Abstract:Abstract Hydraulic fracturing is an important method to improve the oil and gas production in low and ultra-low permeability reservoirs. A remarkable progress has been made in the technology and materials. However, the existing conventional hydraulic fracturing technology faces problems, such as reservoir damage, equipment abrasion, low effective propped area, and early screen-out. Therefore, a novel self-propped fracturing fluid (SPFF) was proposed, which remains in the liquid-phase before entering the fracture, and forms solid proppant particles when stimulated by the reservoir temperature after entering the fracture (Chemical proppant, CP). In this paper, the micro-morphology of CP was studied by SEM, and the temperature of the CP-formed was measured by the CP formation experiments at room temperature and field conditions. Furthermore, the compressive strength, thermal stability, stability in formation fluid, acid and alkali, leak-off, core damage, and fracture conductivity of the developed SPFF were tested. The test results show that the leak-off volume and core damage level of SPFF were less than that of conventional fracturing fluid, thereby effectively reducing the damage to the reservoir permeability. The CP exhibited good performance in terms of compressive strength, thermal stability, stability in reservoir fluid and treatment fluid. Besides, the conductivity of the propped fracture was high. These advantages determine that CP can meet the field treatment requirements. The CP could enter any narrow fractures, and effectively solved the existing problems in the conventional fracturing technology by significantly improving the fracturing effect, especially the network fracturing effect in tight reservoir systems.

Fabrication of Low-density Heat-Resistance Polystyrene/Carbon Black Composite Microspheres Used as Hydraulic Fracturing Proppant

Facile and Controllable Preparation of Poly(St-co-MMA)/FA Microspheres Used as Ultra-Lightweight Proppants

Constructing low-cost and high-strength ultra-low-density proppants based on the modification of activated carbon framework with in-situ hydrolyzed silane

Preparation of low density, high-strength, strong hydrophobic particles (LHSPs) and its application as oil fracturing proppant

Progress of Polymer Application in Coated Proppant and Ultra-Low Density Proppant

Cross-Linked Polystyrene Microspheres As Density-Reducing Agent in Drilling Fluid

Preparation and Lubricating Properties of Polystyrene Composite Microspheres

The Synthesis of Polymeric Nanospheres and the Application as High-Temperature Nano-Plugging Agent in Water Based Drilling Fluid

Core-shell Structured Polystyrene Microspheres for Improving Plugging Performance of Oil-based Drilling Fluids

Chemical Proppant Generated in the Fracture from the Novel Fracturing Fluid System

Insight into thermo-mechanical enhancement of polymer nanocomposites coated microsand proppants for hydraulic fracturing

Preparation and Properties of Lightweight Amphiphobic Proppant for Hydraulic Fracturing

Novel hydraulic fracturing fluids with improved proppant carrying capacity and pH-adjustable proppant deposition behavior

Rheological Behavior of Carbon Black Filled Polystyrene Melts

Use of modified polystyrene micro-nano spheres to improve the inhibition and plugging performance of water-based drilling fluids

Preparation of polystyrene/EVA/CaCO3 microspheres using a novel one-pot method via a phase inversion emulsion process

Ultra-Low-Density Drilling Fluids for Low-Pressure Coefficient Formations: Synergistic Effects of Surfactants and Hollow Glass Microspheres

Carbon dots enhanced ultra‐low‐density fluorescence proppants with both high‐compressive strength and anti‐deformation ability

Preparation and characterization of a self-suspending ultra-low density proppant

Ultralow Friction Polymer Composites Incorporated with Monodispersed Oil Microcapsules

Improvement of Emulsion Stability and Plugging Performance of Nanopores Using Modified Polystyrene Nanoparticles in Invert Emulsion Drilling Fluids