Abstract:Rechargeable lithium–sulfur batteries (LSBs) have caused widespread concern because of their high theoretical energy density and environmental benefits. However, LSBs accompany a series of phase transitions of which occur significant volume changes during charging and discharging, which severely reduce the lifetimes of LSBs. In this study, a supramolecular eco-binder with in situ-cross-linking is investigated to extend the charge–discharge cycle of LSBs. Specifically, a vegetable-oil-based cationic waterborne polyurethane polymer with phytic acid (WPUP) is developed as an eco-binder for sulfur cathodes. A low-viscosity WPUP is used in the electrode fabrication process to achieve homogeneous, dense coating of the active materials. The WPUP participates in an in situ covalent cross-linking reaction to produce a three-dimensional network with excellent mechanical properties. This ensures robust adhesion and much shorter ion- and electron-transfer paths. The resultant sulfur cathodes compose of high initial discharge capacity of 1051 mAh g–1 at 0.5 C, promising long-term battery cycling stability (632 mAh g–1 after 600 charge/discharge cycles at 0.5 C), and high rate cycling performance (634 mAh g–1 at 4 C). As proof-of-concept, a Li–S full cell is fabricated with a 350% oversized lithium anode. It provides a good capacity of 1.3 mA h cm–2 and high capacity retention of 99.83% per cycle over 300 cycles. This binder-design strategy will be important in developing high-capacity and long cycle stable LSBs.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsaem.1c00207?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsaem.1c00207</a>.FTIR, viscosity, CV profiles, voltage profiles, the first discharge–charge profiles of the binders and their S cathodes (<a class="ext-link" href="/doi/suppl/10.1021/acsaem.1c00207/suppl_file/ae1c00207_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Exploiting Pulping Waste As an Ecofriendly Multifunctional Binder for Lithium Sulfur Batteries

A Multi Functional Binder with Lithium Ion Conductive Polymer and Polysulfide Absorbents to Improve Cycleability of Lithium–sulfur Batteries

Peach Gum As an Efficient Binder for High-Areal-capacity Lithium–sulfur Batteries

In Situ-Cross-linked Supramolecular Eco-Binders for Improved Capacity and Stability of Lithium–Sulfur Batteries

Exploiting a Robust Biopolymer Network Binder for an Ultrahigh-Areal-capacity Li–S Battery

An eco-friendly composite binder with robust network and strong affinity for long-lifespan high-loading Li-S batteries

Multifunctional water-soluble binders for Li-S batteries

Sulfur Electrode Tolerance and Polysulfide Conversion Promoted by the Supramolecular Binder with Rare-Earth Catalysis in Lithium-Sulfur Batteries

Water-based phytic acid-crosslinked supramolecular binders for lithium-sulfur batteries

A Robust Aqueous-Processable Polymer Binder for Long-Life, High-Performance Lithium Sulfur Battery

Bioinspired Binders Actively Controlling Ion Migration and Accommodating Volume Change in High Sulfur Loading Lithium–Sulfur Batteries

Water‐Soluble Cross‐Linking Functional Binder for Low‐Cost and High‐Performance Lithium–Sulfur Batteries

Bifunctional Binder Enables Controllable Deposition of Polysulfides for High-Loading Li-S Battery

Cost-Effective Water-Soluble Poly(vinyl Alcohol) As a Functional Binder for High-Sulfur-Loading Cathodes in Lithium–Sulfur Batteries

Multifunctional Binder Designs for Lithium-Sulfur Batteries

Multifunctional Cross-Linked Polymer-Laponite Nanocomposite Binder for Lithium-Sulfur Batteries

Water-Soluble Linear Poly(ethylenimine) As a Superior Bifunctional Binder for Lithium–Sulfur Batteries of Improved Cell Performance

A Novel Polar Copolymer Design As a Multi-Functional Binder for Strong Affinity of Polysulfides in Lithium-Sulfur Batteries

A Conductive Binder Based on Mesoscopic Interpenetration with Polysulfides Capturing Skeleton and Redox Intermediates Network for Lithium Sulfur Batteries

Suppressing Polysulfide Shuttling in Lithium–Sulfur Batteries via a Multifunctional Conductive Binder

Water-Based Dual-Crosslinked Polymer Binders for High-Energy-Density Lithium-Sulfur Batteries.