Abstract:Cohesive powders cannot flow freely in the silo and even behave like solid, which brings a great challenge to the powder handling process. Aeration is an effective method used to break the arch structure formed above the silo outlet and to promote the powder flow. However, it is difficult to determine the solid-liquid transition behaviors and to predict the critical arch-breaking gas flow rate in the aerated discharge systems. In this paper, cohesive powders including alumina (Al2O3), pulverized coal (COAL) and calcium carbonate (CaCO3) were used as experimental materials. Powder flow properties were characterized by conducting shear test, permeability test, and aerated discharge experiment. Unconfined yield strength of powders under zero pre-consolidated stress was obtained based on using a linear extrapolation procedure of shear parameters. Aerated discharge characteristics of cohesive powders were determined and, the critical condition corresponding to the transition from solid-like to liquid-state and the stable condition distinguishing the funnel flow pattern and mass flow pattern were defined, respectively. The Brown and Richards model, and the flow/no-flow criterion of Jenike were modified to describe the powder flow state and to predict the solid mass flow rate under the action of aeration by introducing the positive gas pressure gradient. A logical algorithm was proposed to predict the critical arch-breaking gas flow rate by assuming the same gas distribution coefficient under different aeration conditions. As a precondition, the critical solid mass flow rate was calculated by an iterative algorithm giving the same order of magnitude of that from the experiment, which was further related to the stable solid mass flow rate and the powder permeability index. This simplification provided us with satisfactory results for all the powders producing errors generally less than 30%, a more easy-to-operate method to determine the critical arch-breaking gas flow rate.

Multiscale Analysis of Powder-Propellant Conveying Stability Through a Nozzle

Multi-Scale Analysis of Acoustic Emission Signals in Dense-Phase Pneumatic Conveying of Pulverized Coal at High Pressure

Multi-Scale Study of Particle Flow in Silos

Effect of Non - uniform Suspended Particle Distribution on stability of Jet

Effects of Coherent Structures on Nanoparticle Coagulation and Dispersion in a Round Jet

Research on Stability of Dense Gas-particle Two-phase Jets

Flow instability of nanofuilds in jet

Deagglomeration of Airborne Nanoparticles in a Decelerating Supersonic Round Jet

Research on Stability of Interface of Jet Containing Suspended Solid Particles

Analysis Of Fluidizing Stability In Dense Prase Powder Feeder

Asymmetric oscillation of pressurized dense gas-solid jet in a two-dimensional nozzle

Numerical Study of Powder Particle Flight Behavior during Gas Detonation Spraying Process

Linear stability and numerical analysis of vertical dense particulate flows in hydraulic conveying

Numerical simulation and experimental investigation on powder transport of a new-type annular coaxial nozzle

Analysis of gas-solid flow characteristics in intricate pipelines

The effects of flow structure and particle mass loading on particle dispersion in particle-laden swirling jets

Shock Wave and Aeroelastic Coupling in Overexpanded Nozzle

Numerical simulation of the flow behavior and powder spreading mechanism in powder bed-based additive manufacturing

Linear instability analysis of a shear thinning gelled jet with yield stress in coaxial atomization

Study on solid-liquid transition behaviors of cohesive powders and predict the critical arch-breaking gas flow rate

Effects of nanoparticles on the instability of liquid jets in a gaseous crossflow