Abstract:The shell-and-plate heat exchanger is a completely welded heat exchanger that combines the best features of a shell-and-tube heat exchanger with a plate heat exchanger. The flow between the circular corrugated plates behaves as a first expanding then converging flow, leading to the intricate nature of flow structures, flow resistance, and phase-change heat transfer. The present paper numerically investigates the flow behaviors and heat transfer characteristics in the channel between the circular corrugated plates of 0.2 m in diameter, 0.0022 in corrugation depth, and 75 degrees in corrugation angle. In the simulation, the gas velocity ranges from 0.25-6.00 m/s while the liquid velocity from 0.01-0.20 m/s. The wall is set as adiabatic and constant temperature condition of 350 K, respectively. For the single-phase flow, a longitudinal spiral flow along the main flow direction is formed, and the local velocity at the edge of the circular plate is generally higher and more turbulent than that in the central area. Additionally, the increase of Reynolds number leads to a more significant pressure drop but an apparent heat transfer enhancement. Based on the analysis of the friction factor and Nusselt number with Reynolds number, the empirical correlations for predicting the flow resistance and heat transfer characteristics in the channel are proposed. For the two-phase flow, we employed the VOF model to investigate the distribution of the phases in the downward flows. Compared with the experimental data, the numerical results are demonstrated to provide an accurate analysis of the phases distribution, particularly in the cross section of the channel. Accordingly, the flow patterns in the downward two-phase flows are identified as bubbly flow, slug flow, film flow, and churn flow. Based on the variation of the averaged void fraction, the film flow can be identified as alpha > 0.8 while bubbly flow as alpha < 0.5. Additionally, the void fraction in the cross section of the flow channel along the flow direction is analyzed in detail. Since the effect of the expansion and contraction of structures will go away with an increase in the gas mass flow rate, it can be anticipated that the effect of uniform distribution is more prominent for slug flow and is negligible for film flow.

Numerical Investigation of Heat Transfer and Erosion Characteristics of a New Waffle Primary Surface Heat Exchanger

Numerical simulation of dynamic response for primary surface heat exchanger

Experimental Investigation on the Flow and Heat Transfer of an Air-Air Primary Surface Heat Exchanger

Experimental and numerical study on heat transfer and pressure drop performance of Cross-Wavy primary surface channel

Numerical analysis on heat transfer and flow resistance performances of a heat exchanger with novel perforated wavy fins

Numerical Study on Thermo-Hydraulic Performance in the Shell Side of Spiral-Wound Heat Exchanger

Numerical study flow and heat transfer characteristics of superhydrophobic single tube bundle surface and wake flow

Numerical investigation of heat transfer and fluid flow characteristics inside a wavy channel

Numerical Simulation on the Performance of Air-Air Primary Surface Heat Exchanger

Study on the thermal performance of the cross-flow plate heat exchangers

Numerical study on small-scale longitudinal heat conduction in cross-wavy primary surface heat exchanger

Numerical Study of the Influence of Different Bending Shapes on the Heat Transfer Characteristics of Annular Cross Wavy Primary Surface Recuperator (CW-PSR)

Analysis of Flow and Heat Transfer Performance of Primary Surface Heat Exchanger for Aeroengine

Numerical Study on the Performance of Wavy Fin Heat Exchangers with Different Elliptic Tube Patterns

NUMERICAL STUDY OF FLOW AND HEAT TRANSFER CHARACTERISTICS IN SHELL-AND-PLATE HEAT EXCHANGERS

Numerical investigation and experimental validation of thermo-hydraulic and thermodynamic performances of helical baffle heat exchangers with different baffle configurations

Numerical Identification of Critical Erosion Prone Areas in Tube Heat Exchangers

Thermo-hydraulic Characterization of the Smooth Wavy Fin-and-elliptical Tube Heat Exchangers Using New Type Vortex Generators

Numerical Investigation of Heat Transfer and Erosion Characteristics for H-type Finned Oval Tube with Longitudinal Vortex Generators and Dimples

Numerical Study on Thermal-Hydraulic Performance of a Two-Sided Etched Zigzag-Type High-Temperature Printed Circuit Heat Exchanger

Numerical and experimental analysis of composite fouling in corrugated plate heat exchangers