Abstract:A weakly coupled multi–core fiber with the standard 125–μm cladding diameter has shown promise as a next–generation large–capacity transmission medium for long–haul networks that can provide multiple optical paths while maintaining the existing cable structure. In this paper, we numerically and experimentally demonstrate a standard cladding 4–core fiber (4CF) with a superior transmission performance in terms of figure–of–merit (FOM), which is defined as the relative spectral efficiency to a conventional G.654 fiber, by simultaneously optimizing the design of its effective area and loss and crosstalk characteristics for submarine transmission. By considering a counter–propagation configuration among neighboring cores, we can obtain larger effective area of the optimized 4CF design because of the relaxed tradeoff relationship with the crosstalk. Specifically, we report a 10,140–km transmission with the spectral efficiency of 7.52 bit/s/Hz using a counter–propagation configuration, which indicates we can exceed a 1 Pbit/s cable capacity when considering a conventional 17–mm–diameter submarine cable. We also investigate the applicability of the standard cladding 4CF to wide–band transmission in the C+L band to see if it is appropriate for a long–distance terrestrial system. Our findings show that our design of 4CF to maximize the FOM for co– and counter–propagation between cores enables us to obtain a higher FOM in not only the C band but also the C+L band.

Wide Band Multimode Fiber With A 30 Mu M-Core And Fluorine-Doped Cladding To Support Error-Free 4x25 Gb/S Swdm Transmission Over 250 Meters

Wideband multimode fiber with an optimized core size and fluorine-doped cladding for high-speed SWDM and CWDM transmission.

8×250 Gbit/s PAM4 Transmission over 1 Km Single Mode Fiber with an All-Silicon LAN WDM Transmitter.

Design of 125-Μm Cladding Diameter Multicore Fibers with High Core Multiplexing Factor for Wideband Optical Transmission

Ultra-long-haul L-band WDM Transmission over a Standard Single-Mode Fiber Loop Using DCF+CFBG Hybrid Dispersion Compensation

High-Speed PDM-RZ-8QAM DWDM Transmission (160 $\times$ 114 Gb/s) over 640 Km of Standard Single-Mode Fiber

Multimode and Single-Mode Fiber Compatible Graded-Index Multicore Fiber for High Density Optical Interconnect Application

32Tb/s (320×114Gb/s) PDM-RZ-8QAM transmission over 580km of SMF-28 ultra-low-loss fiber

16×10.7 Gb/s transmission over 1600 km of single-mode fiber with gain equalization filter and dispersion-management

MIMO-free 20-Gb/sx4x2 WDM-MDM Transmission over 151.5-km Single-span Ultra Low-Crosstalk FMFs

High-Throughput and Long-Distance Transmission With >120 nm S-, C- and L-Band Signal in a 125μm 4-Core Fiber

8X622mb/s Hd-Wdm Optical Fiber Transmission over 420 Km

MIMO-Free $20-\text{Gb}/\mathrm{s}\times 4\times 2$ WDM-MDM Transmission Over 151.5-km Single-Span Ultra Low-Crosstalk FMFs

Transmission Of 4x28-Gb/S Pam-4 Over 160-Km Single Mode Fiber Using 10g-Class Dml And Photodiode

82.29-Tb/s (182x560-Gb/s) Transmission of 42GHz-Spaced WDM PDM-128-QAM OFDM Signals over 100-km SMF

Transmission of 10gb/s Wdm Signals over 4000 Km of Standard Single-Mode Fiber with 106 Km Spans Using All-Raman Amplification and Nrz Format

High Figure–of–Merit Multi–Core Fiber with Standard Cladding Diameter for Long–Haul and Wide–Band Transmission

130.6-Tb/s Self-homodyne Coherent Transmission over Weakly-Coupled FMF for Data Center Applications

Single-Channel 102.4-Gb/s Transmission over 240-km SSMF with Optical SSB Nyquist-PAM-4 and Direct Detection

3×4×10-Gb/s MDM-WDM Transmission over 21-Km OM3 MMF with OOK Modulation and Direct Detection

4.096 Tbit/s multidimensional multiplexing signals transmission over 1000 km few mode fiber