Abstract:Atomization spray of non-Newtonian liquid plays a pivotal role in various engineering applications, especially for the energy utilization. To operate spray systems efficiently and well understand the effects of liquid rheological properties on the whole spray process, a comprehensive model using Euler-Lagrangian approaches was established to simulate the evolution of the atomization spray for viscoelastic liquid. Based on the Oldroyd model, the viscoelastic linear dispersion relation was introduced into the primary atomization; an extended viscoelastic version of Taylor analogy breakup (TAB) model was proposed; and the coalescence criteria was modified by rheological parameters, such as the relaxation time, the retardation time and the zero shear viscosity. The predicted results are validated with experimental data varying air-liquid mass flow ratio (ALR). Then, numerical calculations are conducted to investigate the characteristics of viscoelastic liquid atomization process. Results showed that the evolutionary trend of droplet mean diameter, Weber number and Ohnesorge number of viscoelastic liquids along with axial direction were qualitatively similar to that of Newtonian liquid. However, the mean size of polymer solution increased more gently than that of water at the downstream of the spray, which was beneficial to stable control of the desirable size in the applications. As concerned the effects of liquid physical properties, the surface tension played an important role in the primary atomization, which indicated the benefit of selecting the solvents with lower surface tension for finer atomization effects, while, for the evolution of atomization spray, larger relaxation time and zero shear viscosity increased droplet Sauter mean diameter (SMD) significantly. The zero shear viscosity was effective throughout the jet region, while the effect of relaxation time became weaken at the downstream of the spray field.

Application of droplet motion and phase change model in containment spray system

Droplet Motion and Phase Change Model with Two-Way Coupling

A Volatile Spray Zone Model and Experimentation in a Gas-Solid Fluidized Bed with Liquid Injection

Application of droplet motion and evaporation model in fuel spray in the constant volume bomb

Hydrodynamics and Heat Transfer in a Fluidized Bed with Liquid Spray: Particle Color-Change Based Measurement and Modelling

Three-Dimensional Simulation Of Effervescent Atomization Spray

Simulation of Droplet-gas Flow in the Effervescent Atomization Spray with an Impinging Plate

Effects of operating conditions on droplet deposition onto surface of atomization impinging spray

Relationship between deposition properties and operating parameters for droplet onto surface in the atomization impinging spray

Three-Dimensional Simulation on Drift-reduction of Air-assist Spraying

Single Droplet Phase Transformation Model During Motion

Droplet Phase Change Model and Its Application in Wave-Type Vanes of Steam Generator

Thin liquid film flow and heat transfer under spray impingement

Numerical Models For Viscoelastic Liquid Atomization Spray

Three-dimensional Droplet Motion Model

Mathematical modeling of multi-component aerosol droplet evaporation and growth in indoor environments

DROPLET PHASE CHANGE CHARACTERISTICS DURING MOVING IN THE UNIFORM FLOW IN THE GRAVITY SEPARATION SPACE

Computational fluid dynamics simulations of spray tests in a multicompartment construction with an Eulerian–Lagrangian approach

Spray performance simulation and experiment analysis of a greenhouse fixed-pipe twin-fluid cold fogger with different nozzle settings

Energy stable methods for phase-field simulation of droplet impact with surfactants

Droplet dynamics of DI spray from sub-atmospheric to elevated ambient pressure