Abstract:Extensive research and application of recycling methods for spent lithium-ion batteries (LIBs) have been undertaken in recent years with great success. However, the separation of valuable metals from the lixivium of spent LIBs, which contains Al, Cu, Ni, Co, Mn, and Li, is complicated, burdensome, and unsustainable. Therefore, there is a need to establish a more sustainable and energy-efficient method for recycling spent LIBs. The study introduced an innovative methodology for replacing the impurity ion removal process in the lixivium with magnetic separation pretreatment. Then, the co-precipitation method was used to directly resynthesize LiNi0.5- Co0.2Mn0.3O2 (LNCM523) with recovered metals as raw materials. The results demonstrate that, with a magnetic field intensity of 3000 Oe and feed particle size of -0.074 mm, the magnetic separation concentrates the following grades: Ni -26.34%, Co -14.26%, Mn-28.30%, Al -0.23%, and Cu-0.41%. The corresponding recovery rates were also determined as follows: Ni -92.57%, Co -94.16%, Mn-85.68%, Al -1.62%, and Cu-2.14%. The total impurities (Al, Cu, and Fe) in the lixivium obtained by magnetic separation concentrate under conventional acid leaching conditions were below 0.05 wt%, while the contents of Ni, Co, and Mn were measured at 13.08 g/L, 7.10 g/L, and 14.06 g/L, respectively. Spherical LNCM523 was successfully regenerated from the lixivium through co-precipitation and sintering. The LNCM523 demonstrated exceptional electrochemical performance, exhibiting a notable initial discharge capacity of 173.9 mAh/g at 0.2 C and remarkable cycling stability with 91.9% retention over 100 cycles at 0.5 C. In comparison to the conventional approach, this method circumvented the intricate procedure of separating metal ions, thereby realizing the resource regeneration of cathode materials and enabling a closed-circuit recycling process. These advancements contributed to fostering sustainable lowcarbon development of the spent LIBs.

RECOVERY OF LiMn1/3Ni1/3Co1/3O2 FROM SPENT LITHIUM-ION BATTERY USING A SPECIALLY DESIGNED DEVICE

Preparation of LiNi1/3Co1/3Mn1/3O2 cathode materials from spent Li-ion batteries

Electrolytic Separation and Reuse of Active Materials from Discarded Lithium-Ion Batteries

Separation and Regeneration of LiNi 1/3 Co 1/3 Mn 1/3 O 2 Materials from Spent Lithium-Ion Batteries: A Facile Process

Innovative Electrochemical Strategy to Recovery of Cathode and Efficient Lithium Leaching from Spent Lithium-Ion Batteries

Recovery of lithium from the effluent obtained in the process of spent lithium-ion batteries recycling

Recovery Value Metals from Mixed Spent Li-Ion Batteries

Impurity removal with highly selective and efficient methods and the recycling of transition metals from spent lithium-ion batteries

Recovery of Metal Values from Spent Lithium-Ion Batteries with Chemical Deposition and Solvent Extraction

Selective recovery of metals in spent batteries by electrochemical precipitation to cathode material for sodium-ion batteries

A closed-loop process for recycling LiNixCoyMn(1âxây)O2 from mixed cathode materials of lithium-ion batteries

Recovering the Cathode Material Adhered to the Collector and Separator of Spent Lithium-Ion Batteries for Recycling Purposes

Recovery of Lithium and Heavy Non-Ferrous Metals from Spent Lithium-Ion Batteries

Comprehensive Recovery of NCM Cathode Materials for Spent Lithium-Ion Batteries by Microfluidic Device

Recovery of Metal Values from A Mixture of Spent Lithium-Ion Batteries and Nickel-Metal Hydride Batteries

Sustainable Recovery of Cathode Materials from Spent Lithium-Ion Batteries Using Lactic Acid Leaching System

Separation and recovery of valuable metals from spent lithium-ion batteries via concentrated sulfuric acid leaching and regeneration of LiNi1/3Co1/3Mn1/3O2

Sustainable Regeneration of High-Performance Cathode Materials from Spent Lithium-Ion Batteries Through Magnetic Separation and Coprecipitation

In Situ Recombination of Elements in Spent Lithium-Ion Batteries to Recover High-Value γ-LiAlO2 and LiAl5O8

Recycling of Spent Lithium-Ion Batteries to Resynthesize High-Performance Cathode Materials for Sodium-Ion Storage

Selective Recovery of Valuable Metals from Spent Lithium-Ion Batteries – Process Development and Kinetics Evaluation