Abstract:Recently, ultrasound transit time spectroscopy (UTTS) was proposed as a promising method for bone quantitative ultrasound measurement. Studies have showed that UTTS could estimate the bone volume fraction and other trabecular bone structure in ultrasonic through-transmission measurements. The goal of this study was to explore the feasibility of UTTS to be adapted in ultrasonic backscatter measurement and further evaluate the performance of backscattered ultrasound transit time spectrum (BS-UTTS) in the measurement of cancellous bone density and structure. First, taking ultrasonic attenuation into account, the concept of BS-UTTS was verified on ultrasonic backscatter signals simulated from a set of scatterers with different positions and intensities. Then, in vitro backscatter measurements were performed on 26 bovine cancellous bone specimens. After a logarithmic compression of the BS-UTTS, a linear fitting of the log-compressed BS-UTTS versus ultrasonic propagated distance was performed and the slope and intercept of the fitted line for BS-UTTS were determined. The associations between BS-UTTS parameters and cancellous bone features were analyzed using simple linear regression. The results showed that the BS-UTTS could make an accurate deconvolution of the backscatter signal and predict the position and intensity of the simulated scatterers eliminating phase interference, even the simulated backscatter signal was with a relatively low signal-to-noise ratio. With varied positions and intensities of the scatterers, the slope of the fitted line for the log-compressed BS-UTTS versus ultrasonic propagated distance (i.e., slope of BS-UTTS for short) yield a high agreement (r2 = 99.84%-99.96%) with ultrasonic attenuation in simulated backscatter signal. Compared with the high-density cancellous bone, the low-density specimen showed more abundant backscatter impulse response in the BS-UTTS. The slope of BS-UTTS yield a significant correlation with bone mineral density (r = 0.87; p < 0.001), BV/TV (r = 0.87; p < 0.001), and cancellous bone microstructures (r up to 0.87; p < 0.05). The intercept of BS-UTTS was also significantly correlated with bone densities (r = -0.87; p < 0.001) and trabecular structures (|r|=0.43-0.80; p < 0.05). However, the slope of the BS-UTTS underestimated attenuation when measurements were performed experimentally. In addition, a significant non-linear relationship was observed between the measured attenuation and the attenuation estimated by the slope of the BS-UTTS. This study demonstrated that the UTTS method could be adapted to ultrasonic backscatter measurement of cancellous bone. The derived slope and intercept of BS-UTTS could be used in the measurement of bone density and microstructure. The backscattered ultrasound transit time spectroscopy might have potential in the diagnosis of osteoporosis in the clinic.

Ultrasonic backscatter characterization of cancellous bone using a general Nakagami statistical model

A Numerical Simulation Method for Ultrasonic Transmission in Cancellous Bone Based on a Four-Parameter Random Growth Method

Relationships of Ultrasonic Backscatter with Bone Densities and Microstructure in Bovine Cancellous Bone.

Associations Between Ultrasonic Backscatter, Bone Density, and Microstructure in Cancellous Bone Characterization

Cancellous bone characterization using ultrasonic backscatter parametric imaging

Characterization of Cancellous Bone Microstructure by Using Ultrasonic Apparent Backscatter Imaging

The Relationship Between Ultrasonic Backscatter and Trabecular Anisotropic Microstructure in Cancellous Bone

Effect of Spectral Estimation on Ultrasonic Backscatter Parameters in Measurements of Cancellous Bones.

Feasibility Study of Ultrasonic Backscatter Coefficient in Assessment of Cancellous Bone

Analysis of frequency dependence of ultrasonic backscatter coefficient in cancellous bone.

The Ability of Ultrasonic Backscatter Parametric Imaging to Characterize Bovine Trabecular Bone

Ultrasonic Backscatter Theory, Method, and Diagnostic Instrument for Cancellous Bone

Ability of Ultrasonic Apparent Backscatter to Reflect Cancellous Bone Densities

Correlations between signal spectrum of ultrasonic backscatter and cancellous bone microstructure

Predict Ultrasonic Backscatter Coefficient in Cancellous Bone by Theory and Experiment.

Backscatter measurement of cancellous bone using the ultrasound transit time spectroscopy

Measurement and Compensation of Frequency-Dependent Attenuation in Ultrasonic Backscatter Signal from Cancellous Bone

Application of Dynamic Time Warping Technique to Evaluate Microstructures of Cancellous Bones

A Portable Ultrasonic Backscatter Measurement Instrumentation Integrated Amplitude Modulation and Multiple Lengths Excitation for Estimation Cancellous Bone Characteristics

Spatial frequency domain ultrasonic backscatter parameters for evaluation of bone

Microstructure Characterization of Cancellous Bone Based on Ultrasonic C-Scan Imaging