Abstract:Abstract In this work, the microstructure, precipitations, crystal orientation and texture of an Inconel 718 superalloy manufactured by selective laser melting (SLM) are investigated by performing post heat treatment. Horizontal and vertical reference faces are examined in the as-built condition, solution conditions for 0.5 and 1 h, and aging condition, respectively. In the as-built condition, Inconel 718 superalloy exhibited cellular and columnar dendrites, a large amount of the fine Laves phase, and several γ ′ phases. During post treatment, the grain size on the horizontal face is changed, which is ranged from 502.23 to 523.55 μ m 2 per grain. Meanwhile, grains coarsened distinctly on the vertical face. The average area of the grain is 739.48 μ m 2 in the as-built condition and increases to 898.19 μ m 2 in the aging condition. Additionally, the amount of MC carbides, γ ′, and γ ′′ strengthening phases increased as well during the post heat treatment process, while that of the Laves phase decreased after solution treatment. The preferred orientation on the horizontal face was 〈111〉//X, 〈001〉//Y in the as-built condition, and 〈101〉//Z in the solution and aging conditions. The preferred orientation on the vertical face was 〈001〉//X, 〈101〉//Y in the as-built condition, 〈101〉//Y in the solution condition, and 〈001〉//X in the aging condition. The orientation distribution function (ODF) analysis showed that the main textures in the as-built and solution conditions were {110}〈110〉 and {110}〈112〉, respectively, which transformed to {001}〈100〉 and {001}〈110〉 during aging. The values of multiples of uniform density (mud) in both horizontal and vertical reference faces the aforementioned preferred orientation and texture increased during post heat treatment. Application of post heat treatment can lead to an ideal microstructure Inconel 718 superalloy manufactured by SLM.

Microstructural Evolution and Corrosion Behaviors of Inconel 718 Alloy Produced by Selective Laser Melting Following Different Heat Treatments

Microstructural evolution and mechanical properties of IN718 alloy fabricated by selective laser melting following different heat treatments

Microstructural evolution and mechanical properties of Inconel 718 alloy manufactured by selective laser melting after solution and double aging treatments

Effect of heat treatment on microstructure and mechanical properties of selective laser melted Inconel 718 alloy

Investigation on the influence of heat treatment on Inconel 718 fabricated by selective laser melting: Microstructure and high temperature tensile property

Heat treatment for selective laser melting of Inconel 718 alloy with simultaneously enhanced tensile strength and fatigue properties

Effect of heat treatment on the microstructure and mechanical properties of Inconel 718 processed by selective laser melting

Effects of post heat treatment on the microstructure evolution of Inconel 718 manufactured by selective laser melting

Effect of Solution and Single-Stage Aging on Microstructural Evolution and Mechanical Properties of Inconel 718 Alloy Manufactured by Selective Laser Melting

Mechanical properties and microstructure evolution of selective laser melting Inconel 718 along building direction and sectional dimension

Effects of Process Parameters and Heat Treatment on Microstructure and Mechanical Characteristics of Laser Powder Bed Fusion Alloy Inconel 718

Microstructure and Electrochemical Corrosion Behavior of Inconel 718 Alloy Fabricated by Selective Laser Melting

The effect of homogenization temperature on the microstructure and high temperature mechanical performance of SLM-fabricated IN718 alloy

Microstructural evolution and mechanical properties of Alloy 718 fabricated by selective laser melting following different post-treatments

Effect of heat treatment on microstructure, precipitation behavior and mechanical properties of Inconel 718 fabricated by laser direct energy deposition

Isothermal Solid‐State Transformations of Inconel 718 Alloy Fabricated by Selective Laser Melting

Microstructural, Mechanical, and Tribological Evolution under Different Heat Treatment Conditions of Inconel 625 Alloy Fabricated by Selective Laser Melting

Mechanical Properties and Microstructure of Inconel 718 Lattice Structures Produced by Selective Laser Melting Process

Knowledge of process-structure-property relationships to engineer better heat treatments for laser powder bed fusion additive manufactured Inconel 718

Effects of a modified heat-treatment on microstructure and mechanical properties of additively manufactured Inconel 718

Effect of heat treatment on microstructures and mechanical properties of Inconel 718 additively manufactured using gradient laser power