Abstract:The interactions of femtosecond lasers with gold targets were investigated with a numerical method combining molecular dynamics (MD) and the two-temperature model (TTM). Previous works using MD-TTM method did not consider all the thermodynamic parameters and the interatomic potential dependent of the electron temperature simultaneously. Therefore, we developed a LAMMPS function to achieve this. To accurately capture the physics behind the interactions, we also included the electron blast force from free electron pressure and the modified Fourier law with steep electron temperature gradient in our model. For bulk materials, a stress non-reflecting and heat conducting boundary is added between the atomistic and the continuum parts. The modified boundary force in our study greatly reduces the reflectivity of the atomistic-continuum boundary compared with its original form. Our model is the first to consider all these factors simultaneously and manage to predict four femtosecond laser ablation phenomena observed in the experiments. In this dissertation, the thermodynamic parameters in the two-temperature model were extensively explored. We considered three different approaches to calculate these parameters: namely interpolation, ab initio calculation, and analytical expression. We found that simple interpolation between solid state and plasma state could lead to high level of inaccuracy, especially for electron thermal conductivity. Therefore, ab initio calculation and analytical expression were used for the calculation of the thermodynamic parameters in more advanced studies. The effects of electron thermal conductivity and electron-phonon coupling factor on electron and lattice temperatures were analyzed.Our studies considered electron temperature dependent (ETD) and electron temperature independent (ETI) interatomic potentials. The ETI interatomic potential is easier to implement and therefore it is used in our phase change study to investigate the effects of target thickness on melting. Homogeneous melting occurred for thin films, while melting can be observed through the movement of the solid-liquid interface in thick or bulk materials. However, the ETI potential overestimated the bond strength at high temperatures. Therefore, ablation process was studied with the ETD potential. Three ablation mechanisms were found in our simulations at different laser fluences. Short nonthermal ablation was only observed at the ablation threshold. With increasing laser fluence, spallation was then seen. In high laser fluence regime, phase explosion occurred on the surface and coexisted with spallation.Lastly, we researched on the effects of the delay time between two femtosecond laser pulses. Various delay times did not have much influence on melting depth. In low laser fluence regime, with increasing delay time, the target went through nonthermal ablation, to spallation and to no ablation. In high laser fluence regime, longer delay time encouraged phase explosion while suppressed spallation.

Solid-to-super-critical Phase Change and Resulting Stress Wave During Internal Laser Ablation

Solid-to-super Critical Phase Change during Laser Internal Ablation

Phase and morphological changes of crystalline material during internal cavity fabrication using laser ablation

Phase Change and Stress Wave in Picosecond Laser–material Interaction with Shock Wave Formation

Stress waves in laser-material interaction: From atomistic understanding to nanoscale characterization

Molecular Dynamics Simulation on Femtosecond Laser Ablation of Metal

Theoretical and experimental investigations in thermo-mechanical properties of fused silica with pulsed CO2 laser ablation

Hybrid Atomistic-Macroscale Modeling of Long-Time Phase Change in Nanosecond Laser–material Interaction

Molecular Dynamics Investigation Of Phase Change Induced By Ultrafast Laser Irradiation

A generalized thermoelastic Stefan problem with spatio-temporal nonlocal effect in picosecond pulse laser material processing

A fractional dual-phase-lag generalized thermoelastic model of ultrashort pulse laser ablation with variable thermal material properties, vaporization and plasma shielding

Molecular Dynamics Simulation of Thermal and Thermomechanical Phenomena in Picosecond Laser Material Interaction

Laser Ablation Of Crystalline Material With And Without Water On Material Surface

Experimental and Computational Study of Damage Pocess Induced by 1064 Nm Nanosecond Laser Pulse on the Exit Surface of Fused Silica

Study of the Effects of Stress Wave Behavior in Laser-Induced Exit-Surface Damage of Fused Silica Using Time-Resolved Multi-Polariscopic Imaging

PHASE CHANGE AND ABLATION STUDY OF METALS BY FEMTOSECOND LASER IRRADIATION USING HYBRID TTM/MD SIMULATIONS

Analysis and Experimental Study of the Temperature and Stress Distribution in the Slab of a Solid-State Heat Capacity Laser

Study on Ultra-Short Laser Pulse Ablation of Metals by Molecular Dynamics Simulation

Quantum Hooke's Law to Classify Pulse Laser Induced Ultrafast Melting

Shock Induced Phenomena In High Fluence Femtosecond Laser Ablation Of Silica Glass

Thermal Effects in Laser-Induced Strong Shock-Waves