Abstract:Large or carcinogenic bone defects may require a challenging bone tissue scaffold design ensuring a proper mechanobiological setting. Porosity and biodegradation rate are the key parameters controlling the bone-remodeling process. PLA presents a great potential for geometrically flexible 3-D scaffold design. This study aims to investigate the mechanical variation throughout the biodegradation process for lattice-type PLA scaffolds using both experimental observations and simulations. Three different unit-cell geometries are used for creating the scaffolds: basic cube (BC), body-centered structure (BCS), and body-centered cube (BCC). Three different porosity ratios, 50 %, 62.5 %, and 75 %, are assigned to all three structures by altering their strut dimensions. 3-D printed scaffolds are soaked in PBS solution at 37 °C for 15, 30, 60, 90, and 120 days both unloaded and under dead load. Water absorption, weight loss, and compression stiffness are measured to characterize the first-stage degradation and investigate the possible influences of these parameters on the whole biodegradation process. The strength reduction stage of biodegradation is simulated by solving pseudo-first-order kinetics-based molecular weight change equation using FEA with equisized cubic (voxel-like) elements.For the first stage, mechanical load does not have a statistically significant effect on biodegradation. BCC with 62.5 % porosity shows a maximum water absorption rate of around 25 % by the 60th day which brings an advantage in creating an aquatic environment for cell growth. Results indicate a significant water deposition inside almost all scaffolds and water content is determined to be the main reason for the retained or increased compression stiffness. A distinguishable stiffness increase in the initial degradation process occurs for 75 % porous BC and 50 % porous BCC scaffolds. Following the quasi-stable stage of biodegradation, almost all scaffolds lost their rigidity by around 44–48 % within 120 days based on numerical results. Therefore, initial stiffness increase in the quasi-stable stage of biodegradation can be advantageous and BCC geometry with a porosity between 50% and 62 % is the optimum solution for the whole biodegradation process.

Effect of Mechanical Stimulation on the Degradation of Poly(lactic Acid) Scaffolds with Different Designed Structures

Effect of Nonaffine Displacement on the Mechanical Performance of Degraded PCL and Its Graphene Composites: an Atomistic Investigation

Degradation of 3D-Printed Porous Polylactic Acid Scaffolds Under Mechanical Stimulus

Influence Of Mechanical Loads On Degradation Of Scaffolds

A Cellular Automaton Simulation of the Degradation of Porous Polylactide Scaffold: I. Effect of Porosity

Effect of Cyclic Loading on in Vitro Degradation of Poly(L-Lactide-Co-Glycolide) Scaffolds

Degradation mechanisms and acceleration strategies of poly (lactic acid) scaffold for bone regeneration

Effect of Size on Degradation of Porous Poly (lactic Acid) Scaffold

Preparation of Open-Porous Stereocomplex PLA/PBAT Scaffolds and Correlation Between Their Morphology, Mechanical Behavior, and Cell Compatibility.

In Vitro Degradation of Poly(D,L-lactic Acid) Scaffolds

Effects of Mechanical Stress on the in Vitro Degradation of Porous Composite Scaffold for Bone Tissue Engineering

In situ comparison of osteogenic effects of polymer-based scaffolds with different degradability by integrated scaffold model

Effects of Porosity and Pore Size on in Vitro Degradation of Three-Dimensional Porous Poly(d,l-Lactide-co-glycolide) Scaffolds for Tissue Engineering.

Degradation behavior of 2D auxetic structure with biodegradable polymer under mechanical stress

Effect of degradation in polymer scaffolds on mechanical properties: Surface vs. bulk erosion

Comparison of the Degradation Behavior of PLGA Scaffolds in Micro-Channel, Shaking, and Static Conditions.

Experimental Evaluation of the Effect of Degradation on the Mechanical Behavior and Morphometric Characteristics of Functionally Graded Polymer Scaffolds

Mechanical deviation in 3D-Printed PLA bone scaffolds during biodegradation

Effects Of Scaffold Design Parameters And Local Environment On Biopolymer Scaffold Degradation

Structural mechanics of 3D-printed poly(lactic acid) scaffolds with tetragonal, hexagonal and wheel-like designs.

A study on the in vitro degradation properties of poly(l-lactic acid)/β-tricalcuim phosphate(PLLA/β-TCP) scaffold under dynamic loading