Abstract:Model predictive control (MPC) is an advanced control method that relies on a mathematical model containing the motor parameters in the field of Permanent Magnet Synchronous Motor (PMSM) application. However, the internal parameters of the motor and external load characteristic parameters are uncertain, and their actual values may be inconsistent with the nominal values, resulting in prediction errors, which in turn affect the performance of the control algorithm. Based on the analysis of the parameter sensitivity of the motor prediction model, traditional finite control set model predictive direct speed controller (FCS-MPDSC) predicts state parameters based on a mathematical model, and there is a problem that the parameters of the motor model are uncertain, which will lead to prediction errors. In order to improve the robustness of FCS-MPDSC parameters, this paper proposes an improved FCS-MPDSC for PMSM application, which abandons the traditional PMSM control cascade structure and has the advantages of fast speed response performance, small speed error and strong parameter robustness. In order to solve the problem of load characteristic parameter uncertainty, Luenberger observer and the Model Reference Adaptive System (MRAS) algorithm are used to estimate the variation of load characteristic parameters in this paper. Moreover, a proportional-integral (PI) control term of speed error is introduced into the cost function to achieve the zero steady state error of speed and torque, which make full use of the robustness of integral action and also a faster dynamic response of direct speed control is maintained. In this paper, the HIL experimental platform is built according to the simulation. The proposed method reduces the steady-state error of the traditional method under the parameter mismatch. When the inductance parameter and the permanent magnet flux parameters deviate two times larger than nominal values, the steady-state error of the motor speed are 0.1125% and 0.8725%, respectively, demonstrating the effectiveness of the proposed method.

Continuous Control Set Predictive Speed Control of SPMSM Drives With Short Prediction Horizon

Dynamic control set-model predictive control for field-oriented control of VSI-PMSM

Continuous Control Set Predictive Speed Control of SPMSM Drives With Stability Improvement

Model Predictive Current Control with Adaptive-Adjusting Timescales for PMSMs

A Combined Model Predictive Current Control for SPMSM Drive with Improved Robustness and Control Precision

Improved Model Predictive Current Control for PMSM Drives Based on Dynamic Reference Current

An Improved Implicit Model Predictive Current Control With Continuous Control Set for PMSM Drives

Prediction Error Analysis of Finite-Control-Set Model Predictive Current Control for IPMSMs

A new model predictive current control strategy for PMSM based on extended control set and dynamic cost function

A finite control set model predictive direct speed controller for PMSM application with improved parameter robustness

Improved Finite-Control-Set Model Predictive Control with Virtual Vectors for PMSHM Drives

Model Predictive Control with Duty Ratio Modulation for Open-Winding PMSM Driveswith Common DC Bus

Neural-Network-Based Predictive Control for PMSM Drives

Lyapunov-Based Fast Finite-State Model Predictive Control for Sensorless Three-Phase Four-Arm MMC

Speed Sensorless Model Predictive Current Control Based on Finite Position Set for PMSHM Drives

Robust adaptive observer-based finite control set model predictive current control for sensorless speed control of surface permanent magnet synchronous motor

Finite-Control-Set Model Predictive Control of Permanent Magnet Synchronous Motor Drive Systems—An Overview

Robust Continuous Model Predictive Speed and Current Control for PMSM With Adaptive Integral Sliding-Mode Approach

Adaptive Ultra-Localized Time-Series for Improved Model-Free Predictive Current Control on PMSM Drives

Constrained Predictive Controllers for High-Performance Sensorless IPMSM Drive Systems With Full-Range Speed Operations

Model Predictive Direct Duty-Cycle Control for PMSM Drive Systems With Variable Control Set