Abstract:Space double-layer cylindrical reticulated shells (SDLCRS) have undergone rapid development in the four three decades. Significantly different from conventional multistory high-rise structures, such structures are very sensitive to vertical actions. As a result, conventional seismic isolation techniques that aim to reduce horizontal seismic actions are notably insufficient for this kind of structure. In this study, a new three-dimensional seismic isolation bearing was developed that can simultaneously reduce the horizontal and vertical seismic responses of an SDLCRS. To examine the actual seismic isolation effectiveness of the three-dimensional seismic isolation bearing and provide important theoretical, technical and experimental support for practical engineering applications, comparative shaking table tests were performed on isolated and non-isolated SDLCRSs with lower supporting structures. The 2013 Lsf ground motion record during Lushan earthquake and the 1954 Taft ground motion record were selected as seismic inputs. The dynamic responses including acceleration, displacement and strain of the SDLCRS under the input ground motions with different amplitudes were obtained using the shaking table tests. In addition, the seismic damage of the isolated and non-isolated structures was examined to determine the acceleration amplification effect of the structures. The effectiveness in acceleration and strain responses demonstrated that the three-dimensional seismic isolation bearing was very useful for horizontal and vertical seismic isolation. Moreover, the maximum displacement responses of the bearing were less than half of the respective design displacements, suggesting that the bearing still had considerable reserve bearing capacity and could significantly improve the safety of an SDLCRS under seismic loads. The bearing developed in this study not only has excellent seismic isolation performance and post earthquake restoration capability but can also be easily installed and maintained. Thus, this bearing holds great promise for engineering applications and is suitable for SDLCRS that require both horizontal and vertical seismic isolation.

Study on Column-Top Seismic Isolation of Single-Layer Latticed Domes

Seismic response of a large span single layer reticular dome with surrounding columns considering horizontal wave passage effect

INSTABILITY BEHAVIOR OF PARTIAL DOUBLE-LAYER LATTICE-RIBBED DOMES

Seismic Performance of Pentagonal Type Aluminum Alloy Suspen-Dome Structure with Large Opening

Dynamic Analysis of Suspend-Dome

Stability analysis of the partial double-layer forms derived from the complete double-layer reticulated dome

Formation and Buckling Performance Investigations on Partial Double Layer Reticulated Spherical Domes of High Rise/Span Ratios

Influence of restraining stiffness on mechanical properties of suspen-dome

Research On Influence Of Constrain Stiffness To Mechanical Response Of Suspen-Dome

Study on Dynamic Characteristics and Behavior of Cable Dome Subjected to Multi-Dimensional and Multi-Point Seismic Excitations

Static Experiment of Herringbone Ribbed Cable Dome

METICULOUS STUDY ON DYNAMIC PERFORMANCE OF SUSPEND-DOME STRUCTURE UNDER SEVERE EARTHQUAKES

Experimental and numerical study on stability behavior of reticulated shell composed of plate members

Distribution of Initial Pre-Stress and Stability Analysis of Suspen-Dome

Seismic evaluation of isolation performance on single layer cylindrical reticulated shells supported along four sides

Shaking table test of space double-layer cylindrical reticulated shell with three-dimensional isolation bearing

Study on global stability of the single-layer elliptical lattice dome

Seismic protection of a single-layer spherical lattice shell structure using a separated three-dimensional isolation system

Seismic performance improvement of a three-dimensional isolated spherical reticulated shell structure using pseudo-negative-stiffness magnetorheological dampers

Mechanical Behavior of Laminated Rubber Isolation Bearing with Buckling Steel Plate

Seismic responses of multi-story building isolated by Lead-Rubber Bearings considering effects of the vertical stiffness and buckling behaviors