Abstract:Fiber Bragg grating (FBG) has been widely used in many fields for the measurement of temperature, strain, and other parameters, but single-mode FBG has a cross-sensitivity problem between temperature and strain. In this article, a new scheme is proposed to solve the problem by using parallel core–cladding FBGs, whose grating areas are located at the interface region of the core and cladding of the fiber. The sensing principle of parallel core–cladding FBGs for the simultaneous measurement of temperature and strain is theoretically analyzed. The femtosecond laser point-by-point method of the parallel core–cladding FBGs is experimentally investigated. Two parallel FBGs, namely, core FBG and cladding FBG, are formed efficiently and conveniently by a single time inscription. Two transmission peaks have been observed, which are excited by the core mode and the cladding mode. The experiment results demonstrated that the proposed compact sensor can detect the temperature with sensitivity of 11.043 pm/°C and strain with sensitivity of 1.2101 pm/ up to , and the relative errors of temperature and strain are less than 5.8% and 8.3%, respectively. The proposed parallel core–cladding FBGs are much more compact as one FBG element compared with the conventional structure with two cascaded FBGs or parallel FBGs. The parallel core–cladding FBGs can overcome the cross-sensitivity problem of single-mode FBG, which has great application value and potential in fiber sensing fields for dual-parameter.

Compact Dual Fiber Bragg Gratings for Simultaneous Strain and High-Temperature Measurement

A Novel Temperature-Independent Double Fiber Bragg Grating Strain Sensor

Ultrasensitive Parallel Double-Fpis Sensor Based on Vernier Effect and Type II Fiber Bragg Grating for Simultaneous Measurement of High Temperature and Strain

Cascaded Fabry-Perot Interferometer-Regenerated Fiber Bragg Grating Structure for Temperature-Strain Measurement under Extreme Temperature Conditions.

Simultaneous measurement of temperature and strain using double-cladding fiber based hybrid Bragg grating

Optical Fiber Sensor with Double Tubes for Accurate Strain and Temperature Measurement under High Temperature Up to 1000 °C

High Temperature and Strain Dual-Parameters Fiber Sensing Based on Intermodal Interference and Femtosecond Laser Fabricated Fiber Bragg Grating

Temperature And Strain Dual-Parameter Heterogeneous Fiber Bragg Grating Sensor Made By Femtosecond Laser

Simultaneous Independent Temperature and Strain Measurement Using One Fiber Bragg Grating Based on the Etching Technique

Strain and High-Temperature Discrimination Using A Type Ii Fiber Bragg Grating and A Miniature Fiber Fabry-Perot Interferometer

Simultaneous Measurement of Temperature and Strain Based on Compact Parallel Core–Cladding FBGs Inscribed by Femtosecond Laser Point-by-Point Method

Compact Fiber Sensor With High Spatial Resolution for Simultaneous Strain and Temperature Measurement

Strain and Temperature Discrimination Using a Fiber Bragg Grating and Multimode Interference Effects

A Dual-Parameter Fiber Sensor Based on Few-Mode Fiber and Fiber Bragg Grating for Strain and Temperature Sensing

A Temperature and Strain Sensor Based on a Cascade of Double Fiber Bragg Grating

Simultaneous Strain and Temperature Measurements in Composites Using A Multiplexed Fibre Bragg Grating Sensor and an Extrinsic Fabry-Perot Sensor

Simultaneous Measurement of Temperature and Strain Using Spheroidal-Cavity-Overlapped FBG

Simultaneous Strain and Temperature Measurement Using an Integrated Fibre Bragg Grating Extrinsic Fabry-Perot Sensor

Simultaneous Measurement of Strain and Temperature by Two Peanut Tapers with Embedded Fiber Bragg Grating.

Simultaneous Measurement Of Strain And Temperature Using Dual-Period Fiber Grating

Air Gap Fiber Bragg Grating for Simultaneous Strain and Temperature Measurement