Abstract:Nb-based dual-phase alloys are one of the most promising candidates for hydrogen purification. To solve their brittle fracture in hydrogen-containing atmospheres, the ductile-to-brittle transition-hydrogen concentration (DBTC) is a significant reference index, and the dissolved hydrogen concentration should be controlled below the lower limit of the DBTC, i.e., 0.72 H/M (atomic hydrogen to metal ratio). In this study, hydrogen permeable Nb-Ti-Fe alloys were designed and developed by using the above DBTC concept. Four hyper-eutectic Nb-Ti-Fe alloy membranes were prepared, and their hydrogen solubility was systematically analyzed by corresponding pressure-composition isotherms (PCT curves). The results show that all these samples had a linear relationship between the hydrogen concentration and square root of the hydrogen pressure between 0.1 and 0.4 MPa, which is in accordance with the Sieverts’ law. The hydrogen solubility of the specimens containing the primary TiFe phase was lower than 0.72 H/M, but the alloys with the primary Nb phase had a value that was much higher. The latter was completely broken during the test, even if the feed hydrogen pressure was reduced to 0.15 MPa. Based on the above results and DBTC concept, novel insights into the design of Nb-Ti-Fe hydrogen permeable alloys were elucidated; that is, an improvement in both the hydrogen permeability and hydrogen embrittlement resistance can be attained by controlling the hydrogen solubility. Following this concept, a Nb5Ti58Fe35Cu2 alloy was successfully developed that exhibited a high permeability of 4.32 × 10−8 mol H2 m−1 s−1 Pa−0.5 at 673 K, which is 2.7 times than that of a pure Pd membrane under the same test conditions. The present work demonstrated the feasibility and applicability of the DBTC concept in the design of dual-phase Nb-Ti-Fe hydrogen permeable alloy membranes.

Evaluation of Hydrogen Separation Performance of Ni-BaCe0.85Fe0.15O3-δ Cermet Membranes

Enhanced Stability Of Zr-Doped Ba(Cetb)O3-Delta-Ni Cermet Membrane For Hydrogen Separation

Enhanced stability of Zr-doped Ba(CeTb)O(3-δ)-Ni cermet membrane for hydrogen separation.

High-performance Ni–BaZr0.1Ce0.7Y0.1Yb0.1O3−δ (bzcyyb) Membranes for Hydrogen Separation

Influence of Fabrication Process of Ni–BaCe0.7Zr0.1Y0.2O3−δ Cermet on the Hydrogen Permeation Performance

Phase stability and hydrogen permeation performance of BaCo0·4Fe0·4Zr0·1Y0·1O3-δ ceramic membranes

CO2-tolerant Ni-La5.5WO11.25-δ Dual-Phase Membranes with Enhanced H2 Permeability

Synthesis and hydrogen permeation of Ni–Ba(Zr0.1Ce0.7Y0.2)O3−δ metal–ceramic asymmetric membranes

Preparation and Hydrogen Permeation Properties of BaCe0.95Nd0.05O3−δ Membranes

Preparation and electrochemical properties of Ni–La2-xMgxCe2O7- hydrogen-separation membrane

A high stability Ni–La 0.5 Ce 0.5 O 2−δ asymmetrical metal-ceramic membrane for hydrogen separation and generation

Hydrogen permeability and stability of BaCe0.85Tb0.05Zr0.1O3−δ asymmetric membranes

Preparation and hydrogen permeation of BaCe0.95Nd0.05O3−δ membranes

A mixed electronic and protonic conducting hydrogen separation membrane with asymmetric structure

New Perovskite Membrane with Improved Sintering and Self-Reconstructed Surface for Efficient Hydrogen Permeation

Ce0.8Y0.2O2-δ-BaCe0.8Y0.2O3-δ Dual-Phase Hollow Fiber Membranes for Hydrogen Separation

Co2-Resistant Hydrogen Permeation Membranes Based on Doped Ceria and Nickel

Enhanced CO2-tolerance and hydrogen separation performance of Ba-based ceramic membrane modified by Ce0.9Gd0.1O2-δ surface layer

Investigation on properties of BaZr0.6Hf0.2Y0.2O3-δ with sintering aids (ZnO, NiO, Li2O) and its application for hydrogen permeation

Realizing Stable High Hydrogen Permeation Flux Through BaCo0.4Fe0.4Zr0.1Y0.1O3-δ Membrane Using a Thin Pd Film Protection Strategy

Design of Nb-Ti-Fe hydrogen permeable alloys based on the ductile-to-brittle transition-hydrogen concentration region