Ecological and individual effects in childhood immunisation uptake: a multi-level approach.

K. Jones,G. Moon,A. Clegg

DOI: https://doi.org/10.1016/0277-9536(91)90332-7

Social Science & Medicine (1967)

Abstract:

What problem does this paper attempt to address?

Comparison of biophysical stimuli for mechano-regulation of tissue differentiation during fracture healing.

H. Isaksson,W. Wilson,C. V. van Donkelaar,R. Huiskes,Keita Ito

DOI: https://doi.org/10.1016/J.JBIOMECH.2005.01.037

IF: 2.4

Journal of Biomechanics

Abstract:
Promotion of In Vitro Osteogenic Activity by Melt Extrusion-Based PLLA/PCL/PHBV Scaffolds Enriched with Nano-Hydroxyapatite and Strontium Substituted Nano-Hydroxyapatite

Georgia-Ioanna Kontogianni,Amedeo Franco Bonatti,Carmelo De Maria,Raasti Naseem,Priscila Melo,Catarina Coelho,Giovanni Vozzi,Kenneth Dalgarno,Paulo Quadros,Chiara Vitale-Brovarone,Maria Chatzinikolaidou

DOI: https://doi.org/10.3390/polym15041052

IF: 5

2023-02-21

Polymers

Abstract:Bone tissue engineering has emerged as a promising strategy to overcome the limitations of current treatments for bone-related disorders, but the trade-off between mechanical properties and bioactivity remains a concern for many polymeric materials. To address this need, novel polymeric blends of poly-L-lactic acid (PLLA), polycaprolactone (PCL) and poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) have been explored. Blend filaments comprising PLLA/PCL/PHBV at a ratio of 90/5/5 wt% have been prepared using twin-screw extrusion. The PLLA/PCL/PHBV blends were enriched with nano-hydroxyapatite (nano-HA) and strontium-substituted nano-HA (Sr-nano-HA) to produce composite filaments. Three-dimensional scaffolds were printed by fused deposition modelling from PLLA/PCL/PHBV blend and composite filaments and evaluated mechanically and biologically for their capacity to support bone formation in vitro. The composite scaffolds had a mean porosity of 40%, mean pores of 800 μm, and an average compressive modulus of 32 MPa. Polymer blend and enriched scaffolds supported cell attachment and proliferation. The alkaline phosphatase activity and calcium production were significantly higher in composite scaffolds compared to the blends. These findings demonstrate that thermoplastic polyesters (PLLA and PCL) can be combined with polymers produced via a bacterial route (PHBV) to produce polymer blends with excellent biocompatibility, providing additional options for polymer blend optimization. The enrichment of the blend with nano-HA and Sr-nano-HA powders enhanced the osteogenic potential in vitro.

polymer science
Preparation and properties of poly(lactide-co-glycolide) (PLGA)/ nano-hydroxyapatite (NHA) scaffolds by thermally induced phase separation and rabbit MSCs culture on scaffolds

Y X Huang,J Ren,C Chen,T B Ren,X Y Zhou

DOI: https://doi.org/10.1177/0885328207077632

Abstract:Biodegradable polymer/bioceramic composites scaffold can overcome the limitation of conventional ceramic bone substitutes such as brittleness and difficulty in shaping. To better mimic the mineral component and the microstructure of natural bone, novel nano-hydroxyapatite (NHA)/polymer composite scaffolds with high porosity and well-controlled pore architectures as well as high exposure of the bioactive ceramics to the scaffold surface is developed for efficient bone tissue engineering. In this article, regular and highly interconnected porous poly(lactide-co-glycolide) (PLGA)/NHA scaffolds are fabricated by thermally induced phase separation technique. The effects of solvent composition, polymer concentration, coarsening temperature, and coarsening time as well as NHA content on the micro-morphology, mechanical properties of the PLGA/NHA scaffolds are investigated. The results show that pore size of the PLGA/NHA scaffolds decrease with the increase of PLGA concentration and NHA content. The introduction of NHA greatly increase the mechanical properties and water absorption ability which greatly increase with the increase of NHA content. Mesenchymal stem cells are seeded and cultured in three-dimensional (3D) PLGA/NHA scaffolds to fabricate in vitro tissue engineering bone, which is investigated by adhesion rate, cell morphology, cell numbers, and alkaline phosphatase assay. The results display that the PLGA/NHA scaffolds exhibit significantly higher cell growth, alkaline phosphatase activity than PLGA scaffolds, especially the PLGA/NHA scaffolds with 10 wt.% NHA. The results suggest that the newly developed PLGA/NHA composite scaffolds may serve as an excellent 3D substrate for cell attachment and migration in bone tissue engineering.
Three dimensional scaffolds of hybrid PLA/PCL/HA/silica nanocomposites for bone tissue engineering

