Abstract:With the growing incidence of cardiovascular disease (CVD) in recent decades, the demand for out-of-hospital real-time ECG monitoring is increasing day by day, which promotes the research and development of portable ECG monitoring equipment. At present, two main categories of ECG monitoring devices are "limb lead ECG recording devices" and "chest lead ECG recording devices", which both require at least two electrodes. The former needs to complete the detection by means of a two-hand lap joint. This will seriously affect the normal activities of users. The electrodes used by the latter also need to be kept at a certain distance, usually more than 10 cm, to ensure the accuracy of the detection results. Decreasing the electrode spacing of the existing ECG detection equipment or reducing the area required for detection will be more conducive to improving the integration of the out-of-hospital portable ECG technologies. Therefore, a single-position ECG system based on charge induction is proposed to realize ECG detection on the surface of the human body with only one electrode with a diameter of less than 2 cm. Firstly, the ECG waveform detected in a single location is simulated by analyzing the electrophysiological activities of the human heart on the human body surface with COMSOL Multiphysics 5.4 software. Then, the hardware circuit design of the system and the host computer are developed and the test is performed. Finally, experiments for static and dynamic ECG monitoring are carried out and the heart rate correlation coefficients are 0.9698 and 0.9802, respectively, which proves the reliability and data accuracy of the system.

A Lead-Off Detection Design for an Improved Front of Bioelectrical Signal Acquisition

Research of Wireless Electrocardiograph Signal Sampling System

Design of a self-organized Intelligent Electrode for synchronous measurement of multiple bio-signals in a wearable healthcare monitoring system

Design of Wireless SEMG Acquisition Instrument

Intelligent electrode design for long-term ECG monitoring at home: Prototype design using FPAA and FPGA

An Improved Front End Design for Bioelectrical Signal Acquisition

A Novel Front-End Design for Bioelectrical Signal Wearable Acquisition

The Electrocardiosignal Collection and R-wave Synchronized Detection

Multimodal Integrated Flexible Neural Probe for in Situ Monitoring of EEG and Lactic Acid

Design of a Wearable 12-Lead Noncontact Electrocardiogram Monitoring System

Design of a Compact Wireless EEG Recorder with Extra-High Sampling Rate and Precise Time Synchronization for Auditory Brainstem Response

Optimized Electrode Locations For Wearable Single-Lead Ecg Monitoring Devices: A Case Study Using Wfees Modules Based On The Lans Method

An Active Electrode Design For Weak Biosignal Measurements

A Wireless 8-Channel ECG Biopotential Acquisition System for Dry Electrodes

Flexible Non-contact Electrodes for Wearable Biosensors System on Electrocardiogram Monitoring in Motion

Design and Implementation of a Portable and Remote ECG monitoring System for CareON

Effective Biopotential Signal Acquisition: Comparison of Different Shielded Drive Technologies

Single Position ECG Detection System Based on Charge Induction.

A High-Performance System for Weak ECG Real-Time Detection

Reduction in the Motion Artifacts in Noncontact ECG Measurements Using a Novel Designed Electrode Structure

Experimental characterization of detecting and processing method for ECG applications