Abstract:As an efficient heat transfer device, two-phase loop thermosyphon (TPLT) has a broad application prospect in many engineering fields, and its internal gas-liquid phase change and flow characteristics are the key factors affecting the heat transfer performance. In order to get a better thermal design and performance, it is necessary to clarify the heat transfer mechanism of the TPLT, especially under the con-dition of high filling ratio. In this study, the visualization experiment was combined with the CFD method to study the heat transfer and flow characteristics of TPLT. Due to the strong coupling relationship among the boiling process and the condensate process, the Lee model is optimized, and the relationship between saturation temperature and local pressure, and the parameter of subcooling degree in the Lee model were both introduced to accurately simulate the phase change process. Results shows that the optimized model has good prediction performance for the heat and mass transfer simulation of the loop thermosyphon. The two-phase flow in the loop thermosyphon changes from slug flow to churn flow with the increase of heating power at low filling ratio (50%), while the bubble size decreases and the number of bubbles increases with the increase of heating power (20W-80W) at high filling ratio (70%). The heat transfer mechanism before and after model optimization has changed, from saturated flow boiling to subcooled flow boiling at high filling ratios. At low filling ratio (50%), the fluid in heating section is saturated state, and the flow velocity at the bottom of the loop is low (0.018m/s). At high filling ratio (70%), the fluid in the heating section is supercooled state, and the fluid flow velocity at the bottom of the loop is high (0.171m/s). This indicates that the heat transfer mechanism of the loop thermosyphon at low filling ratio was saturated pool boiling, and the filmwise condensation occurs in the condensation section. However, the heat transfer mechanism is subcooled flow boiling at high filling ratio, and the gas-liquid two phases in the condensation section are in a mixed state.(c) 2022 Elsevier Ltd. All rights reserved.

Experimental Investigation on a Three-Phase Closed Thermosyphon with Glass Beads/water

Experimental study on three types of transcritical carbon dioxide heat pump water heater systems

Experimental Investigation of Superlong Two-Phase Closed Thermosyphons for Geothermal Utilization

Theoretical and experimental investigation on heat transfer characteristics in a cryogenic two-phase closed thermosyphon

An Experimental Study Of Thermal Performance Of A Two-Phase Loop Thermosyphon (Tplt)-Based Steam Generator: Effects Of Thermal Boundary Conditions

Investigation on the effect of filling ratio on the steady-state heat transfer performance of a vertical two-phase closed thermosyphon

Experimental Study on an Thermosyphon Loop with Bubble Pump Effect

Numerical Investigation of the Two-Phase Closed Thermosyphon Operating with Non-Uniform Heat Flux Profiles

Experimental Investigation on Heat Transfer in Two-Phase Closed Thermosyphon Containing Non-Condensable Gas

Operation characteristics and limitations of small-diameter two-phase closed thermosyphon

Heat Transfer Characteristics and Operational Visualization of Two-Phase Loop Thermosyphon

Analysis on distribution of liquid and vapor phase and heat transfer capacity in evaporator of a two-phase closed thermosyphon

Investigation of the thermal response characteristics of the loop thermosyphon under convective boundary conditions

Numerical Study on Prediction, Evaluation and Restraint Mechanisms of Geyser Boiling Phenomenon in Two-Phase Closed Thermosyphons

Investigation of Heat Transfer and Flow Characteristics in Two-Phase Loop Thermosyphon by Visualization Experiments and CFD Simulations

Heat transfer characteristics of titanium/water two-phase closed thermosyphon

Experimental investigation on heat transfer performance of a cryogenic thermosyphon

Simulation study on heat transfer mechanism of two-phase closed thermosyphon

Experimental investigation on the thermal performance of high temperature two-phase loop thermosyphon

Experimental and theoretical analysis of a closed loop two-phase thermosiphon under various states for latent heat storage

Numerical investigation of surface wettability effect on two-phase closed thermosyphon