Abstract:This paper studies the simplified impedance criterion of the three-phase converter system in different coordinate systems. In addition, the influence of small signal stability of converter units under the weak grid is discussed in three-phase converter systems. Firstly, a small signal model of a three-phase grid-connected converter system is established based on the voltage and current double closed-loop control strategy in dq real coordinate system and the dynamic characteristics of SRF-PLL (Synchronous Reference Frame Phase-Locked Loop). Then, based on the coordinate transformation, the admittance models in the dq real coordinate system and the fb complex coordinate system are derived. Through the analysis of the admittance Bode diagram, the amplitude-frequency characteristics of the three-phase converter system have conjugate symmetry in the real coordinate system and diagonal conjugate symmetry in the complex coordinate system. Therefore, the three-phase symmetrical system can be stabilized only by drawing the Nyquist curve of the open-loop transfer function GH f or GHb . The three-phase asymmetric system can also be stabilized by drawing the Nyquist curve of the modified open-loop transfer function GH fM or GH bM . Finally, the simulation results show that the converter system loses stability when the transmission line impedance L g = 0.6 pu. In this case, the three current decoupling terms will cause the system to lose stability, but the relative stability of the current reference value is the best, and the phase angle margin is −6.8°. Also, without considering the phase-locked loop dynamics, the system is in a steady state, otherwise, the system loses stability, and the system output current has a 39 Hz oscillation, which is consistent with the theoretical analysis results.

D-Q Frame Impedance Measurement and Small Signal Stability Improvement in a 3-ϕ System with Constant Power Loads by an Active Control Method

Real-time Grid Impedance Measurement of Three-Phase Micro-grid System in D-Q Frame Using Quadratic Residue Ternary Sequence (QRTS)

Impedance-based Analysis of Constant Reactive Power Control for Voltage Source Converter in Weak AC Grids

Stability Analysis and Improvement of Three-Phase Grid-Connected Power Converters with Virtual Inertia Control

Small Signal Stability Analysis of Microgrid System Based on Real-time Grid Impedance Measurement Using Quadratic Residue Binary Sequence (QRBS)

Small Signal Stability Analysis of Three-Phase Inverter with Contral Strategy under Hybrid Reference Frame Based on Dq-Frame Impedance

A New Control Approach for Active Power Quality Conditioner in Synchronous Rotating Frame

Impedance Modeling and Stability Analysis of DFIG System Based on Direct Power Control Without PLL

Stability Analysis of DPC in the FSRF for Grid-Connected Converter

Impedance-Based Analysis and Stability Improvement of DFIG System Within PLL Bandwidth

Stability Analysis of DFIG System connected with High-Frequency Capacitive Grid based on Closed-Loop Current Control and Direct Power Control

Impedance Modeling and Analysis of Three-Phase Voltage-Source Converters Viewing from DC Side

Impedance Analysis of DFIG System Based on DPC Without PLL at Fundamental Frequency

Stability Analysis and Improvement of V/Hz Controlled Adjustable Speed Drives Equipped with Small DC-Link Thin Film Capacitors

Harmonics Performance and System Stability Evaluation Between 18-Pulse and LCL Filter Based Active Front End Converters under Weak Grid Condition

A simple method for shifting local dq impedance models to a global reference frame for stability analysis

Enhancing Stability and Performance of DC Microgrid: A Coordinated Impedance Reshaping Controller Design Approach

Stability Enhancement Based on Virtual Impedance for DC Microgrids with Constant Power Loads

Passivity-Based Control of Dual Active Bridge Converter in Constant Power Load Condition

Design and analysis of a Three Phase Transformerless Hybrid Series Active Power Filter based on sliding mode control using PQ-theory and stationary reference frames

Accurate Stability Analysis of Three-Phase Converter System Connected to Weak Grid under Coordinate System Transformation