Abstract:This paper illustrates a composite design of thin hard AlNi3 coating on soft stainless steel for making the improved impact resistance. The coating layer with a thickness of 0.21 +/- 0.01 mm is plasma sprayed on the top and bottom surfaces of the machined AISI 304 stainless steel. It is composed of the brittle intermetallic compounds of AlNi3 phase toughened by solid-solution elements of Cr, Fe and Si. It has a higher hardness (900 +/- 90 HV0.2) than that of the stainless steel substrate (250 HV0.2). The machined and coated samples were subjected to impact loadings at different gas gun pressures operated by split Hopkinson pressure bar. For comparison, quasi-static compression tests were also conducted. Then, the mechanical data and plastic deformation under various rate loadings are achieved. The confinement effects of thin hard coating on dynamic plastic deformation of soft stainless steel are revealed. The inherent mechanisms are clarified. It is full of interest to develop a valid route of improving the impact-resistant performance of soft materials by composite design.

Composite Design of Thin Hard AlNi3 Coating on Soft Stainless Steel for Making the Improved Impact Resistance