Abstract:The modeling and simulation of the heating and evaporation of a spherically symmetric single, bi-component ethanol/water droplet in convective air is studied which allows for an improved understanding of the different heating and evaporation characteristics of the two components of the bi-component droplet. The concentration inside the droplet interior is considered to be uniform and the temperature is modeled with the distillation-limit model. The Abramzon–Sirignano model is used for describing the convective droplet heating and evaporation, and Brenn's extension for multicomponent droplets is used for modeling the ethanol/water droplet. The UNIFAC method is employed to describe the activity coefficients to account for the non-ideal behavior of the ethanol/water mixture. The numerical results corresponding to non-ideal and ideal mixing are compared with experimental data from the literature. Moreover, a parameter study of the ethanol/water droplet evaporation in both dry and humid air for combustion conditions is performed where both the initial gas temperature and velocity and the initial droplet size and composition are varied. The evolution of the droplet surface area, the mass fractions, the mass evaporation rate, and the surface temperature are analyzed for the different conditions. In general, the UNIFAC method initially leads to a somewhat faster evaporation rate and slows down after the higher volatile component has almost completely evaporated; however, its effect on the droplet lifetime is small. Humidity strongly affects the bi-component droplet heating and evaporation because of the condensation of water on the droplet surface which retards the water evaporation but enhances the initial ethanol evaporation for high relative humidity. Also, in humid conditions, the droplet lifetime is strongly increased compared to evaporation in dry air. The parametric dependencies of droplet lifetime and the evaporation characteristics of the bi-component ethanol/water droplet evaporation in both dry and humid convective air may be used in more complex simulations of non-reacting and reacting spray flows.

Mathematical modeling of multi-component aerosol droplet evaporation and growth in indoor environments

Modelling of evaporation of cough droplets in inhomogeneous humidity fields using the multi-component Eulerian-Lagrangian approach

Modeling of Ultrafine Particle Dispersion in Indoor Environments with an Improved Drift Flux Model

Evaporation flow characteristics of respiratory droplets: Dynamic property under multifarious ambient conditions

A distributed computational model for estimating room air level of constituents due to aerosol emission from e-vapor product use

Experiment and numerical investigation of inhalable particles and indoor environment with ventilation system

Mathematical Model Research Of Mass Transfer Across Water-Air Interface For Volatile Poisons

A Chemical Dynamic Model for the Infiltration of Outdoor Size-Resolved Ammonium Nitrate Aerosols to Indoor Environments.

Steady-state model for predicting size-resolved gas-particle partitioning of semi-volatile organic compounds (SVOCs) in indoor environments

Computational transport, phase change and deposition analysis of inhaled multicomponent droplet–vapor mixtures in an idealized human upper lung model

Droplet Motion and Phase Change Model with Two-Way Coupling

Numerical Study of the Effect of Ventilation Pattern on Coarse, Fine, and Very Fine Particulate Matter Removal in Partitioned Indoor Environment

A Model for Mass and Heat Transfer in an Aerosol Cloud

How Far Droplets Can Move In Indoor Environments - Revisiting The Wells Evaporation-Falling Curve

A Kinetic Partitioning Method for Simulating the Condensation Mass Flux of Organic Vapors in a Wide Volatility Range

Three-dimensional non-isothermal numerical model for predicting semi-volatile organic compound transport process in a room

CFD modeling of the transport of human respiratory droplets in an indoor environment

Numerical Modeling of Droplet Aerosol Coagulation, Condensation/Evaporation and Deposition Processes

A new robust modeling strategy for multi-component droplet heat and mass transfer in general ambient conditions

Aerosol dynamics modeling of sub-500 nm particles during the HOMEChem study

Modeling and Simulation of Single Ethanol/Water Droplet Evaporation in Dry and Humid Air