Abstract:Semiconductor single-crystalline polar NiO(111) nanosheets with well-defined hexagonal holes have been investigated for application in dye adsorption and combustion processes. With regard to adsorption technologies, high surface area metal oxides have an advantage over activated carbon in that the adsorbed species can be combusted and the adsorbent reused in the case of metal oxides while regeneration of activated carbon remains challenging and thus the adsorbent/adsorbate system must be disposed of. Here, three typical textile dyes, reactive brilliant red X-3B, congo red and fuchsin red, were studied for removal from wastewater with two NiO systems and activated carbon. These studies revealed that the NiO(111) nanosheets exhibited much more favorable adsorptive properties than conventionally prepared nickel oxide powder (CP-NiO) obtained from thermal decomposition of nickel nitrate. The maximum adsorption capabilities of the three dyes on NiO(111) nanosheets reached 30.4 mg g(-1), 35.15 mg g(-1) and 22 mg g(-1) for reactive brilliant red X-3B, congo red and fuchsin acid, respectively, while the maximum adsorption capabilities of the three dyes on CP-NiO were only 8.4, 13.2 and 12 mg g(-1) for reactive brilliant red X-3B, congo red and fuchsin acid. To simulate the adsorption isotherm, two commonly employed models, the Langmuir and the Freundlich isotherms, were selected to explicate the interaction of the dye and NiO(111). The isotherm evaluations revealed that the Langmuir model demonstrated better fit to experimental equilibrium data than the Freundlich model. The maximum predicted adsorption capacity was 36.1 mg g(-1). In addition, adsorption kinetic data of NiO(111) followed a pseudo-second-order rate for congo red. These studies infer that NiO(111) nanosheets possess desirable properties for application in adsorption and combustion applications.

Selective adsorption of anionic dyes from aqueous solution by nickel (II) oxide

NiO(111) nanosheets as efficient and recyclable adsorbents for dye pollutant removal from wastewater

Removal of Aqueous Ni(Ii) with Carbonized Leaf Powder: Kinetics and Equilibrium

Characteristics and Mechanisms of Ni(II) Removal from Aqueous Solution by Chinese Loess

Effective removal of industrial dye from aqueous solution using mesoporous nickel oxide: a complete batch system evaluation

Synthesis and Characterization of Pd-Ni Bimetallic Nanoparticles as Efficient Adsorbent for the Removal of Acid Orange 8 Present in Wastewater

Ion Imprinted Adsorbent for the Removal of Ni(II) from Waste Water: Preparation, Characterization, and Adsorption

Hierarchical flower-like nickel(II) oxide microspheres with high adsorption capacity of Congo red in water

Effective and sequential removal of acid and basic dye wastewater with metallic hybrid mesoporous silica

Hexagonal Ni(OH)2 nanosheets for stabilizing Pickering emulsion and Congo red adsorption

Comparison activity of pure and chromium-doped nickel oxide nanoparticles for the selective removal of dyes from water

Fabrication of nickel-iron layered double hydroxides using nickel plating wastewater via electrocoagulation, and its use for efficient dye removal

Highly selective adsorption of organic dyes containing sulphonic groups using Cu2(OH)3NO3 nanosheets

Synthesis, magnetic and adsorption of dye onto the surface of NiO nanoparticles

Porous NiFe-oxide Nanocubes Derived from Prussian Blue Analogue As Efficient Adsorbents for the Removal of Toxic Metal Ions and Organic Dyes.

Mn3O4–MnOOH nanocomposites for the adsorption-based removal of nickel ions from wastewater

Preparation and Optimization of Polyaniline/ Titanium Dioxide/ Carboxymethyl Cellulose Powder for Effective Nickel Adsorption

Cauliflower-Like Ni/Nio And Nio Architectures Transformed From Nickel Alkoxide And Their Excellent Removal Of Congo Red And Cr(Vi) Ions From Water

SiO2/Ni-GA nanoporous composite as an efficient adsorbent for the removal of cationic and anionic dyes

Remarkable Purification of Organic Dyes by NiOOH-modified Industrial Waste Residues

Nickel ion removal from aqueous solutions through the adsorption process: a review