Abstract:High-temperature superconducting (HTS) power cables operate at low-, medium-, and high-voltage levels for electrical power transmission. Polypropylene-laminated paper (PPLP) is wrapped helically around the HTS layer and it is impregnated with liquid nitrogen (<inline-formula> <tex-math notation="LaTeX">$\text {LN}_{{2}}$ </tex-math></inline-formula>) to form a composite dielectric layer. During the installation and maintenance process of HTS cables, any leak of moisture in the cryostat will lead to immediate ice formation. Once the cable warms up, the ice will melt into water, which will be absorbed by the PPLP Kraft paper layer and is similar to the PPLP paper soaked with water. When the moist PPLP is cooled with <inline-formula> <tex-math notation="LaTeX">$\text {LN}_{{2}}$ </tex-math></inline-formula>, it will form ice and forms a composite material during operation. The objective of this article is to investigate the influence of water content on the breakdown strength, relative permittivity (<inline-formula> <tex-math notation="LaTeX">$\epsilon _{r} $ </tex-math></inline-formula>), and dielectric losses of <inline-formula> <tex-math notation="LaTeX">$\text {LN}_{{2}} $ </tex-math></inline-formula>-impregnated PPLP samples for different numbers of layers. Considering the worst-case scenario of moist samples, wet PPLP samples were tested for breakdown strength and dielectric properties at room temperature (RT) and <inline-formula> <tex-math notation="LaTeX">$\text {LN}_{{2}}$ </tex-math></inline-formula> temperature and were compared with dry PPLP samples. Two different experimental setups were developed to measure the breakdown strength and dielectric properties, respectively, for stacked PPLP layers. The wet and dry samples were tested for the ac <inline-formula> <tex-math notation="LaTeX">${V}$ </tex-math></inline-formula>–<inline-formula> <tex-math notation="LaTeX">${I}$ </tex-math></inline-formula> characteristics, the effect of PPLP stack thickness on dielectric strength, statistical analysis using two-parameter Weibull distribution, and computation of relative permittivity and loss factor from capacitance measurement.

Insulation Characteristics of PPLP for HTS Power Cable at Liquid Nitrogen

Insights on the Breakdown Characteristics of PPLP under Different Test Protocols and Temperatures

Insulation Characteristics Of Dielectric Material For Cd Hts Cable

The Fundamental Characteristics of PPLP as Insulating Material for HTS DC Cable

Study on DC Conductivity Characteristics of Polypropylene Laminated Paper

Insulation Characteristics Of Pplp In Ghe And Design Of 10 Kv Bipolar Coaxial Hts Dc Cable

Insulation Characteristics of PPLP and Design of 250 kV Class HTS DC Cable

Thermo-insulation characteristics of PPLP used for superconducting cable

THE INFLUENCE OF POLYPROPYLENE LAMINATED PAPER ON THE BREAKDOWN STRENGTH OF INSULATION FOR HIGH TEMPERATURE SUPERCONDUCTING CABLE

A Review on Insulation and Dielectrics for High- Temperature Superconducting Cables for Power Distribution: Progress, Challenges, and Prospects

Mechanical Properties of PPLP Material at Cryogenic Temperature

A Study on Insulation Characteristics of Laminated Polypropylene Paper for an HTS Cable

Experimental studies on determination of V-I characteristics and insulation resistance of stacked PPLP layers with liquid nitrogen under AC and DC excitations

Experimental Evaluation of Dielectric Losses of PPLP for Single Phase HTS Cable at Subcooled LN2 Temperatures

Present Research Status of High Temperature Superconducting Cable and Its Cryogenic Insulation

Influence of Water Content on the Dielectric Characteristics of LN2-Impregnated PPLP for HTS Power Cables

Insulation of HTS power cable and properties of the Insulation

Lapping dielectric design of 110 kV HTS cable body

Summary of dielectric material testing for CD HTS cable

Dielectric Characteristics of Laminated Paper and Polymer Sheets Used for Lapping Dielectric Structure at 77 K