Tahereh Meyhami,Shadi Hassanajili,Nader Tanideh,Elham Taheri

DOI: https://doi.org/10.1007/s00289-023-04978-0

IF: 2.843

2023-09-09

Polymer Bulletin

Abstract:Bone is the second most common connective tissue worldwide and more than four million bone grafts or substitutes are used annually to treat bone defects. Due to the restrictions of using these therapies, today the development of bioactive 3D scaffolds has become a major field in bone tissue engineering. The main aim of this study was to fabricate polylactic acid/ polycaprolactone bone scaffolds by freeze extraction method. In order to improve the rheological, mechanical and biological properties of these scaffolds, hydroxyapatite, silica and their mixture were used as the filler loaded into scaffolds (35 wt%). All scaffolds were fabricated in three different concentrations of 5, 6.5 and 8% w/w based on polymer to investigate the effect of polymer concentration on their properties. In this regard, to evaluate the surface morphology of scaffolds and the size of pores, SEM analysis and porosity test were used. FTIR analysis was performed to identify functional groups and possible molecular interactions in the scaffold. The degree of degradation of scaffolds was conducted when incubated in PBS and also to better investigate the mechanical properties, a compression test was performed on cylindrical specimens. SEM images indicated that the pores were interconnected in the composite scaffolds and their size varied from 23 to 114 μm. The amount of porosity of the scaffolds made in this project ranged from 62.2 to 84.1%. These values demonstrated that the scaffolds prepared by the freeze extraction method had suitable pore sizes for use in tissue engineering. Considering the morphology and porosity as well as the appropriate pore size distribution in the 6.5% hybrid sample, this scaffold was selected as the optimal scaffold. The results indicated that the hydrophilicity of the scaffold surface was improved by the addition of silica nanoparticles and hydroxyapatite. The use of HA alone improved the mechanical properties of the porous structure, but the addition of SiO2 to HA more effectively strengthened the scaffolds. Furthermore, in samples containing silica, an increase in degradation was observed. According to the results of MTT test, the constructed scaffolds not only did not show cytotoxicity but also increased the rate of cell growth and proliferation. Pathological images showed that ECM deposition and collagen deposition were significantly higher in the hybrid groups from the third week onwards than in the other groups.

polymer science
A Multimaterial Scaffold With Tunable Properties: Toward Bone Tissue Repair

Pei Feng,Ping Wu,Chengde Gao,Youwen Yang,Wang Guo,Wenjing Yang,Cijun Shuai

DOI: https://doi.org/10.1002/advs.201700817

IF: 15.1

2018-04-19

Advanced Science

Abstract:Polyetheretherketone (PEEK)/β-tricalcium phosphate (β-TCP) scaffolds are expected to be able to combine the excellent mechanical strength of PEEK and the good bioactivity and biodegradability of β-TCP. While PEEK acts as a closed membrane in which β-TCP is completely wrapped after the melting/solidifying processing, the PEEK membrane degrades very little, hence the scaffolds cannot display bioactivity and biodegradability. The strategy reported here is to blend a biodegradable polymer with PEEK and β-TCP to fabricate multi-material scaffolds via selective laser sintering (SLS). The biodegradable polymer first degrades and leaves caverns on the closed membrane, and then the wrapped β-TCP is exposed to body fluid. In this study, poly(l-lactide) (PLLA) is adopted as the biodegradable polymer. The results show that large numbers of caverns form on the membrane with the degradation of PLLA, enabling direct contact between β-TCP and body fluid, and allowing for their ion-exchange. As a consequence, the scaffolds display the bioactivity, biodegradability and cytocompatibility. Moreover, bone defect repair studies reveal that new bone tissues grow from the margin towards the center of the scaffolds from the histological analysis. The bone defect region is completely connected to the host bone end after 8 weeks of implantation.

