Abstract:Benzene alkylation with CO2/H2 is a doubly beneficial option to upgrade benzene toward valuable products, in which benzene can be converted into valuable toluene and xylene, while CO2 can be utilized as an alkylation reagent to mitigate the greenhouse effect. It is quite challenging to ascertain the critical rule of zeolite regulation for the synergistic effect in oxide-zeolite composite (OXZEO) catalysts, a series of bifunctional catalysts were investigated in this work, consisting of ZnZrO x solid solution and nano-sized HZSM-5 with uniform size distribution and distinct acid properties. Key parameters affecting the catalyst performance were analyzed and optimized in this tandem reaction, namely, the mass ratio of two components, the SiO2/Al2O3 ratio of HZSM-5, and the proximity between ZnZrO x and HZSM-5. Due to the increased active site accessibility originating from nano-sized HZSM-5, the combined selectivity of toluene and xylene reaches 94.6% at 31.3% benzene conversion, respectively. Moreover, low ethylbenzene selectivity (<1%) has been achieved. It is worth noting that the long-term stability test indicates a faster deactivation in the nano-sized HZSM-5 system as compared with the micro-sized counterpart. Based on EDS mappings, it is found that nano-sized HZSM-5 experiences a more severe metal migration issue, resulting in lower catalyst stability. The reaction mechanism with formate-methoxy intermediates and the synergistic effect of CO2 hydrogenation-alkylation were further confirmed by in situ diffuse reflectance infrared Fourier transformations spectroscopy and gas chromatography–mass spectrometry. By correlating zeolite size and acidity with catalytic performances, these findings could facilitate the further rational design of OXZEO catalysts toward CO2 catalytic conversions.

Enhancement of the Utilization of Methanol in the Alkylation of Benzene with Methanol over 3-Aminopropyltriethoxysilane Modified HZSM-5

Effect of Methanol on Catalytic Performance of Hy Zeolite for Desulfurization of Fcc Gasoline by Alkylation

Influence of Acid-Base Properties of ZnMgAl-mixed Oxides for the Synthesis of 1-Methoxy-2-propanol

Direct synthesis of HZSM-5 zeolites with enhanced catalytic performance in the methanol-to-propylene reaction

Regulating Surface Acid-Base Balance on NaZSM-5 by Fe Modification Towards Enhanced Methanol Dehydration to Dimethyl Ether

An Insight into Effect of Methanol on Catalytic Behavior of Amberlyst 35 Resins for Alkylation Desulfurization of Fluid Catalytic Cracking Gasoline

Influence of framework Al distribution in HZSM-5 channels on catalytic performance in the methanol to propylene reaction

The Alkylation of Benzene With Ethanol Over Zeolite HZSM-5

Alkylation of Benzene by Methanol: Thermodynamics Analysis for Designing and Designing for Enhancing the Selectivity of Toluene and Para -Xylene

Effect of ZSM-5 Acid Modification on Aromatization Performance of Methanol

Aluminum Fluoride Modified HZSM-5 Zeolite with Superior Performance in Synthesis of Dimethyl Ether from Methanol

Selective Alkylation of Benzene with Methanol to Toluene and Xylene over H-ZSM-5 Zeolites: Impact of Framework Al Spatial Distribution

Utilization of Metal-Functionalized ZSM-5 for Methanol and Low-Carbon Hydrocarbon Coupling Aromatization

Influence of Catalyst Acidity on Dealkylation, Isomerization and Alkylation in Mta Process

Aromatization of Methanol over La/Zn/HZSM-5 Catalysts

Effect of the Si/Al Ratios of Nanocrystalline HZSM-5 Zeolite on the Performance in Catalytic Conversion of Ethanol to Propylene

Effect of Silanation of Hzsm-5 Zeolite on Catalytic Performance of Mo/Hzsm-5 in Methane Dehydro-Aromatization

Modification of acidity in HZSM-5 zeolite for methane-methanol co-reaction

Integration of Nano-Sized HZSM-5 with ZnZrO x as a Bifunctional Catalyst to Boost Benzene Alkylation with Carbon Dioxide and Hydrogen

Effect of Hzsm-5 Zeolite Properties on Dehydro-Aromatization of Methane over Mo/Hzsm-5 Catalyst

Regulating Hierarchical Structure and Acidity of HZSM-5 for Methanol to Aromatics Via Protective Desiliconization and External Surface Modification