Abstract:This article proposes a new finite control set model predictive control (FCS-MPC) strategy that simultaneously evaluates two targeting control objectives including speed and currents in a single cost function, achieving high-performance single-closed-loop control structure. Besides, aiming at the calculation delay problem of the model predictive control controllers, a novel calculation delay compensation method by predicting the current variation within the delay time is proposed. In this article, an improved machine model that is especially designed for the multiobjective FCS-MPC operation is illustrated at first. Then, a new cost function that can evaluate the tracking performance of speed and d-axis current and the steady-state performance of the q-axis current is developed. Compared with the conventional FCS-MPC approaches, extra speed controllers are not needed so that the proposed control topology becomes simpler. Then, in order to tune the weighting factors for the speed and currents in the cost function, an efficient handling strategy containing two implementation procedures, state variable normalization and balance of state sensitivity to voltage alteration, is developed. Finally, a brand-new computation delay estimation and compensation technique based on the dual sampling within a control period is proposed to reduce the current and torque ripples during the control process. Comparative simulation and experiments conducted on a three-phase 1.5-kW permanent magnet synchronous machine drive system are employed to verify the effectiveness of the proposed techniques.

FPGA Implementation of Predictive Cascaded Speed and Current Control of PMSM Drives with Two-Time-Scale Optimization

Predictive Cascaded Speed and Current Control for PMSM Drives with Multi-Timescale Optimization

Deadbeat Current Predictive Control for PMSM Drives Based on a Single FPGA with Digital Implementation Optimization

Two-time Scale Optimized Model Predictive Cascaded Speed and Current Control for PMSM Drives

FPGA-Based Double Vectors Model Predictive Torque Control for PMSM Drives Using Maximized Parallel Implement Architecture

Model Predictive Current Control with Adaptive-Adjusting Timescales for PMSMs

Dynamic control set-model predictive control for field-oriented control of VSI-PMSM

Multiobjective Finite Control Set Model Predictive Control Using Novel Delay Compensation Technique for PMSM

FPGA-Based Extended Control Set Model Predictive Current Control with a Simplified Search Strategy for Permanent Magnet Synchronous Motor

A Novel FCS Model Predictive Speed Control Strategy for IPMSM Drives in Electric Vehicles.

SM Load Torque Observer-Based FCS-MPDSC with Single Prediction Horizon for High Dynamics of Surface-Mounted PMSM

Speed Control for Variable Speed PMSM Drive System Using Nonlinear Variable-Horizon Predictive Functional Control

FPGA-based Real-Time Simulation of Five-Phase PMSM for the HIL Applications

Dual Cost Function Model Predictive Direct Speed Control with Duty Ratio Optimization for PMSM Drives

Fast-Speed Drives for Permanent Magnet Synchronous Motor Based on Model Predictive Control

Continuous Control Set Predictive Speed Control of SPMSM Drives With Short Prediction Horizon

Current Sampling Scheme for Finite-Control-Set Model Predictive Control of PMSM Drives with Two Shunt Resistors

FCS Model Predictive Current Control Method for EV PMSMs at Low Control Frequency Considering Flux Mismatch

FPGA Based Hybrid Sensorless Controller Design for PMSM Drive System

FPGA Implementation of Sensorless Sliding Mode Observer with a Novel Rotation Direction Detection for PMSM Drives

FPGA based Performance Analysis of Speed Control Permanent Magnet Synchronous Motor Drive with Pi and Fuzzy Logic Controller