materials science, multidisciplinary,nanoscience & nanotechnology,chemistry
Fabrication and properties of PLA/nano-HA composite scaffolds with balanced mechanical properties and biological functions for bone tissue engineering application

Wenzhao Wang,Boqing Zhang,Lihong Zhao,Mingxin Li,Yanlong Han,Li Wang,Zhengdong Zhang,Jun Li,Changchun Zhou,Lei Liu

DOI: https://doi.org/10.1515/ntrev-2021-0083

2021-01-01

Nanotechnology Reviews

Abstract:Abstract Repair of critical bone defects is a challenge in the orthopedic clinic. 3D printing is an advanced personalized manufacturing technology that can accurately shape internal structures and external contours. In this study, the composite scaffolds of polylactic acid (PLA) and nano-hydroxyapatite (n-HA) were manufactured by the fused deposition modeling (FDM) technique. Equal mass PLA and n-HA were uniformly mixed to simulate the organic and inorganic phases of natural bone. The suitability of the composite scaffolds was evaluated by material characterization, mechanical property, and in vitro biocompatibility, and the osteogenesis induction in vitro was further tested. Finally, the printed scaffold was implanted into the rabbit femoral defect model to evaluate the osteogenic ability in vivo . The results showed that the composite scaffold had sufficient mechanical strength, appropriate pore size, and biocompatibility. Most importantly, the osteogenic induction performance of the composite scaffold was significantly better than that of the pure PLA scaffold. In conclusion, the PLA/n-HA scaffold is a promising composite biomaterial for bone defect repair and has excellent clinical transformation potential.

materials science, multidisciplinary,physics, applied,nanoscience & nanotechnology,chemistry
Enhanced bioactivity of osteoblast-like cells on poly(lactic acid)/poly(methyl methacrylate)/nano-hydroxyapatite scaffolds for bone tissue engineering

Zhicheng Rong,Wen Zeng,Yanshen Kuang,Jianwei Zhang,Xingyun Liu,Yuan Lu,Xiangrong Cheng

DOI: https://doi.org/10.1007/s12221-015-0245-0

IF: 2.5

2015-02-01

Fibers and Polymers

Abstract:Bone tissue engineering has great potential but requires an appropriate substrate with good bioactivity. In this study, poly(lactic acid) (PLA)/poly(methyl methacrylate) (PMMA)/nano-hydroxyapatite (n-HA) hybrid nanofibrous scaffolds were fabricated via electrospinning. The morphologies of the scaffolds were observed by scanning electron microscopy, transmission electron microscopy and the structures of the scaffolds were measured by fourier transform infrared spectrum. After immersion in simulated body fluid, the more deposition of ball-like apatite can be observed on the surface of the hybrid PLA/PMMA/n-HA scaffold. In vitro degradation experiments showed that the less degradation occurred in the hybrid PLA/PMMA/n-HA scaffold. The studies of cell adhesion and growth capability were investigated by incubating the osteoblast-like cells (MG-63) in the scaffolds, which verified the addition of n-HA could promote the adhesion and proliferation of the Human osteoblast-like cells (MG-63). Hence, the electrospun hybrid PLA/PMMA/n-HA nanofibrous scaffold is a promising biomaterial, propitious to be a substrate for bone tissue engineering.

materials science, textiles,polymer science
3D-printed bioactive ceramic scaffolds with biomimetic micro/nano-HAp surfaces mediated cell fate and promoted bone augmentation of the bone-implant interface in vivo

Xiao Liu,Yali Miao,Haifeng Liang,Jingjing Diao,Lijing Hao,Zhifeng Shi,Naru Zhao,Yingjun Wang

