Abstract:In order to improve the mechanical properties of polycaprolactone ( PCL) fibrous scaffolds, electro-spun pure fibrous scaffolds and composite fibrous scaffolds at various cellulose nanocrystals ( CNCs) loading levels were prepared. Obtained by acid hydrolysis, the CNCs were used as a reinforcement. The morphology, crystallinity as well as thermal and mechanical properties of CNCs-filled and unfilled fibrous scaffolds were examined by the scanning e-lectron microscopy ( SEM) , wide angle X-ray diffraction ( WXRD) , thermogravimetric analysis ( TG) , and tensile testing. The influences of the CNCs on the cell compatibility of the PCL fibrous scaffolds were also explored. The SEM images of the obtained fibrous scaffolds demonstrated that the nanofibers were successfully prepared and the av-erage diameter of the fibers for the scaffolds increased slightly and then decreased with the increased CNCs loading in the fibrous scaffold. The thermal stabilities of the CNCs-reinforced fibrous scaffolds were not higher than electro-spun pure PCL fibrous scaffolds. The crystallinity of the fibrous scaffolds also increased firstly and then decreased with the increase in CNCs loading. Furthermore, the optimal reinforcement conditions of the PCL fibrous scaffolds were ob-tained, which was 5.25％ of the mass ratio of m( CNCs)/m( PCL) . The mechanical strength and elongation at break of the PCL/CNCs scaffolds at 5.25％ CNCs loading increased by 291％ and 320％, respectively, compared with the pure PCL fibrous scaffolds. In addition, pancreatic ductal cancer cells ( Panc-1) and hepatic cells ( HL7702) derived from human adult were successfully cultured on the PCL/CNCs composite fibrous scaffolds. The results of one-way variance analysis of the proliferation rate for Panc-1 on PCL and CNCs/PCL composite fiber scaffolds indicated that the CNCs did not increase the cytotoxicity of the PCL composite fibrous scaffolds. The CNCs could be used as a rein-forcing material to fabricate nanocomposite fibrous scaffolds with good mechanical properties and cytocompatibility through electrospinning, which provided feasible approaches for the application of the CNCs in tissue engineering.

Fabrication and improvement of PCL/alginate/PAAm scaffold via selective laser sintering for tissue engineering

The Preparation and Characterization of Porous Scaffolds Based on Poly-ε-caprolactone via Selective Laser Sintering

In-situ Re-Melting and Re-Solidification Treatment of Selective Laser Sintered Polycaprolactone Lattice Scaffolds for Improved Filament Quality and Mechanical Properties

Preparation of Open-Porous Stereocomplex PLA/PBAT Scaffolds and Correlation Between Their Morphology, Mechanical Behavior, and Cell Compatibility.

Characterization of Porous Scaffolds Based on Polycaprolactone/Eggshell Preparedvia Selective Laser Sintering

Studies on the Selective Laser Sintering of High Molecular Weight Poly(d,l-Lactic Acid)

Fabrication of porous polyvinyl alcohol scaffold for bone tissue engineering via selective laser sintering.

Selective Laser Sintering Process Optimization for Layered Manufacturing of CAPA® 6501 Polycaprolactone Bone Tissue Engineering Scaffolds

Characterization on Modification and Biocompatibility of PCL Scaffold Prepared with Near-field Direct-writing Melt Electrospinning

Fabrication of cellular poly-/spl isin/-caprolactone (PCL) scaffolds by precision extruding deposition process

On 3D printed thermoresponsive PCL-PLA nanofibers based architected smart nanoporous scaffolds for tissue reconstruction

Mechanical properties' improvement of a tricalcium phosphate scaffold with poly-l-lactic acid in selective laser sintering.

Preparation and mechanical properties of poly(chitosan-g-DL-lactic acid) fibrous mesh scaffolds

Fabrication of 3D Printed PCL/PEG Polyblend Scaffold Using Rapid Prototyping System for Bone Tissue Engineering Application

Synergistic fabrication of micro-nano bioactive ceramic-optimized polymer scaffolds for bone tissue engineering by in situ hydrothermal deposition and selective laser sintering

Fabrication and characterization of electro-spun composite fibrous scaffolds for tissue engineering by CNCs-reinforced PCL

Precision Extruding Deposition (PED) Fabrication of Polycaprolactone (PCL) Scaffolds for Bone Tissue Engineering

Design and Additive Manufacturing of Flexible Polycaprolactone Scaffolds with Highly-Tunable Mechanical Properties for Soft Tissue Engineering

Development and Characterization of PLA/PCL Blend Filaments and 3D Printed Scaffolds

Development of polycaprolactone/chitosan blend porous scaffolds

Development of Composite Porous Scaffolds Based on Poly(lactide-Co-glycolide)/nano-hydroxyapatite Via Selective Laser Sintering