Abstract:This paper presents a forward kinematic model of a wire-driven surgical robot arm with an articulated joint structure and path generation algorithms with solutions of inverse kinematics. The proposed methods were applied to a wire-driven surgical robot for single-port surgery. This robot has a snake-like robotic arm with double segments to fit the working space in a single port and a joint structure to secure stiffness. The accuracy of the model is highly important because small surgical robot arms are usually controlled by open-loop control. A curvature model is widely used to describe and control a continuum robotic body. However, the model is quite different from a continuum robotic arm with a joint structure and can lead to slack of the driving wires or decreased stiffness of the joints. An accurate forward kinematic model was derived to fit the actual hardware structure via the frame transformation method. An inverse kinematic model from the joint space to the wire-length space was determined from an asymmetric model for the joint structure as opposed to a symmetric curvature model. The path generation algorithm has to generate a command to send to each actuator in open-loop control. Two real-time path generation algorithms that solve for inverse kinematics from the task space to the joint space were designed and compared using simulations and experiments. One of the algorithms is an optimization method with sequential quadratic programming (SQP), and the other uses differential kinematics with a PID (Proportional-Integral-Derivative) control algorithm. The strengths and weaknesses of each algorithm are discussed.

Kinematics Modeling and Simulating of a New Surgical Robot

Kinematic Analysis of A New Hybrid Surgical Robot

Configuration and Kinematic Analysis of a Novel Hybrid Surgical Robot with a Ball Joint

Mechanical design and kinematic analysis of a medical robot assisted maxillofacial surgery

Kinematic analysis of a parallel robot for minimally invasive surgery

Kinematics analysis and trajectory planning of a multiarm medical robot assisted maxillofacial surgery

Design and Kinematic Analysis of a Robotics Maxillofacial Surgery System

Design and Kinematic Calibration of a New 4-DOF Spinal Surgery Robot

Closed-Form Solution of Inverse Kinematics for a Minimally Invasive Surgical Robot Slave Manipulator Similar to Da Vinci Robot System

Design and Kinematics Analysis of Parallel Robotic Arm for Urological Surgery

Kinematics Modeling and Simulation of a Flexible Surgical Robotic Instrument with a Multi-joint Wrist

A New Kinematics Method Based on a Dynamic Visual Window for a Surgical Robot.

Kinematic Design of a 2DoFs Remote Center of Motion Mechanism for Minimally Invasive Surgical Robot

Kinematic Model and Real-Time Path Generator for a Wire-Driven Surgical Robot Arm with Articulated Joint Structure

Kinematics Analysis and Control of a Novel Macro-Micro Integrated Hybrid Robot for Medical Surgery.

Design and Analysis of a New Remote Center-of-Motion Parallel Robot for Minimally Invasive Surgery.

Inverse Kinematics Analysis and Simulation of a 5 DOF Robotic Arm using MATLAB

Laparoscopic Robot Design and Kinematic Validation

Kinematic Modelling and Simulation of Six-DOF Collaborative Robot

Design and Kinematic Analysis of a Parallel Robot with Remote Center of Motion for Minimally Invasive Surgery

The kinematics modeling based on Spinor theory for CT-guided hybrid robot