DOI: https://doi.org/10.1016/j.bioactmat.2021.10.016

2021-10-22

Abstract:Calcium phosphate bio-ceramics are osteo-conductive, but it remains a challenge to promote the induction of bone augmentation and capillary formation. The surface micro/nano-topography of materials can be recognized by cells and then the cell fate are mediated. Traditional regulation methods of carving surface structures on bio-ceramics employ mineral reagents and organic additives, which might introduce impurity phases and affect the biological results. In a previous study, a facile and novel method was utilized with ultrapure water as the unique reagent for hydrothermal treatment, and a uniform hydroxyapatite (HAp) surface layer was constructed on composite ceramics (β-TCP/CaSiO3) in situ. Further combined with 3D printing technology, biomimetic hierarchical structure scaffolds were fabricated with interconnected porous composite ceramic scaffolds as the architecture and micro/nano-rod hybrid HAp as the surface layer. The obtained HAp surface layer favoured cell adhesion, alleviated the cytotoxicity of precursor scaffolds, and upregulated the cellular differentiation of mBMSCs and gene expression of HUVECs in vitro. In vivo studies showed that capillary formation, bone augmentation and new bone matrix formation were upregulated after the HAp surface layer was obtained, and the results confirmed that the fabricated biomimetic hierarchical structure scaffold could be an effective candidate for bone regeneration.
3D printing of HA / PCL composite tissue engineering scaffolds

Zhiwei Jiao,Bin Luo,Shengyi Xiang,Haopeng Ma,Yuan Yu,Weimin Yang

DOI: https://doi.org/10.1016/j.aiepr.2019.09.003

2019-10-01

Advanced Industrial and Engineering Polymer Research

Abstract:Here, the internal structure and mechanical properties of the hydroxyapatite/polycaprolactone scaffolds, prepared by fused deposition modeling (FDM) technique, were explored. Using hydroxyapatite (HA) and polycaprolactone (PCL) as raw materials, nano-HA/PCL and micro-HA/PCL that composite with 20 wt% HA were prepared by melt blending technology, and HA/PCL composite tissue engineering scaffolds were prepared by self-developed melt differential FDM 3D printer. From the observation under microscope, it was found that the prepared nano-HA/PCL and micro-HA/PCL tissue engineering scaffolds have uniformly distributed and interconnected nearly rectangular pores. By observing the cross-sectional view of the nano-HA/PCL scaffold and the micro-HA/PCL scaffold, it is known that the HA particles in the nano-HA/PCL scaffold are evenly distributed and the HA particles in the micro-HA/PCL scaffold are agglomerated, which attribute nano-HA/PCL scaffolds with higher tensile strength and flexural strength than the micro-HA/PCL scaffolds. The tensile strength and flexural strength of the nano-HA/PCL specimens were 23.29 MPa and 21.39 MPa, respectively, which were 26.0% and 33.1% higher than those of the pure PCL specimens. Therefore, the bioactive nano-HA/PCL composite scaffolds prepared by melt differential FDM 3D printers should have broader application prospects in bone tissue engineering.
Fabrication and biocompatibility of nano non-stoichiometric apatite and poly(epsilon-caprolactone) composite scaffold by using prototyping controlled process

Liang Ye,Xinchen Zeng,Haojiang Li,Yi Ai

DOI: https://doi.org/10.1007/s10856-009-3872-4

Abstract:Nano biocomposite scaffolds of non-stoichiometric apatite (ns-AP) and poly(epsilon-caprolactone) (PCL) were prepared by a prototyping controlled process (PCP). The results show that the composite scaffolds with 40 wt% ns-AP contained open and well interconnected pores with a size of 400-500 mum, and exhibited a maximum porosity of 76%. The ns-AP particles were not completely embedded in PCL matrix while exposed on the composite surface, which might be useful for cell attachment and growth. Proliferation of MG(63) cells was significantly better on the composite scaffolds with porosity of 76% than that those with porosity of 53%, indicating that the scaffolds with high porosity facilitated cell growth, and could promote cell proliferation. The composite scaffolds were implanted into rabbit thighbone defects to investigate the in vivo biocompatibility and osteogenesis. Radiological and histological examination confirmed that the new bony tissue had grown easily into the entire composite scaffold. The results suggest that the well-interconnected pores in the scaffolds might encourage cell proliferation, and migration to stimulate cell functions, thus enhancing bone formation in the scaffolds. This study shows that bioactive and biocompatible ns-AP/PCL composite scaffolds have potential applications in bone tissue engineering.
Binding and function of serotonin2 receptors following chronic administration of imipramine

