Abstract:Recently,active soft materials have attracted widespread attention in the flexible device manufacturing industry.As a typical active soft material,the dielectric elastomer,with two compliant electrodes covering its upper and lower surfaces,constitutes the dielectric elastomer structure.Although the dielectric elastomer structure possesses excellent electromechanical properties,various failures occur frequently when operating in the dynamic environment,which greatly hinders its extensive application.The dynamic stability of an ideal spherical dielectric elastomer balloon is investigated here,which is related to the phenomenon of electro-mechanical instability.Firstly,the governing differential equation with respect to the stretch ratio of the ideal spherical dielectric elastomer balloon is derived according to the principle of virtual work.The free energy function is expressed as the summation of the dielectric energy and the elastic energy described by the Mooney-Rivlin model.Secondly,the relation between the peak value of stationary response and the step voltage/pressure is analytically derived through the first integral of system.The intersection point of the relation curve and the static equilibrium curve gives the critical voltage/pressure.The instability of the spherical dielectric elastomer balloon under different situations is discussed in detail.For any given voltage,there exists a threshold of material constant,below which the structure will remain stable forever.A similar threshold of material constant exists for any pressure with the value of nonzero.For the case with absent pressure,however,there exists a critical voltage,beyond which the structure will be dynamically instable.The influences of the imposed voltage/ pressure,material constant and pre-stretch on the critical state of the dynamic instability are investigated systematically.Pre-stretch will improve the dynamic stability of the spherical dielectric elastomer balloon.This work paves the way for the theoretical research on dynamic instability of soft material,and provides some guidance for the structural and functional design of soft sensors and actuators.

Delayed Electromechanical Instability of a Viscoelastic Dielectric Elastomer Balloon

Dynamic Stability of Spherical Dielectric Elastomer Balloon

New Electromechanical Instability Modes in Dielectric Elastomer Balloons

Giant voltage-induced deformation in dielectric elastomers near the verge of snap-through instability

Electromechanical Performance Of A Viscoelastic Dielectric Elastomer Balloon

Viscoelastic Effect on the Wrinkling of an Inflated Dielectric-Elastomer Balloon

Electromechanical Behavior Of Fiber-Reinforced Dielectric Elastomer Membrane

Random Response of Dielectric Elastomer Balloon to Electrical or Mechanical Perturbation

BALLOON SUBJECTED TO DISTURBED PRESSURE

Dynamic Electromechanical Instability of a Dielectric Elastomer Balloon

Thermo-electro-mechanical instability of dielectric elastomers

Anomalous bulging behaviors of a dielectric elastomer balloon under internal pressure and electric actuation

Reliability Evaluation of Dielectric Elastomer Balloon Subjected to Harmonic Voltage and Random Pressure

Dynamic Stability Evolution of Viscoelastic Dielectric Elastomers with Continuously Varying Electromechanical Parameters

Control Instability and Enhance Performance of a Dielectric Elastomer Balloon with a Passive Layer

Nucleation And Propagation Of Voltage-Driven Wrinkles In An Inflated Dielectric Elastomer Balloon

Stochastic dynamics of dielectric elastomer balloon with viscoelasticity under pressure disturbance

Nonlinear vibration and stability of a dielectric elastomer balloon based on a strain-stiffening model

Dynamic Performance of Dielectric Elastomer Balloon Incorporating Stiffening and Damping Effect

Shape Bifurcation of a Spherical Dielectric Elastomer Balloon Under the Actions of Internal Pressure and Electric Voltage

Time-dependent Electromechanical Phase Transition and Bulging Propagation in a Viscoelastic Dielectric Elastomer Tube