Abstract:Purpose: Compliant mechanisms are commonly used in the design of manipulator and surgical robotic tools for minimally invasive surgery (MIS) thanks to their compactness, ability of miniaturization and lower part count. However, conventional compliant joint has higher internal stiffness, which limits the bending radius. To overcome this problem, a novel tendon-driven manipulator structure based on monolithic compliant rolling-contact joint (CRCJ) is proposed. Methods: The proposed rolling-contact mechanism is used to prevent cable slack during actuation, which occurs in conventional compliant joint design. By means of selective laser sintering (SLS) technique, the CRCJ can be fabricated in a monolithic structure, thus granting the CRCJ both the advantages of compliant joints and rolling-contact mechanism. Simulations with nonlinear finite element analysis (FEA) and experiments were conducted to evaluate and compare the mechanical properties of the proposed CRCJ with conventional leaf-type compliant joint including the bending and compliant motion. Results: Experimental results showed that the CRCJ has lower bending stiffness, higher maximum bending angle (over [Formula: see text]) and a higher compliance compared to conventional compliant hinges, which allows a larger workspace and reduces the possibility of tissue injury. Agreement was also found between the nonlinear FEA and experiments regarding the relation between actuation force and bending angle. A primary prototype of a 3-DOF handheld laparoscopic manipulator with a diameter of 7 mm was further developed. Conclusion: A dexterous tendon-driven monolithic manipulator structure based on CRCJ for MIS is proposed. A preliminary prototype of a handheld laparoscopic manipulator demonstrates the capability of the CRCJ for steerable medical devices. However, design improvements based on FEA and application-orientated prototypes considering anatomical requirements still show room for improvements.

Design of a Novel Surgical Robot with Rigidity-Adjustable Joints Based on Time-Division Multiplexing Actuation.

Design of a novel tendon-driven manipulator structure based on monolithic compliant rolling-contact joint for minimally invasive surgery

Bioinspired handheld time-share driven robot with expandable DoFs

A Novel Flexure-Based 3-DOF Micro-Parallel Manipulator with a Gripper for Micro/nano Manipulation

Design of a High-torque Robot Joint and Its Control System

Safe & Accurate at Speed with Tendons: A Robot Arm for Exploring Dynamic Motion

Advanced Artificial Muscle for Flexible Material-Based Reconfigurable Soft Robots.

A Novel Tele-Operated Flexible Robot Targeted for Minimally Invasive Robotic Surgery

Design and analysis of a tendon-based MRI-compatible surgery robot for transperineal prostate needle placement

Design and development of a 3-DoF robotic wrist joint with tension amplification mechanism

Selectively Tunable Joints With Variable Stiffness for a Magnetically-Steerable 6-DOF Manipulator

Design and Validation of A Novel Planar 2R1T Remote Center-of-motion Mechanism Composing of Dual-Triangular and Straight-Line Linkages

Separable Tendon-Driven Robotic Manipulator with a Long, Flexible, Passive Proximal Section

Design and Control of a Novel Six-Degree-of-Freedom Hybrid Robotic Arm

Design and validation a minimally invasive robotic surgical instrument with decoupled pose and multi-DOF

Design of a new haptic device and experiments in minimally invasive surgical robot

Kinematics Modeling and Simulation of a Flexible Surgical Robotic Instrument with a Multi-joint Wrist

Mechanical design and analysis of a novel variable stiffness actuator with symmetrical pivot adjustment

Mechanism for tension adjustment in tendon driven remote center-of-motion mechanism for minimally invasive surgery

Design and analytical modeling of a double-joint flexible surgical instrument with hand-held isomorphic actuation

Design, analysis and control of a novel tendon-driven magnetic resonance–guided robotic system for minimally invasive breast surgery