Abstract:Although manufactured sand is becoming increasingly popular to prepare the cleaner and sustainable construction production in face of the depletion of natural river sand, it needs to be further promoted in some advanced concretes like ultra-high performance concrete (UHPC). Different lithological manufactured sands with the same particle gradation were used as fine aggregates to prepare UHPC in this study. Meanwhile, the UHPC mixtures prepared with washed or unwashed sands were also compared. The following aspects were evaluated: flowability, rheology, setting time, mechanical strength, volume stability, thermogravimetric behavior, pore distribution, microstructure characteristics, environmental and economical benefits. Results indicated that sand washing process greatly lowered the apparent viscosity and yield stress, and improved the flowability of UHPC. Increments of 16.7 %, 19.6 % and 15.7 % in flowability were observed for washed granite, tuff and limestone sand UHPC. Pre-washing process significantly delayed the setting times. Tuff sand UHPC demonstrated the optimal mechanical properties (compressive, flexural and tensile strengths), with a compressive strength exceeding 150 MPa at 28 days. In most cases, sand washing process had a slightly beneficial effect on mechanical strengths. The use of washed sand reduced the autogenous shrinkage of UHPC by 5.1%-10.6 %. Tuff sand UHPC possessed the largest cumulative pore volume, while limestone one had the fewest macropores (>100 nm). The cumulative pore volume and total porosity decreased with the addition of washed sands. Compared with traditional UHPC, the utilization of manufactured sand with different lithology and pre-washing process in UHPC could not only illustrate good workability and mechanical strengths, it also demonstrated lower carbon emissions and production costs. The prepared eco-friendly UHPC in this study effectively utilized the solid waste and lessened the environmental burden, which proposed an emerging approach for the application of manufactured sands in green advanced concretes in future work.

The Physical and Chemical Impact of Manufactured Sand As a Partial Replacement Material in Ultra-High Performance Concrete (UHPC)

Feasibility Study on Preparing Economical and Environmentally-Friendly High-Flowability Ultra-High Performance Cementitious Composites with Original Graded Stone Powder Free Recycled Manufactured Sands

Utilization of Solid Waste from Tunnel Excavation As Manufactured Sand with Different Lithology and Pre-Washing Process for Preparation of Eco-Friendly Ultra-High Performance Concretes: Properties and Microstructural Analysis

Recycling Stone Powder As a Partial Substitute for Cementitious Materials into Eco-Friendly Manufactured Sand Ultra-High Performance Concretes: Towards Cleaner and More Cost-Effective Construction Production

3D Characteristic Indicator Analysis and Comprehensive Evaluation of Manufactured Sand Particles Used in High-Performance Concrete

Effect of Composition Characteristics on Mechanical Properties of UHPMC Based on Response Surface Methodology and Acoustic Emission Monitoring

Fracture Characteristics and Damage Evolution of Manufactured Sand-Based Ultra-High Performance Concrete Using Tensile Testing and Acoustic Emission Monitoring

Investigation on physical and mechanical properties of manufactured sand concrete

Mechanical Properties and Environmental Evaluation of Ultra-High-Performance Concrete with Aeolian Sand

Workability, Hydration, Microstructure, and Mechanical Properties of UHPC Produced with Aeolian Sand

Quasi-static and Dynamic Mechanical Properties of Eco-Friendly Ultra-High-performance Concrete Containing Aeolian Sand

Mechanical Properties of Ultra-High Performance Concrete (UHPC) and Ultra-High Performance Fiber-Reinforced Concrete (UHPFRC) with Recycled Sand

Feasibility Analysis of Treating Recycled Rock Dust As an Environmentally Friendly Alternative Material in Ultra-High Performance Concrete (UHPC)

Design and Application of UHPC with High Abrasion Resistance

Effect of stone powder and practical evaluation on mechanical property of manufactured sand concrete

Mechanical And Fracture Properties Of Ultra-High Performance Concrete (Uhpc) Containing Waste Glass Sand As Partial Replacement Material

Environmental and Economical Friendly Ultra-High Performance-Concrete Incorporating Appropriate Quarry-Stone Powders

Understanding the Micro-Macro Properties of Sustainable Ultra-High Performance Concrete Incorporating High-Volume Recycled Brick Powder As Cement and Silica Fume Replacement

Effect of Ceramic Waste Tile As a Fine Aggregate on the Mechanical Properties of Low-Carbon Ultrahigh Performance Concrete

Flexural performance of ultra-high performance concrete beams produced with granite manufactured sand

Feasibility of Manufacturing Ultra-High Performance Cement-Based Composites (uhpccs) with Recycled Sand: A Preliminary Study