Abstract:The DAMPE (DArk Matter Particle Explorer) is a scientific satellite being developed in China, aimed at cosmic ray study, gamma ray astronomy, and searching for the clue of dark matter particles in the near future. The BGO (Bismuth Germanate Oxide) Calorimeter, which consists of 616 PMTs (photomultiplier tubes) and 1848 dynode signals, is a crucial part of the DAMPE payload for measuring the energy of cosmic ray particles, distinguishing interesting particles from background, and providing trigger information. An electronics system, which consists of 16 FEE (Front End Electronics) modules with a total power consumption of about 26 W, has been developed. Its main functions are based on the low power, 32-channel VA160 and VATA160 ASICs (Application Specific Integrated Circuits) for precisely measuring the charge of PMT signals and providing“hit”signals as well. To assure the long-term reliability in harsh space environment, a series of critical issues such as the radiation hardness, thermal design, components and board level quality control, etc., are taken into consideration. Test result showed that the system level ENC (equivalent noise charge) for each channel is about 10 fC in RMS (root mean square), and the timing uncertainty of the hit signals is about 300 ns, both of which satisfy the physics requirements of the detector. Experiments with 60Co radioactive source proved that 20 krad(Si) TID (Total Ionizing Dose) level is achieved, while the heavy ion beam and laser beam tests indicated that its SEL (Single Event Latch-up) and SEU (Single Event Upset) performance in orbit will be acceptable by taking some hardness measures. All the readout modules successfully passed the board-level screening, the sub-system level and finally the satellite system level environmental tests, and behave well in the beam test at CERN (European Organisation for Nuclear Research).

The Design and Realization of the Payload Integrated Test System for DAMPEtwo

Design of the Readout Electronics for the Bgo Calorimeter of Dampe Mission

A ground automatic testing system for the BGO calorimeter of dark matter particle explorer satellite

Design and On-Orbit Status of the Trigger System for the DAMPE Mission

Calibration and Performance of the Neutron Detector Onboard of the DAMPE Mission

Design of A Test Platform for Screening Procedures of Va160 and Vata160 Asics in Dampe Mission

On-orbit calibration and long-term performance of the DAMPE trigger system

A versatile PMT test bench and its application in the DAMPE-PSD

Readout Electronics of DAMPE BGO Calorimeter and the Status During the First 18 Months in Orbit

Thermal Design and Validation of DAMPE BGO Calorimeter

Design of the Readout Electronics for the Qualification Model of DAMPE BGO Calorimeter

Logical Architecture Design of Integrated Electronic System with High Real-Time and Reliability in ZDPS-2 Pico-Satellite

Offline Software for the DAMPE Experiment

The On-Orbit Calibration of DArk Matter Particle Explorer

Performance of the DAMPE silicon-tungsten tracker during the first 5 years of in-orbit operations

The BGO Electromagnetic Calorimeter Sub-Trigger Electronics for DAMPE

Readout System for Ground-Based Tests of BGO Calorimeter of DAMPE Satellite

Beam Verification of the Large Dynamic Range Readout Design of DAMPE-PSD

Report on Space-Qualified Readout Electronics for the BGO Calorimeter of DAMPE Mission

Quality control of mass production of PMT modules for DAMPE

The DArk Matter Particle Explorer Mission