Abstract:Independent metering control systems are promising fluid power technologies compared with traditional valve controlled systems. By breaking the mechanical coupling between the inlet and outlet, the meter-out valve can open as large as possible to reduce energy consumptions. However, the lack of damping in outlet causes stronger vibrations. To address the problem, the paper designs a hybrid control method combining dynamic pressure feedback and active damping control. The innovation resides in the optimization of damping by introducing pressure feedback to make trade-offs between high stability and fast response. To achieve this goal, the dynamic response pertaining to the control parameters consisting of feedback gain and cut-off frequency, are analyzed via pole-zero locations. Accordingly, these parameters are tuned online in terms of guaranteed dominant pole placement such that the optimal damping can be accurately captured under a considerable variation of operating conditions. The experiment is deployed in a mini-excavator. The results pertaining to different control parameters confirm the theoretical expectations via pole-zero locations. By using proposed self-tuning controller, the vibrations are almost eliminated after only one overshoot for different operation conditions. The overshoots are also reduced with less decrease of the response time. In addition, the energy-saving capability of independent metering system is still not affected by the improvement of controllability. (C) 2017 Elsevier Ltd. All rights reserved.

Dynamic Response and Vibration Suppression of a Cantilevered Pipe Conveying Fluid under Periodic Excitation

Analysis and Controlling of Pipeline Vibration in Chemical Plant

Minimization of the Beam Response Using Inerter-Based Passive Vibration Control Configurations

Semi-analytical Solution for Dynamic Behavior of a Fluid-Conveying Pipe with Different Boundary Conditions

Random uncertainty modeling and vibration analysis of a straight pipe conveying fluid

Coupling Analysis Of Fluid-Structure Interaction In Fluid-Filled Elbow Pipe

Vibration Control of Conveying Fluid Pipe Based on Inerter Enhanced Nonlinear Energy Sink

Nonlinear Dynamics of a Fluid-Conveying Pipe under the Combined Action of Cross-Flow and Top-End Excitations

An energy-saving hydraulic servo system with safety consideration for pipe fatigue tests.

Vibration FEA of Clamped Fluid-conveying Pipeline with Fluid-structure Interaction Effect

Study on Pipeline Self-Excited Vibration Using Transient Fluid-Structure Coupling Method

Delayed Feedback Control for Flutter in the Pipe Conveying Fluid

Self-Tuning Pressure-Feedback Control by Pole Placement for Vibration Reduction of Excavator with Independent Metering Fluid Power System

Vibration suppression of pipe system with tuned mass damper

Natural frequencies and stability for Z-shaped fluid-conveying pipes with constrained-layer damping – Semi-analytic modeling with experimental validation

Vibration suppression of a beam using variable structure control with disturbance observer

Damping Program of Pipeline Vibration and Engineering Application

Design of Active Controller for Pipe System Vibration Based on Beam Model

Enhanced Targeted Energy Transfer for Adaptive Vibration Suppression of Pipes Conveying Fluid

Application Of Predictive Control To Suppression Of Vibration In Flexible Structure

Experimental study on the vibration characteristics of fluid–structure coupling in the transition process of flexible bending pipes