Abstract:In this study, we propose a new type of small-channel plug-in, the double S turbulators, for passive heat transfer enhancement to improve the flow and heat transfer performance of the fluid in the channel. In the range of Reynolds number 254.51~2545.09, under constant wall temperature heating conditions, the effects of interpolated double S turbulators with different long axial radii (1mm, 1.5mm, 2mm) on the average Nusselt number, pressure drop, total thermal resistance and field synergy number in the rectangular mini-channel were studied. The simulation results show that compared with the smooth rectangular mini-channel, after interpolating double S turbulators with different long axial radii (1mm, 1.5mm, 2mm), the average Nusselt number increased by 81.74%~101.74%, 71.29%~94.06%, 67.16%~88.48%, the total thermal resistance decreased by 45.1%~50.72%, 41.72%~48.74%, 40.28%~47.2%, and the number of field synergies increased by 85.58%~111.65%, 74.1%~102.6%, 69.64%~96.12%. At present, there are few studies on the boundary condition of constant wall temperature, and this paper supplements the research on this aspect. At the same time, the heat transfer performance of the rectangular mini-channel of the interpolated double S turbulators is stronger than that of the ordinary smooth rectangular mini-channel, which not only provides a new idea for the manufacture of micro heat dissipation equipment, but also improves the heat transfer performance of micro heat dissipation equipment and improves its work efficiency. According to the simulation data, the prediction formula of average Nusselt number and pressure drop was established by nonlinear regression method, which can be used to predict the flow and heat transfer characteristics of the rectangular mini-channel of the interpolated double S turbulators.

Experimental and numerical study on heat transfer and pressure drop performance of Cross-Wavy primary surface channel

Study of Heat Transfer of Cryogenic Methane under Supercritical Pressure with Consideration of Thermal Conduction in Engine Cooling Channel Walls

Numerical study flow and heat transfer characteristics of superhydrophobic single tube bundle surface and wake flow

Experimental and Numerical Analysis on Heat Transfer Performance of Slug Flow in Rectangular Microchannel

Thermal and Flow Characterization in Nanochannels with Tunable Surface Wettability: A Comprehensive Molecular Dynamics Study

Numerical investigation on slip-flow and heat transfer characteristics in the entrance region of elliptical microchannels

Experimental and Numerical Investigation of Convection Heat Transfer in Channels with Different Types of Ribs

EXPERIMENTAL AND NUMERICAL INVESTIGATION ON THE HEAT TRANSFER ENHANCEMENT USING LONGITUDINAL VORTICES IN NARROW-CHANNELS

Effects of Novel Turning Vanes on Pressure Loss and Tip-Wall Heat Transfer in an Idealized U-bend Channel

Flow Pattern Study and Pressure Drop Prediction of Two-Phase Boiling Process in Different Surface Wettability Microchannel

A Molecular Dynamics Simulation on the Convective Heat Transfer in Nanochannels

Numerical Study of Flow and Heat Transfer Enhancement by Using Delta Winglets in a Triangular Wavy Fin-and-Tube Heat Exchanger

Forced Heat Convection of Wavy Fin Channel

Heat transfer enhancement mechanism of elliptical cylinder for minichannels with delta winglet longitudinal vortex generators

Experimental Study and Mechanism Analysis of the Flow Boiling and Heat Transfer Characteristics in Microchannels with Different Surface Wettability

Numerical analysis on heat transfer and flow resistance performances of a heat exchanger with novel perforated wavy fins

Effect of Surface Coupling Characteristics on the Flow and Heat Transfer of Nanochannel Based on the Orthogonal Test

Thermo-hydraulic performance improvement, heat transfer, and pressure loss in a channel with sinusoidal-wavy surface

Experimental and numerical characterization of single-phase pressure drop and heat transfer enhancement in helical corrugated tubes

Multi-effect Evaluation of Cooling Heat Transfer Performance for Supercritical CO2 Flowing in Micro-Channel

Numerical study on flow and heat transfer characteristics of rectangular mini-channel of interpolated double S turbulators