Abstract:<p>The low-cycle fatigue properties, microstructural evolution and crack growth behaviors of a low-carbon carbide-free bainitic steel subjected to austempering at 300, 320 and 350 °C have been investigated. The results indicated that the fatigue lifetimes of the specimens increase with decreasing the austempering temperature at lower total strain amplitudes, but a comparable fatigue lifetime or even an opposite result is observed at higher total strain amplitudes. During fatigue loading, the blocky retained austenite with inhomogeneous carbon distribution partially transforms into martensite, and the transformation amount increases with the total strain amplitude, especially for the specimens austempered at high temperatures. The transformed martensite and the untransformed austenite satisfy a Kurdjumov-Sachs (K–S) orientation relationship, which can increase the cooperative deformation capacity between the both phases. However, with continuous cycling, more martensite is formed, and these newly formed martensite grains are more likely to form micro-voids/cracks due to their brittleness, which reduces the crack initiation lifetime, and become the fast path for crack propagation, which deteriorates the crack propagation lifetime. Alternatively, more crack branching, crack deflection and severely twisted bainitic ferrite laths are observed for the specimens austempered at high temperatures, which helps to delay/hinder crack growth and increase the crack propagation lifetime, especially at high total strain amplitudes. This suggests that the fatigue lifetime can be closely associated with the interactions of the crack initiation and propagation caused by mechanically-induced martensite from retained austenite.</p>

Cyclic Deformation Behavior and Microstructure Evolution of High-Carbon Nano-Bainitic Steel at Different Tempering Temperatures

Cyclic deformation behaviors of a high strength carbide-free bainitic steel

Low-cycle fatigue behavior and microstructural evolution in a low-carbon carbide-free bainitic steel

Cyclic Deformation Behavior of Steels with a Nanolamellar Microstructure and Tensile Strength of 1500 MPa

Low Cycle Fatigue Behavior in A Medium-Carbon Carbide-Free Bainitic Steel

Inconsistent Effects of Austempering Time Within Transformation Stasis on Monotonic and Cyclic Deformation Behaviors of an Ultrahigh Silicon Carbide-Free Nanobainite Steel

Cyclic deformation behaviours of 18Mn3Si2CrNiMo multiphase (martensite/bainite/retained austensite) steel

Cyclic Stress Induced Phase Transformation in Super-Bainitic Microstructure

Effects of austempering temperature on bainitic microstructure and mechanical properties of a high-C high-Si steel

Dynamic continuous cooling transformation, microstructure and mechanical properties of medium-carbon carbide-free bainitic steel

The fatigue properties, microstructural evolution and crack behaviors of low-carbon carbide-free bainitic steel during low-cycle fatigue

Evolution of tensile properties with transformation temperature in medium-carbon carbide-free bainitic steel

Effect of austempering temperature on microstructure and cyclic deformation behaviour of multiphase low-carbon steel

Effect of Tempering Temperature on Microstructure and Mechanical Properties of Nanostructured Bainitic Steel

High-cycle Bending Fatigue Behaviour of Nanostructured Bainitic Steel

Effect of Carbon Content in Retained Austenite on the Dynamic Tensile Behavior of Nanostructured Bainitic Steel

Micro Plastic Deformation Behavior Of Carbide-Free Bainitic Steel During Tensile Deformation Process

In-situ Observation of Tensile Deformation and Retained Austenite Transformation Behaviors in Carbide-Free Bainitic Steel

Effect of Cyclic Intercritical Tempering on the Microstructure and Mechanical Properties of a Low-Carbon Cu-Bearing 7Ni Steel

Cyclic Hardening and Dynamic Strain Aging During Low-Cycle Fatigue of Cr-Mo Tempered Martensitic Steel at Elevated Temperatures

Tensile Deformation Behavior of High Strength Anti-Seismic Steel with Multi-Phase Microstructure