonic transducer for 2D high-frequency vibration–assisted micro-machining

Fabrication and Characterization of High-Sensitivity Ultrasonic Transducers with Functionally Graded Design

Design of Radial Composite Longitudinal Vibration Piezoelectric Transducer Excited by Four Piezoelectric Stacks

Investigation on Radial Composite Round Tube Piezoelectric Ceramic Ultrasonic Transducer

Design of a longitudinal-torsional composite ultrasonic vibration machining system and its natural frequencies merging