D. McDonald,G. Stancel,S. J. Enna

DOI: https://doi.org/10.1016/0028-3908(84)90043-1

IF: 5.273

1984-11-01

Neuropharmacology

Abstract:
3D Biocompatible Polyester Blend Scaffolds Containing Degradable Calcium Citrate for Bone Tissue Engineering

Yifei Xiao,Li Wang,Kun Luo,Yanan Yang,Peicong Zhang,Junfeng Li

DOI: https://doi.org/10.1007/s42235-021-00134-4

IF: 2.995

2022-01-03

Journal of Bionic Engineering

Abstract:In this study, a novel porous 3D composite scaffold based on the biodegradable Poly(ε-caprolactone) (PCL), Polylactide Acid (PLA) and Calcium Citrate (CC) was developed via polymer blends and thermal-induced phase separation. The chemical structure, crystalline structure and micromorphology as well as mechanical strength of the scaffolds were characterized by Fourier Transform Infrared Spectroscopy (FTIR), X-ray Diffraction (XRD), Scanning Electron Microscope (SEM) and tensile tests. The results show that the obtained composite scaffold present a suitable bone-like porous structure and sufficient mechanical strength. Furthermore, the release of calcium ions in Simulated Body Fluid (SBF) indicates that the composite material can provide a stable calcium-ion environment and maintain a constant pH value during the soaking process. The cell proliferation results from CCK-8 and light microscopy show that MG63 cells exhibit excellent adhesion and proliferation on the stent. At the same time, animal implantation histology confirms that the composite scaffolds have good biocompatibility in vivo. The scaffold material has greatly potential application value in the field of bone tissue engineering.

robotics,engineering, multidisciplinary,materials science, biomaterials
A "slide rule" for angiographers.

B. Damascelli

DOI: https://doi.org/10.2214/AJR.122.1.173

1974-09-01

Abstract:
Preparation and characterization of a novel polylactic acid/hydroxyapatite composite scaffold with biomimetic micro-nanofibrous porous structure

Shuqiong Liu,Yuying Zheng,Ruilai Liu,Chao Tian

DOI: https://doi.org/10.1007/s10856-020-06415-4

2020-08-01

Abstract:Combining synthetic polymer scaffolds with inorganic bioactive factors is widely used to promote the bioactivity and bone conductivity of bone tissue. However, except for the chemical composition of scaffold, the biomimetic structure also plays an important role in its application. In this study, we report the fabrication of polylactic acid/hydroxyapatite (PLA/HA) composite nanofibrous scaffolds via phase separation method to mimic the native extracellular matrix (ECM). The SEM analysis showed that the addition of HA dramatically impacted the morphology of the PLA matrix, which changed from 3D nanofibrous network structure to a disorderly micro-nanofibrous porous structure. At the same time, HA particles could be evenly dispersed at the end of the fiber. The FTIR and XRD demonstrated that there was not any chemical interaction between PLA and HA. Thermal analyses showed that HA could decrease the crystallization of PLA, but improve the thermal decomposition temperature of the composite scaffold. Moreover, water contact angle analysis of the PLA/HA composite scaffold demonstrated that the hydrophilicity increased with the addition of HA. Furthermore, apatite-formation ability tests confirmed that HA could not only more and faster induced the deposition of weak hydroxyapatite but also induced specific morphology of HA.
Preparation and performance of poly (vinyl alcohol)/polylactic acid/hydroxyapatite composite scaffolds based on 3D printing

