Abstract:Although manufactured sand is becoming increasingly popular to prepare the cleaner and sustainable construction production in face of the depletion of natural river sand, it needs to be further promoted in some advanced concretes like ultra-high performance concrete (UHPC). Different lithological manufactured sands with the same particle gradation were used as fine aggregates to prepare UHPC in this study. Meanwhile, the UHPC mixtures prepared with washed or unwashed sands were also compared. The following aspects were evaluated: flowability, rheology, setting time, mechanical strength, volume stability, thermogravimetric behavior, pore distribution, microstructure characteristics, environmental and economical benefits. Results indicated that sand washing process greatly lowered the apparent viscosity and yield stress, and improved the flowability of UHPC. Increments of 16.7 %, 19.6 % and 15.7 % in flowability were observed for washed granite, tuff and limestone sand UHPC. Pre-washing process significantly delayed the setting times. Tuff sand UHPC demonstrated the optimal mechanical properties (compressive, flexural and tensile strengths), with a compressive strength exceeding 150 MPa at 28 days. In most cases, sand washing process had a slightly beneficial effect on mechanical strengths. The use of washed sand reduced the autogenous shrinkage of UHPC by 5.1%-10.6 %. Tuff sand UHPC possessed the largest cumulative pore volume, while limestone one had the fewest macropores (>100 nm). The cumulative pore volume and total porosity decreased with the addition of washed sands. Compared with traditional UHPC, the utilization of manufactured sand with different lithology and pre-washing process in UHPC could not only illustrate good workability and mechanical strengths, it also demonstrated lower carbon emissions and production costs. The prepared eco-friendly UHPC in this study effectively utilized the solid waste and lessened the environmental burden, which proposed an emerging approach for the application of manufactured sands in green advanced concretes in future work.

Environmental and Economical Friendly Ultra-High Performance-Concrete Incorporating Appropriate Quarry-Stone Powders

Feasibility Study on Preparing Economical and Environmentally-Friendly High-Flowability Ultra-High Performance Cementitious Composites with Original Graded Stone Powder Free Recycled Manufactured Sands

Recycling Stone Powder As a Partial Substitute for Cementitious Materials into Eco-Friendly Manufactured Sand Ultra-High Performance Concretes: Towards Cleaner and More Cost-Effective Construction Production

Utilization of Solid Waste from Tunnel Excavation As Manufactured Sand with Different Lithology and Pre-Washing Process for Preparation of Eco-Friendly Ultra-High Performance Concretes: Properties and Microstructural Analysis

Improving environmental efficiency of ultra-high-performance concrete (UHPC) through appropriate application of ultrafine quartz powder

Feasibility Analysis of Treating Recycled Rock Dust As an Environmentally Friendly Alternative Material in Ultra-High Performance Concrete (UHPC)

Towards Greener Ultra-High Performance Concrete Based on Highly-Efficient Utilization of Calcined Clay and Limestone Powder

Rheology and Hardened Properties of Eco-Friendly Ultra-High Performance Concrete Paste: Role of Waste Stone Powder Fillers

Optimization and characterization of high-volume limestone powder in sustainable ultra-high performance concrete

Mechanical properties and microstructure of autoclaved green UHPC blended with granite stone powders

Using Limestone Calcined Clay Cement and Recycled Fine Aggregate to Make Ultra-High-performance Concrete: Properties and Environmental Impact

Design and Preparation of Ultra-High Performance Concrete with Low Environmental Impact

Study on workability and mechanical strength of low cement ultra-high performance concrete with ultrafine quartz powder as alternative material under high temperature curing

Development of an Eco-Friendly Ultra-High Performance Concrete Based on Waste Basalt Powder for Sichuan-Tibet Railway

Understanding the Micro-Macro Properties of Sustainable Ultra-High Performance Concrete Incorporating High-Volume Recycled Brick Powder As Cement and Silica Fume Replacement

Possibility and advantages of producing an ultra-high performance concrete (UHPC) with ultra-low cement content

Elucidating the Role of Recycled Concrete Powder in Low-Carbon Ultra-High Performance Concrete (UHPC): Multi-performance Evaluation

Re-using excavated rock from underground tunneling activities to develop eco-friendly ultrahigh performance concrete

The Influence of Containing Supplementary Cementitious Materials on Preparation and Properties for UHPC

Preparation and properties of ultra-high performance concrete incorporation multi-mineral admixtures

Effect of Ceramic Waste Tile As a Fine Aggregate on the Mechanical Properties of Low-Carbon Ultrahigh Performance Concrete