Abstract:Ceramic-reinforced aluminum-based composites are ideal materials for lightweight structural parts. However, as the content of the ceramic reinforcement phase increases, the toughness of the composites will decrease, resulting in a decrease in the safety of the composites during service. Therefore, how to achieve the matching of high strength and toughness of composite materials is a problem that has always existed in the preparation of ceramic reinforced aluminum matrix composites. According to the idea of bionics, the nacre-inspired TiB2/Al-Cu composites with different ceramic initial solid content (20vol.%, 30vol.%, 40vol.%) were successfully prepared by freezing casting and pressure infiltration. The microstructures and mechanical properties of nacre-inspired TiB2/Al-Cu composites were studied by optical microscopy (OM), scanning electron microscopy (SEM), X-ray diffraction (XRD) and mechanical testing. The experimental results show that with the increase of the initial solid content of the ceramic, the thickness of the ceramic sheet in the composite material increases, while the thickness of the metal sheet layer decreases. The compressive strength of the composite material is improved, but the bending strength and fracture toughness decrease. The nacre-inspired TiB2/Al-Cu composites with 20vol.% ceramic initial solid content has the better fracture toughness, reaching 20.59±1.5 MPa·m1/2; The nacre-inspired TiB2/Al-Cu composites with 40vol.% ceramic initial solid content has the better compressive strength, reaching 670±20 MPa. This is mainly because as the initial solid content of the ceramic in the composite material increases, the nacre-inspired composite material are more prone to interface delamination, the toughening effect of the layered composite material through alloy plastic deformation is weakened; at the same time, the toughening effect of crack deflection, interface peeling, and crack branching is reduced.

Microstructures and Mechanical Characterizations of High-Performance Nacre-Inspired Al/Al2O3 Composites

Fabrication and Characterisation of Alumina/aluminium Composite Materials with a Nacre-Like Micro-Layered Architecture

Cost-effective Fabrication of Bio-Inspired Nacre-Like Composite Materials with High Strength and Toughness

Conch‐Shell‐Inspired Tough Ceramic

Bioinspired Hydroxyapatite/Poly(methyl Methacrylate) Composite with a Nacre‐Mimetic Architecture by a Bidirectional Freezing Method

Development of a Nacre-Like Metal-Ceramic Composite with a Brick-and-mortar Structure and High Ceramic Content

Fabrication and Characterization of Nacre-Inspired Metal/ceramic Composites Containing AlN Nanowhiskers

Microstructure and Mechanical Properties of Nacre-Inspired TiB2/Al-Cu Composites

Fabrication and Characterization of Nacre-Inspired Alumina-Epoxy Composites

Microstructures and Mechanical Properties of High-Performance Nacre-Inspired Al-Si/TiB2 Composites Prepared by Freeze Casting and Pressure Infiltration

A Novel Approach to the Fabrication of Lamellar Al2O3/6061Al Composites with High-Volume Fractions of Hard Phases

Nacre-like Hybrid Aluminum-Matrix Composite with Simultaneously Enhanced Strength and Toughness

Effects of Ceramic Lamellae Compactness and Interfacial Reaction on the Mechanical Properties of Nacre-Inspired Al/Al2O3–ZrO2 Composites

Bioinspired nacre-like 2024Al/B4C composites with high damage tolerance

A Strong, Tough, and Stable Composite with Nacre-Inspired Sandwich Structure

Fabrication and mechanical properties of nacre-like alumina with addition of silicon nitride

Optimization of the microstructure, mechanical properties, and wear resistance of nacre-inspired TiB2/Al-Cu composites via gelatin addition

Bioinspired Nacre-Like Alumina with a Metallic Nickel Compliant Phase Fabricated by Spark-Plasma Sintering

Nacre-inspired Ti (C, N)/Al–Cu Composites with High Damage Tolerance and Wear Resistance Prepared by Freeze and Squeeze Casting

Nacre-like carbon fiber-reinforced biomimetic ceramic composites: Fabrication, microstructure, and mechanical performance

Construction of nacre-mimetic composites with a “brick-and-mortar” architecture based on structural defects in ice-templating