Biyou Peng,Jiawen Li,Jintian Wu,Ning Chen,Gang Chen

DOI: https://doi.org/10.1002/app.51534

IF: 3

2021-08-23

Journal of Applied Polymer Science

Abstract:Preparation of biological scaffolds with complex shapes and controllable internal structures is a significant development direction for the tissue engineering field. Due to its simplicity, low-cost and cost-effectiveness, fused deposition molding (FDM) is one of the most popular 3D printing technologies. In this paper, polyvinyl alcohol/polylactic acid/hydroxyapatite composites were fabricated successfully. On this basis, composite scaffolds with different pore structures were designed and constructed by using FDM technology. The material structure was characterized by scanning electron microscopy (SEM) and dynamic thermomechanical analyzer. The results showed that the cross-sectional morphology of the system presented a "sea-island" structure. The introduction of PLA and HA significantly increased the modulus of the material, which was beneficial to achieve its FDM processing. The compressibility, mineralization behavior, and biocompatibility of the viscoelastic characteristics to natural cartilage subjected to the condition of filling angle of 45° was systemically invesitgated. Notably, the concentrations of Ca2+ and PO43− in simulated body fluid were reduced by 34.7% and 58.2% on 8th day, indicating a good bone formation and mineralization ability, which was further corroborated by SEM and fourier-transform infrared spectroscopy (FTIR) results. Biotoxicity test showed that the scaffold presented excellent biocompatibility.

polymer science
Biodegradable 3D Printed Scaffolds of Modified Poly (Trimethylene Carbonate) Composite Materials with Poly (L-Lactic Acid) and Hydroxyapatite for Bone Regeneration

Honglei Kang,Xudong Jiang,Zhiwei Liu,Fan Liu,Guoping Yan,Feng Li

DOI: https://doi.org/10.3390/nano11123215

IF: 5.3

2021-11-26

Nanomaterials

Abstract:Biodegradable scaffolds based on biomedical polymeric materials have attracted wide interest in bone transplantation for clinical treatment for bone defects without a second operation. The composite materials of poly(trimethylene carbonate), poly(L-lactic acid), and hydroxyapatite (PTMC/PLA/HA and PTMC/HA) were prepared by the modification and blending of PTMC with PLA and HA, respectively. The PTMC/PLA/HA and PTMC/HA scaffolds were further prepared by additive manufacturing using the biological 3D printing method using the PTMC/PLA/HA and PTMC/HA composite materials, respectively. These scaffolds were also characterized by Fourier transform infrared spectroscopy (FT-IR), gel permeation chromatography (GPC), automatic contact-angle, scanning electronic micrographs (SEM), diffraction of X-rays (XRD), differential scanning calorimetry (DSC), and thermogravimetry (TG). Subsequently, their properties, such as mechanical, biodegradation, cell cytotoxicity, cell compatibility in vitro, and proliferation/differentiation assay in vivo, were also investigated. Experiment results indicated that PTMC/PLA/HA and PTMC/HA scaffolds possessed low toxicity, good biodegradability, and good biocompatibility and then enhanced the cell multiplication ability of osteoblast cells (MC3T3-E1). Moreover, PTMC/PLA/HA and PTMC/HA scaffolds enhanced the adhesion and proliferation of MC3T3-E1 cells and enabled the bone cell proliferation and induction of bone tissue formation. Therefore, these composite materials can be used as potential biomaterials for bone repatriation and tissue engineering.

materials science, multidisciplinary,physics, applied,nanoscience & nanotechnology,chemistry
3D Printed Multi-Functional Scaffolds Based on Poly(ε-Caprolactone) and Hydroxyapatite Composites

Fan Liu,Honglei Kang,Zhiwei Liu,Siyang Jin,Guoping Yan,Yunlong Sun,Feng Li,Haifei Zhan,Yuantong Gu

DOI: https://doi.org/10.3390/nano11092456

IF: 5.3

2021-09-21

Nanomaterials

Abstract:3D Printed biodegradable polymeric scaffolds are critical to repair a bone defect, which can provide the individual porous and network microenvironments for cell attachment and bone tissue regeneration. Biodegradable PCL/HA composites were prepared with the blending of poly(ε-caprolactone) (PCL) and hydroxyapatite nanoparticles (HA). Subsequently, the PCL/HA scaffolds were produced by the melting deposition-forming method using PCL/HA composites as the raw materials in this work. Through a serial of in vitro assessments, it was found that the PCL/HA composites possessed good biodegradability, low cell cytotoxicity, and good biocompatibility, which can improve the cell proliferation of osteoblast cells MC3T3-E1. Meanwhile, in vivo experiments were carried out for the rats with skull defects and rabbits with bone defects. It was observed that the PCL/HA scaffolds allowed the adhesion and penetration of bone cells, which enabled the growth of bone cells and bone tissue regeneration. With a composite design to load an anticancer drug (doxorubicin, DOX) and achieve sustained drug release performance, the multifunctional 3D printed PCL/HA/DOX scaffolds can enhance bone repair and be expected to inhibit probably the tumor cells after malignant bone tumor resection. Therefore, this work signifies that PCL/HA composites can be used as the potential biodegradable scaffolds for bone repairing.

