Abstract:The use of carbon fiber reinforced plastic (CFRP) is rapidly increasing in aerospace and automobile applications. This is in large part due to the increase strength and modulus of carbon fiber composites compared to other materials such as glass fiber composites. The fiber-matrix interface has been found to be important for high strength in composites. Methods that have been studied and developed to improve interfacial property of composites include: the addition of coupling agents, surface modifications, chemical reaction control and use of nano-fillers for reinforcement. During mechanical loading the shape of carbon fibers, in a composite, is altered with a concomitant change in electrical resistance. Carbon fibers are used as sensing elements in CFRP due to their electrical conductivity. In some more advanced studies, in CRFP, the carbon fibers were used for both strain sensing and damage sensing. The basic theory, in such studies, was that the movement of carbon fiber could be detected by electrical resistance measurement. During loading, the extent of contact between carbon fibers in a CF tow is altered, and the electrical resistance changes from its initial value. In this work, interfacial properties of carbon fiber/polymer composites were evaluated by such electrical resistance measurements. During the wetting process of CF tows by the polymer resins, the change in electrical resistance was recorded and analyzed. The test results for different carbon fibers and polymer resins exhibited different trends. The electrical resistance change was associated with the different wetting conditions, and the interfacial properties were predicted by these electrical resistance measurements. CF tow/epoxy exhibited the poorest carbon tow wettability, the smallest change in resistance and the poorest IFSS and ILSS. For the four systems studied, the relative change in each of these quantities for the materials of a given composite was roughly proportional to the other measured quantities. This may have some very significant practical importance. It may point the way to use quick easy tests to screen and predict other behaviors for composites of different materials and/or processes. Perhaps a simple resistance change test might be used to predict and select good candidate materials, surface processing techniques for high strength composite applications. The proportional relationship between interfacial adhesion and electrical resistance change was obtained by trend fitting line analyses. Ultimately, it was demonstrated that mechanical properties related to interfacial properties might potentially be predicted by electrical resistance measurement and studies of wetting behavior, using empirical formulas and correlations.

Size Effect on Microbond Testing Interfacial Shear Strength of Fiber-Reinforced Composites

Effect of sizing on the interfacial shear strength of carbon fiber/epoxy resin monofilament composite

Microdroplet Pull-out Testing: Significance of Fiber Fracture Results

Interfacial Evaluation Of Carbon Frinforced Nano-Composites Using Electrical Resistance Measurement With Wetting Tests

A novel approach based on stress-impedance effect to assess the interfacial properties in fiber-reinforced composites

Temperature-Dependent Interfacial Debonding and Frictional Behavior of Fiber-Reinforced Polymer Composites

Pre-use Interfacial Shear Strength Prediction for Fiber-Reinforced Thermosetting Composites Based on Stress-Impedance Effect of Ferromagnetic Microwires

Assessment Of Interfacial Adhesion Between Carbon Fiber And Epoxy By Transverse Fiber Bundle And Single Fiber Fragmentation Tests

Effect of Shear Resistance on Flexural Debonding Load-Carrying Capacity of RC Beams Strengthened with Externally Bonded FRP Composites

Experimental and Numerical Study of the Interfacial Shear Strength in Carbon Fiber/Epoxy Resin Composite under Thermal Loads

Effect of Carbon Fiber Surface Microstructure on Composite Interfacial Property Based on Image Quantitative Characterization Technique

Interaction of Multiple Micro-Defects on the Strength and Failure Mechanism of UD Composites by Computational Micromechanics

A SIZE EFFECT STUDY ON THE SPLITTING CRACK INITIATION AND PROPAGATION IN OFF-AXIS LAYERS OF COMPOSITE LAMINATES

Effect of the Thickness on the Fracturing Behavior of Discontinuous Fiber Composite Structures

Scaling Effect of Dry Adhesion for Microfibrils and Transition Size to Flaw Insensitivity

Estimation of Aramid Fiber/epoxy Interfacial Properties by Fiber Bundle Tests and Multiscale Modeling Considering the Fiber Skin/core Structure

Fracturing Behavior and Size Effect of Discontinuous Fiber Composite Structures with Different Platelet Sizes

Mechanism of the impact of the sizing agent chain length on the interfacial mechanical properties of carbon/epoxy composites

Experimental and numerical study of the interfacial properties in self-reinforced polyimide composites

A cohesive zone model incorporating a Coulomb friction law for fiber-reinforced composites

Fracture Behavior and Size Effect of UHPFRC: Experimental and Mesoscale Numerical Investigation