Abstract:We investigate the strain-rate-dependent mechanical behavior and deformation mechanisms of a refractory high entropy alloy, Ti29Zr24Nb23Hf24 (at.%), with a single-phase body-centered cubic (BCC) structure. High-temperature compression tests were conducted at temperatures from 700 to 1100°C at strain rates ranging from 10-3 to 10 s-1. A sudden stress drop after yield point was observed at higher temperatures and lower strain rates with the Zener-Holloman parameter, lnZ, in the range of 17.2-20.7. Such a softening behavior can be related to the interaction of dislocations with short-range clustering. However, at higher strain rates or lower temperatures (lnZ>25.0), kink bands were activated being responsible for the continuous strengthening of the alloy in competition with the softening mechanism. Systematic TEM investigations reveal that dislocation walls formed along {110} planes and dislocation loops were observed at a low strain of 6% at a high strain rate of 1 s-1 and 800°C. Kink band induced dynamic recrystallization is evident upon further straining. On the other hand, at low strain rate of 10-3 s-1 and 800°C, discontinuous recrystallization mechanisms become dominant with arrays of dislocations forming in front of the bulged boundaries of parent grains. These sub-grain boundaries eventually turn into high-angle grain boundaries. We also investigate the deformation mechanism of the alloy under extremely high strain rate (103 s-1) at room temperature. The specimen exhibits extensive kink bands with arrays of dislocation walls. As further strained, multiple slip systems can be activated and the interaction of dislocation walls plays a vital role in the strain hardening of the alloy.

High Temperature Internal Friction in Ni50.3Ti29.7Zr20 Shape Memory Alloy

Stress-assisted Atomic Diffusion in NiTiHf Shape Memory Alloys

In Situ Synchrotron Radiation X-ray Diffraction Study on Phase and Oxide Growth during a High Temperature Cycle of a NiTi-20 at.% Zr High Temperature Shape Memory Alloy

Zr50Cu25Ni7.5Co17.5 high-temperature shape memory alloy with excellent thermal stability and large recovery strain, and the associated microstructural deformation mechanism

Strain-Rate-Dependent Deformation Behavior of Ti29Zr24Nb23Hf24 High Entropy Alloys at Elevated and Room Temperature

Effects of cooling rate on martensitic transformation behavior and shape memory property for Ni-rich NiTiHf-Nb high-temperature shape memory alloy

The Tensile Behavior of Ti36Ni49Hf15 High Temperature Shape Memory Alloy

Ultra-high temperature shape memory in high-Hf content NiTiHf alloys

High isothermal internal friction over a large temperature range for dual-phase Ni–Mn–In magnetic shape memory alloy

Characteristics of Ti50Pd30Ni20 high-temperature shape memory alloy

High-temperature Shape Memory Properties of Cu15Ni35Ti25Hf12.5Zr12.5 High-Entropy Alloy

Internal Friction Behaviors of Ni-Mn-In Magnetic Shape Memory Alloy with Two-Step Structural Transformation

The Role of H-phase in Thermal Hysteresis and Shape Memory Properties in Ni50Ti30Hf20alloy

Two-way Shape Memory Effect in a Ti–Zr–Nb–Ta High-Temperature Shape Memory Alloy

Effect of Zr Element Addition on the Mechanical Behavior of Ti48.5-Xni49.5nb2 Alloy

Mechanism of internal friction in Cu–Al–Mn shape memory alloy

Study on Properties of Stress Relaxation for NiTiNb Shape Memory Alloy

Internal Friction of Nano-Grained Fe-25%Ni Alloy Bulk

Thermal Stability and High-Temperature Shape Memory Effect of Ti–Ta–Zr Alloy

Effect of Ti/Ni and Hf/Zr ratio on the martensitic transformation behavior and shape memory effect of TiNiHfZr alloys

Study of the Thermal Physical Properties of Ti47Ni44Nb9 Wide Hysteresis Shape Memory Alloy