materials science, multidisciplinary,physics, applied,nanoscience & nanotechnology,chemistry
Bioactive bone scaffolds manufactured by 3D printing and sacrificial templating of poly(ε-caprolactone) composites as filler for bone tissue engineering

Liu, Ping,Yang, Xinghai

DOI: https://doi.org/10.1007/s10853-023-08319-4

IF: 4.5

2023-03-11

Journal of Materials Science

Abstract:The structures of a bone scaffold play a role in cell attachment and proliferation. In the present work, a poly(ε-caprolactone)/hydroxyapatite/simvastatin (PCL/HA/SIM) composite with a three-dimensional (3D) hierarchical porous structure was successfully fabricated by 3D printing a polyvinyl alcohol (PVA) sacrificial template and a subsequent polymer coating step. The SEM images show that an increase in HA content in the composite significantly decreases the diameter of micropores on the composite surface. The compressive strength measurement results of the composite scaffold show that the strength of the composite scaffold is significantly superior to that of the pure PCL scaffold. Nevertheless, the enhancement of strength in the composite scaffold is not monotonous with more content of HA in the composite as the maximum strength happens for 27.3 wt% of HA. Mouse embryonic fibroblasts (3T3) cells were in vitro cultivated in pure PCL and the composites and demonstrated that more HA content facilitates the proliferation of such cells. Furthermore, an addition of 0.2 wt% of simvastatin (SIM) to the PCL/HA composite scaffold to prepare significantly promoted the proliferation and osteogenic gene expression. The present work shows a potential novel strategy to construct bone tissue engineering scaffolds and cure bone defects.

materials science, multidisciplinary
3D Printing of Porous Degradable Scaffolds with Polylactic Acid‐Loaded Bioactive Glass and Calcium Sulfate Hemihydrate for Bone Defect Repair

Huiqiang Hu,Zheng Zhao,Yanni Sun,Jiawei Zhao,Zhengqian Chen,Jianyi Li,Weiqing Kong,Yukun Du,Jiale Shao,Xiaoyang Zhu,Hongbo Lan,Yongming Xi

DOI: https://doi.org/10.1002/admt.202300061

IF: 6.8

2023-05-17

Advanced Materials Technologies

Abstract:A simple and cost‐effective one‐step fabrication method of porous composite biodegradable bone tissue engineering scaffolds is demonstrated via 3D printing. The scaffold has good biocompatibility and mechanical properties, and has achieved good effect on bone defect repair and angiogenesis. Repair of bone defects, especially critical‐sized bone defects, remains a major clinical problem, and bone nonunion is the biggest challenge. Herein, melt‐extrusion 3D printing is applied to prepare biodegradable composite scaffolds containing bioactive glass (BAG), calcium sulfate hemihydrate (CSH), and polylactic acid (PLA). The compressive strength of scaffolds is similar to that of human bone tissue. In vitro and in vivo experiments show that the scaffolds have good biocompatibility. The scaffold can maintain the biomechanical stability of the bone defect area during the follow‐up period of 20 weeks and has no damage to liver and kidney in animal experiments. Scaffold degradation is accompanied by trabecular bone and vessel neogenesis. While the PLA group and control group cannot carry out effective bone defect repair, the bone defect repair effect of the PLA‐CSH‐BAG group is satisfactory. In conclusion, the biodegradable porous scaffold has been proposed as a safe and effective approach for the repair of bone defects.

materials science, multidisciplinary
Selective laser sintered bio-inspired silicon-wollastonite scaffolds for bone tissue engineering

Nikhil Kamboj,Jekaterina Kazantseva,Ramin Rahmani,Miguel A Rodríguez,Irina Hussainova

