Abstract:This paper aims at studying the partial discharge (PD) characteristics of the LN <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">2</sub> /PPLP insulation system under DC superimposed AC voltage for high temperature superconducting (HTS) cables. The pulse current method was adopted to measure the PD characteristics under the superimposed voltage with different DC components. The voltage virtual value (V <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">rms</sub> ) of AC-DC superimposed voltage is set as 7 kV to analyze the effects of the DC component on the phase distribution of discharges times and amplitude. The experimental results show that: the number of discharges and the discharge amplitude decreases with the increases of DC component. According to the distribution characteristics of the phase spectrum of discharges times, the discharges with different ratio of DC components can be divided into three stages. The partial discharge pulse repetition rate is highest when AC voltage was applied. With the increase of DC components of the superimposed voltage, the total discharge times and the maximum discharge amplitude decrease, together with the widening of the PD phase distribution in stage I and II. When the DC component is up to 6 kV, the discharge times is minimized, and the PD is concentrated in the first quadrant in stage III. As a result, with the increase of the proportion of positive DC in the AC-DC superimposed voltage, the total discharge times and discharge amplitude decrease throughout the process of the PD. As the positive DC proportion increases, the discharge pulse in the positive period gradually exceeds that in the negative one.

Insulation Characteristics Of Pplp In Ghe And Design Of 10 Kv Bipolar Coaxial Hts Dc Cable

Insights on the Breakdown Characteristics of PPLP under Different Test Protocols and Temperatures

Insulation Characteristics of PPLP and Design of 250 kV Class HTS DC Cable

Insulation Characteristics of PPLP for HTS Power Cable at Liquid Nitrogen

Insulation Characteristics Of Dielectric Material For Cd Hts Cable

Study on DC Conductivity Characteristics of Polypropylene Laminated Paper

Lapping dielectric design of 110 kV HTS cable body

Investigation on Dielectric Insulation Properties of ±525 Kv HVDC XLPE Material for High Temperatures Applications

Insulation Design of ±10kv Bipolar Coaxial HTS DC Cable

The Fundamental Characteristics of PPLP as Insulating Material for HTS DC Cable

Thermo-insulation characteristics of PPLP used for superconducting cable

Electrical Insulation Properties of Material Interfaces in HVDC Cable Factory Joint

Analysis of Thermo-electric Coupled Simulation for 10 Kv AC XLPE Cable under Different DC Topologies and Laying Modes

Dielectric Characteristics of Laminated Paper and Polymer Sheets Used for Lapping Dielectric Structure at 77 K

A Study on Insulation Characteristics of Laminated Polypropylene Paper for an HTS Cable

Design and Process of the Insulation System for a 10.5kV,1.5kA HTS Cable

Design of Cold Dielectric Hts Power Cable

Comparative Research on DC Dielectric Properties of Crosslinked Polyethylene and Polypropylene Laminated Paper

Electrical Insulation Design and Experimental Results of a High-Temperature Superconducting Cable

Partial Discharge Characteristics in Liquid Nitrogen /Polypropylene-Laminated-Paper Insulation System under an DC Superimposed AC Voltage for HTS Cable

System Insulation for 10kA High-temperature Superconducting Cable