Industrial-scale highly efficient nickel recovery from electroplating wastewater using resin adsorption followed by aeration mixing acid regeneration
Tong Li,Xianhua Ji,Dongsheng Wang,Qianxin Zhang,Menghan Zhang,Huiyi Zhang,Gang Yu,Shubo Deng
DOI: https://doi.org/10.1016/j.jwpe.2024.104801
IF: 7
2024-01-15
Journal of Water Process Engineering
Abstract:Cation-exchange resins have been used to recover nickel from electroplating wastewater, but resin regeneration often consumes a large amount of acid and alkali, resulting in low Ni(II) concentrations in regenerating solution. In this study, the industrial-scale Ni(II) recovery from electroplating wastewater using resin adsorption and regeneration was investigated. Two cation-exchange resin tanks and one chelated resin tank in series effectively reduced the nickel concentrations to below 0.1 mg/L. The spent resin could be efficiently regenerated by a novel aeration mixing method, greatly reducing acid and alkali consumption in comparison with the traditional downstream regeneration method. The spent resin was successfully regenerated by 2 bed volume (BV) of 6 % HCl, and the acid utilization ratio was above 99 %. More than 60 g/L of Ni(II) ions in regenerating solution was stably obtained, which benefited the subsequent nickel recovery by electrodeposition. Similarly, H 2 SO 4 was also effective for Ni(II) desorption from the spent resins. The adsorption and regeneration cost was calculated to be ¥ 5.5–9.5/m 3 for the electroplating wastewater containing 200–800 mg/L Ni(II) ions, much lower than that by chemical precipitation. This study provided an effective resin regeneration method to consume less regenerants and obtain higher Ni(II) concentrations, making the Ni(II) recovery cost-effective.
engineering, chemical, environmental,water resources