Abstract:A fully integrated 27.5-30.5 GHz 8-element phased-array transmit front-end module in 65 nm CMOS is presented. The module is based on the all-RF phased-array architecture and consists of 8 phased-array elements. One 1:8 power splitter divides the input power into 8 elements after the driver stages. Each element consists of one 5-bit digital attenuator, one 5-bit phase shifter, one extra 0/180° switching amplifier, one power amplifier and some buffer stages between the above stages to compensate the gain loss. A 5-bit digital attenuator with amplitude and phase calibration is presented to provide 15.5 dB attenuation coverage with 0.5 dB step. A 180° reflection-type phase shifter, along with an 0/180° switching amplifier is proposed to realize 360° phase shifting coverage with 5.625° step. Amplifiers, including power amplifier, 0/180° switching amplifier and buffer stages, adopt wideband inter-stage matching technique to ensure 27.5-30.5 GHz bandwidth coverage. All of the features are digitally controllable. The measurements show that the module achieves <; -10 dB input return loss, about 36 dB gain across 27.5-30.5 GHz and delivers about 12.71 dBm output-referred 1-dB compression point (OP1dB) power at 29 GHz. The module achieves 2.61° RMS (root mean square) phase error with 1.26 dB RMS gain variation across 27.5-30.5 GHz from the phase shifter and 0/180° switching amplifier. The attenuator achieves 0.26 dB RMS amplitude error with 2.79° RMS phase variation. The chip occupies 6.95 × 3.17 mm <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">2</sup> area and consumes 1.66 A from the 1.2 V power supplies.

A Ku-Band 8-Element Phased-Array Receiver in O.18-μm CMOS Technology

A 4-Element 7.5-9 GHz Phased Array Receiver with 8 Simultaneously Reconfigurable Beams in 65 Nm CMOS Technology

A Four-Element 7.5–9-Ghz Phased-Array Receiver with 1–8 Simultaneously Reconfigurable Beams in 65-Nm CMOS

A C-Band Compact High-Linearity Multibeam Phased-Array Receiver With Merged Gain-Programmable Phase Shifter Technique

A K-Band 4-Element 8-Beam Phased-Array Receiver with Hybrid Vector Interpolation and Impedance-Adapted Multibeam Combining Techniques for Satellite Communications

A Compact Ka-Band Eight-Element Four-Beam Receiver for Low-Earth-Orbit Satellite Communications in 65-Nm CMOS

A $C$ -Band Slat-Type Phased-Array Receiver with Co-Aperture Concurrent Eight Beams

A Ka-Band 64-Element Four-Beam Phased Array Receiver with Inter-Beam Interference Cancellation

A K-Band Eight-Element Dual-Beam Receiver with Current-Sharing-Based Low-Power Technique for LEO SATCOM in 65-Nm CMOS

An 800-Ps Origami True-Time-Delay-Based CMOS Receiver Front End for 6.5–9-Ghz Phased Arrays

Robustness‐oriented P‐band Phased Array Radar Front‐end with High Phase and Gain Resolution in 0.18 BiCMOS

A Ka-band 8-Element 4-Beam Transmitter Front End with Hybrid VGA and Symmetrical Transformer-based Doherty PA

A High-Linearity 7–9-Ghz Receiver Front End with Strength-Oriented Nonlinearity Cancellation

A C-Band Four-Channel Receiver with Current-Sharing and Large-Signal Multigated-Transistor Techniques in 65-Nm CMOS

A K‐band eight‐element reconfigurable phased‐array receiver with high Tx‐band rejection

A Fully Integrated X-Band Phased-Array Transceiver in 0.13-Μm CMOS Technology

A 23–40-GHz Phased-Array Receiver Using 14-Bit Phase-Gain Manager and Wideband Noise-Canceling LNA

Design of a 20-GHz Phased-Array Receiver with high-precision Gain and Phase Control in 65nm CMOS

A 2.77-dB NF K-Band Four-Element Dual-Beam Phased-Array Receiver With 39-dB Tx-Band Rejection for SATCOM Applications

A Packaged 90-to-96GHz 16-Element Phased Array with 18.8/15.8dBm Psat/OP1dB, 14.8% TX PAE in 65nm CMOS Process and +51dBm Array EIRP

A Fully Integrated 27.5-30.5 GHz 8-Element Phased-Array Transmit Front-end Module in 65 nm CMOS