Abstract:Sensitive H-2 gas sensors are highly desirable for the prediction and early-warning of H-2 leakage. Low-dimensional nanostructures of metal oxide semiconductor emerge as promising materials candidates, but it remains a challenge to preserve the nanostructures in the real sensors. In this work, we demonstrated highly sensitive H-2 gas sensors based on porous network of SnO2 nanowires that exhibited ultrasmall diameter similar to 2 nm. Colloidal SnO2 nanowires synthesized via a solvothermal process were drop-coated onto the commercial alumina substrates, followed by in-situ annealing treatment at 350 degrees C to remove the surface ligands. The sensors exhibited sensitive response with linear dependence on the H-2 gas concentration ranging from 2 ppm to 100 ppm when operated at 250 degrees C. Typically, the sensor had a response of 13 toward 40 ppm of H-2, with the response and recovery time being 15 s and 31 s, respectively. To further improve the sensor performance, Palladium doped SnO2 nanowires were thoroughly investigated. It's shown that, the operating temperature of the sensor decreased from 250 degrees C to 150 degrees C after Pd doping, and the response and recovery time decreased to 6 s/3 s. The superb sensitivity was attributed to the enhanced gas reception, electron transport as well as utility factor owing to the network nanostructure of ultrathin SnO2 nanowires and catalytic activity of Pd, according to theoretical calculation and adsorption kinetics studies. Combined with the excellent solution processability, the colloidal SnO2 nanowires are potentially attractive for next-generation gas sensors with lower power consumption and integration with silicon-based substrates.

Synthesis and Low-Temperature Sensing Property of the Porous ZnCo2O4 Nanosheets

Extremely Sensitive and Accurate H2S Sensor at Room Temperature Fabricated with In-doped Co3O4 Porous Nanosheets

Room-Temperature High-Performance H2S Sensor Based on Porous CuO Nanosheets Prepared by Hydrothermal Method.

Sensitive H2 Gas Sensors Based on SnO2 Nanowires

Porous CuO/SnO2 Composite Nanofibers Fabricated by Electrospinning and Their H2S Sensing Properties

ZnO-carbon Nanofibers for Stable, High Response, and Selective H2S Sensors.

Hydrothermally synthesized MXene Ti3C2/Zn2SnO4 based nanocomposite for H2S sensing at room temperature

3D Porous MXene Nanosheet/SnO2 Nanoparticle Composites for H2S Gas Sensing

The preparation of MOFs-derived ZnO/Co3O4 nanocages and its sensing performance to H2S

Preparation and Gas-Sensing Performances of ZnO/CuO Rough Nanotubular Arrays for Low-Working Temperature H2S Detection

Pt Nanoparticle-Modified SnO 2 –ZnO Core–Shell Nanosheets on Microelectromechanical Systems for Enhanced H 2 S Detection

3D Porous MXene Nanosheet/SnO 2 Nanoparticle Composites for H 2 S Gas Sensing

High-response H2S sensor based on ZnO/SnO2 heterogeneous nanospheres

Pt Nanoparticle-Modified SnO<sub>2</sub>-ZnO Core-Shell Nanosheets on Microelectromechanical Systems for Enhanced H<sub>2</sub>S Detection

Synthesis and H2S Sensing Properties of CuO−SnO2 Core/Shell PN-Junction Nanorods

A high-performance gas sensor for the detection of H2S based on Nd2O3-doped ZnO nanoparticles

Detection of H2S down to ppb levels at room temperature using sensors based on ZnO nanorods

Hydrothermal synthesis of hierarchically flower-like CuO nanostructures with porous nanosheets for excellent H2S sensing

Sensitive Room-Temperature H2S Gas Sensors Employing SnO2 Quantum Wire/Reduced Graphene Oxide Nanocomposites

Solution-processed SnO2 nanowires for sensitive and fast-response H2S detection

Highly Sensitive Detection of H2s Gas at Low Temperature Based on Znco2o4 Microtube Sensors