Abstract:Prostaglandins, leukotrienes, and other metabolites of arachidonic acid can be conveniently and efficiently extracted from biological media using a precolumn containing octadecylsilyl silica connected to a 6-port switching valve that is in line with an analytical HPLC column. This procedure makes it possible to extract complex mixtures of eicosanoids and to analyze them by reversed-phase HPLC in a single step. The requirement to evaporate solvents from extracts prior to HPLC is therefore eliminated, saving time and reducing the possibilities for loss and contamination. The effects on recoveries of various media for loading the sample onto the precolumn were investigated, and it was concluded that 15% methanol at neutral pH gives the best overall results. It is therefore not necessary to acidity the sample prior to extraction, which simplifies the procedure and improves the recoveries of acid-labile eicosanoids. Following extraction, eicosanoids can be introduced onto the HPLC column by changing the position of the 6-port switching valve. We have investigated several approaches to the analysis of complex mixtures of these products by reversed-phase HPLC. The best results were obtained using a ternary gradient with a non-end-capped column of octadecylsilyl silica. Metabolites of arachidonic acid other than peptido-leukotrienes were first eluted by increasing the concentrations of acetonitrile and methanol in the mobile phase, which contained a constant concentration of trifluoroacetic acid (0.001%). Peptido-leukotrienes were then eluted with a second gradient, in which the concentrations of acetonitrile and methanol were kept constant, but the concentration of trifluoroacetic acid was increased to 0.0091%. Leukotrienes C4, D4, and E4 appear as sharp peaks at the end of the chromatogram and are completely separated from other types of arachidonic acid metabolites.

Laparoscopic Robot Design and Kinematic Validation

Linkage Couples Based Endoscope-holder Robot with Enhanced Bending Curvature for Laparoscopic Surgery

Configuration and Kinematic Analysis of a Novel Hybrid Surgical Robot with a Ball Joint

Kinematic Analysis of A New Hybrid Surgical Robot

Design and validation a minimally invasive robotic surgical instrument with decoupled pose and multi-DOF

Precolumn Extraction and Reversed-Phase High-Pressure Liquid Chromatography of Prostaglandins and Leukotrienes.

Development of a 6-DOF Parallel Robot for Potential Single-Incision Laparoscopic Surgery Application

Modeling and design optimization of master manipulator for robot-assisted minimally invasive surgery

Control system design for a novel minimally invasive surgical robot

Design, Analysis and Experimental Validation of a Novel 7-Degrees of Freedom Instrument for Laparoscopic Surgeries

Design and Analysis of a Wire-Driven Multifunctional Robot for Single Incision Laparoscopic Surgery

Robot base placement and tool mounting optimization based on capability map for robot-assistant camera holder

Design and experimental validation of a master manipulator with position and posture decoupling for laparoscopic surgical robot

Compact forceps manipulator using friction wheel mechanism and gimbals mechanism for laparoscopic surgery

Design of a Novel Surgical Robot with Rigidity-Adjustable Joints Based on Time-Division Multiplexing Actuation.

Kinematic Optimization of a Continuum Surgical Manipulator

Kinematics Modeling and Simulation of a Flexible Surgical Robotic Instrument with a Multi-joint Wrist

Surgical robot for single-incision laparoscopic surgery

Mechanism Design of the Minimally Invasive Vascular Interventional Surgery Robot System.

Modeling, Analysis and Evaluation of a Novel Compact 6-DoF 3-RRRS Needle Biopsy Robot

Manipulability Optimization Control of a Serial Redundant Robot for Robot-assisted Minimally Invasive Surgery