Abstract:The construction of new bridge piles adjacent to existing subway tunnels poses a significant threat to the safety of the tunnels. To accurately assess the impact of the construction of the steel casing of bridge piles on nearby subway tunnels, a simplified analytical method incorporating a mechanical model is developed in this study. Specifically, modified calculation formulas for the additional force are proposed, taking into consideration the characteristics of casing segmental construction and the soil-squeezing effect. The two-stage analysis method is employed to determine the additional stress and longitudinal vertical deformation of the tunnel. Subsequently, a series of calculations are performed to gain further insights into the effects of varying lengths and diameters of bridge piles, as well as the relative distance between the pile and tunnel on the tunnel-pile interactions. As the construction depth increases, the existing tunnel experiences a slight initial rise followed by progressively larger settlement that eventually levels off. The maximum settlement exhibits a linear increase with the increasing length and diameter of the bridge piles, while it exponentially increases with decreasing relative distance between the pile and tunnel. Moreover, impact zones of varying degrees of the bridge pile construction on the nearby tunnel are proposed. Based on the Response Surface Methodology, the relative distance is found to exert the greatest influence on the deformation of the existing tunnel, and an optimal relationship among the parameters is provided. The theoretical results are well validated with field-measured data from a representative engineering project and numerical simulation results. The proposed solution can be proved to offer reasonable theoretical support for risk assessment of tunnels under the influence of adjacent piles construction.

Behavior and Analysis of Unsymmetrical Double Barrel Precast Concrete Box Culverts with Posttensioning Bars

Theoretical Analysis of Longitudinal Vertical Displacement of Subway Tunnels Caused by the Construction of Steel Casings for Bridge Piles

Analytical Calculation Method of Seismic Resistant Response for Posttensioned Precast Bridge Piers

Numerical Analysis of Ultimate Strength of Concrete Filled Steel Tubular Arch Bridges

Design and mechanical properties of U-section precast concrete box culverts

Seismic Behavior of Pc Column and Steel Beam Composite Moment Frame with Posttensioned Connection

Approach for Analyzing the Ultimate Strength of Concrete Filled Steel Tubular Arch Bridges with Stiffening Girder

Mechanical Behavior of Box Girder Bridge with Partial Corrugated Steel Webs

Experimental and Finite Element Analysis of Precast Reinforced Concrete U-Shaped Box Culvert

Experimental Study and Numerical Simulation on Failure Process of Reinforced Concrete Box Culvert

Influence of Haunch Geometry and Additional Steel Reinforcement on Load Carrying Capacity of Reinforced Concrete Box Culvert

Finite Element Analysis of Concrete Box Culverts

Design Of Concrete-Filled Steel Tubular Chs Connections In Tension

Experiments and Numerical Simulation of the Reinforcement Effect of Channel-Steel-reinforced Shield Tunnel Segments under Unloading Conditions

Static and Dynamic Behavior of Continuous Box Girder Bridge and Its Experimental Investigation

Research on bearing behaviour of buried double corrugated steel culvert with high fill considering spacing effect

Force Analysis of Supporting System during Form-Work Construction of Box Culvert without Tie Rod

Research on the method of identifying vertical earth pressure of hinged prefabricated culvert box culvert on the top slab

Research on Deformation Characteristics of Tunnel Box Culvert Structure under Different Construction Loads

Full-Scale Experiment and Ultimate Bearing Capacity Assessment of Reinforced Concrete Drainage Culverts with Defects

Analysis of underground post-tensioned precast concrete box utility tunnel under normal fault displacement