Abstract:Due to extensive applications of microfluidic devices, manufacturing of these apparatus has recently been noticed. Production of multiple emulsions is one of the main goals of manufacturing microfluidic devices. Design and fabrication of microfluidics are functions of the size of emulsion droplets, properties of fluids applied for emulsification, and considered stability for emulsions. In this article, we have manufactured a novel microfluidic device using simple fabrication and accessible materials. Capillary tubes, PTFE (polytetrafluoroethylene) chassis, a medical needle of gauge 32, and O-rings are the primary materials used to produce this device. The production procedure is explained completely, and all the drawings are represented. Concerning probable interactions between glues and flowing fluids, we tried to fabricate and seal the device without applying chemical agents. The device is tested by n-heptane and deionized water to produce multiple water-in-oil-in-water (W/O/W) emulsions. A sensitivity analysis on the rate of injection is performed. Considering the HLB (hydrophilic-lipophilic balance) as an important property of emulsifiers, the effects of two different types of emulsifiers (sodium dodecyl sulfate with HLB of 40 and glycerol monostearate with HLB of 3.8) at various concentrations are investigated. Due to the results, the injection rate of the mediate phase should be less than half of the outer phase for the formation of emulsions. Consequently, the rate of injection for the inner phase should be less than half of that for the mediate phase. The simplicity of production and accessible raw materials could be considered as the strengths of our microfluidic device.

Gelatin-based Microfluidics Device with the Feature Sizes Smaller Than 100 Μm for Production of Oil-in-water Emulsions

Microfluidic production of aqueous suspensions of gellan-based microcapsules containing hydrophobic compounds

Gravity-Oriented Microfluidic Device for Biocompatible End-to-End Fabrication of Cell-Laden Microgels.

A novel fabrication of microfluidic device for generation of multiple emulsions

Microfluidic Fabrication of Water-in-water Droplets Encapsulated in Hydrogel Microfibers

Non-swelling hydrogel-based microfluidic chips.

Preparation of Monodispersed Nanofibrous Gelatin Microspheres Using Homebuilt Microfluidics

Facile Microfluidic Fabrication of Biocompatible Hydrogel Microspheres in a Novel Microfluidic Device

Manipulating The Generation Of Uniform O/W And W/O Emulsions Using Microfluidic T-Junction

Micro/nanofabrication of Brittle Hydrogels Using 3D Printed Soft Ultrafine Fiber Molds for Damage-Free Demolding.

Synthesis of scalable microdroplets with fluid instability of shearing flow in microfluidics

A versatile and robust microfluidic device for capillary-sized simple or multiple emulsions production

Manipulating T-Junction Chip for the Generation of Uniform O/W and W/O Emulsions

Rational Design of Liquid-Liquid Microdispersion Droplet Microreactors for the Controllable Synthesis of Highly Uniform and Monodispersed Dextran Microspheres

Controllable Microfluidic Production Of Gas-In-Oil-In-Water Emulsions For Hollow Microspheres With Thin Polymer Shells

Fabrication of Microscale Hydrogels with Tailored Microstructures based on Liquid Bridge Phenomenon

A novel microfluidic technology for the preparation of gas-in-oil-in-water emulsions.

One-step microfluidic approach for controllable production of gas-in-water-in-oil (G/W/O) double emulsions and hollow hydrogel microspheres

High-Throughput Microfluidic Production of Droplets and Hydrogel Microspheres through Monolithically Integrated Microchannel Plates

High-Throughput Production of Micrometer Sized Double Emulsions and Microgel Capsules in Parallelized 3D Printed Microfluidic Devices

Reconfigurable All‐Oil Microfluidic Devices by 3D Printing (Small 40/2024)