DOI: https://doi.org/10.1016/j.msec.2020.111223

Abstract:The scaffolds, which morphologically and physiologically mimic natural features of the bone, are of high demand for regenerative medicine. To address this challenge, we have developed innovative bioactive porous silicon- wollastonite substrates for bone tissue engineering. Additive manufacturing through selective laser melting approach has been exploited to fabricate scaffolds of different architecture. Unique material combining osteoinductivity, osteoconductivity and bioactive elements allows flexibility in design. As the porous structure is required for the ingrowth of the bone tissue, the CAD designed scaffolds with pore size of 400 μm and hierarchical gradient of pore size from 50 μm to 350 μm have been 3D printed and tested in vitro. The scaffolds have demonstrated not only the enhanced viability and differential patterning of human mesenchymal cells (hMSC) guided by the biomimetic design onto extra and intra scaffold space but also promoted the osteogenic differentiation in vitro. Both homogeneous and gradient scaffolds have shown the differential expression of primary transcription factors (RUNX2, OSX), anti-inflammatory factors and cytokines, which are important for the regulation of ossification. The effective elastic modulus and compressive strength of scaffolds have been calculated as 1.1 ± 0.9 GPa and 37 ± 13.5 MPa with progressive failure for homogeneous structured scaffold; and 1.8 ± 0.9 GPa and 71 ± 9.5 MPa for gradient-structured scaffold with saw-tooth fracture mode and sudden incognito failure zones. The finite element analysis reveals more bulk stress onto the gradient scaffolds when compared to the homogeneous counterpart. The findings demonstrate that as-produced composite ceramic scaffolds can pave the way for treating specific orthopaedic defects by tailoring the design through additive manufacturing.

Ecological and individual effects in childhood immunisation uptake: a multi-level approach.

Comparison of biophysical stimuli for mechano-regulation of tissue differentiation during fracture healing.

Promotion of In Vitro Osteogenic Activity by Melt Extrusion-Based PLLA/PCL/PHBV Scaffolds Enriched with Nano-Hydroxyapatite and Strontium Substituted Nano-Hydroxyapatite

Preparation and properties of poly(lactide-co-glycolide) (PLGA)/ nano-hydroxyapatite (NHA) scaffolds by thermally induced phase separation and rabbit MSCs culture on scaffolds

Three dimensional scaffolds of hybrid PLA/PCL/HA/silica nanocomposites for bone tissue engineering

A Multimaterial Scaffold With Tunable Properties: Toward Bone Tissue Repair

Fabrication and properties of PLA/nano-HA composite scaffolds with balanced mechanical properties and biological functions for bone tissue engineering application

Enhanced bioactivity of osteoblast-like cells on poly(lactic acid)/poly(methyl methacrylate)/nano-hydroxyapatite scaffolds for bone tissue engineering

3D-printed bioactive ceramic scaffolds with biomimetic micro/nano-HAp surfaces mediated cell fate and promoted bone augmentation of the bone-implant interface in vivo

3D printing of HA / PCL composite tissue engineering scaffolds

Fabrication and biocompatibility of nano non-stoichiometric apatite and poly(epsilon-caprolactone) composite scaffold by using prototyping controlled process

Binding and function of serotonin2 receptors following chronic administration of imipramine

3D Biocompatible Polyester Blend Scaffolds Containing Degradable Calcium Citrate for Bone Tissue Engineering

A "slide rule" for angiographers.

Preparation and characterization of a novel polylactic acid/hydroxyapatite composite scaffold with biomimetic micro-nanofibrous porous structure

Preparation and performance of poly (vinyl alcohol)/polylactic acid/hydroxyapatite composite scaffolds based on 3D printing

Biodegradable 3D Printed Scaffolds of Modified Poly (Trimethylene Carbonate) Composite Materials with Poly (L-Lactic Acid) and Hydroxyapatite for Bone Regeneration

3D Printed Multi-Functional Scaffolds Based on Poly(ε-Caprolactone) and Hydroxyapatite Composites

Bioactive bone scaffolds manufactured by 3D printing and sacrificial templating of poly(ε-caprolactone) composites as filler for bone tissue engineering

3D Printing of Porous Degradable Scaffolds with Polylactic Acid‐Loaded Bioactive Glass and Calcium Sulfate Hemihydrate for Bone Defect Repair

Selective laser sintered bio-inspired silicon-wollastonite scaffolds for bone tissue engineering