Abstract:In order to get a better hygrothermal stress and failure prediction for CFRP laminate, an RVE model was established. Wet and thermal stress were coupled using a sequential method. Macroscopic and microscopic subroutines were developed to calculate the stress–strain field of CFRP laminate and RVE model. A multiscale numerical simulation of three‐point bending of moisture‐saturated CFRP laminate was conducted. A mesoscopic representative volume element (RVE) model of carbon fiber reinforced polymers (CFRP) laminate with 15 plies was established based on the principle of fiber random disturbance. The RVE model was validated by comparing the elastic parameters calculated by the RVE model, Chamis model, and Bridge model. Wet stress and thermal stress were coupled using a sequential method. Macroscopic and microscopic subroutines were developed to calculate the stress–strain field of CFRP laminate and RVE model. A multiscale numerical simulation of three‐point bending of moisture‐saturated CFRP laminate was conducted. Failure process and failure modes of CFRP laminate were discussed based on the multiscale simulation and SEM observations. The results show that the RVE model and the multiscale simulation strategy presented in this work can predict the coupled hygrothermal stress and the strength degradation due to moisture absorption very well. The maximum error between the simulated and experimental averaged force of the moisture‐saturated CFRP laminate subjected to three‐point bending is about 3.4%. Multiscale simulation demonstrated that uneven distribution of fibers can result in the fiber/matrix interfaces bearing a larger transverse stress in the fiber's dense distribution area. It is the main reason that results in fiber/matrix interface failure of CFRP laminates working in hygrothermal environments. Highlights A RVE model of CFRP laminate was presented using fibers random disturbance. Coupled hygrothermal stress of single fiber and surrounded matrix was obtained. A multiscale simulation of the strength change of the CFRP plate due to wet‐thermal stress was conducted. Failure modes of CFRP laminate are discussed based on the multiscale simulation.

Analysis of Open-Hole Compressive CFRP Laminates at Various Temperatures Based on a Multiscale Strategy

Micro Failure Analysis of Fiber Metal Laminates

Concurrent Multiscale Modeling of In-Plane Micro-Damage Evaluation in Z-pinned Composite Laminates

A Combined Experimental and Computational Analysis of Failure Mechanisms in Open-Hole Cross-ply Laminates under Flexural Loading

Out-of-plane Tensile Failure Behavior of Fiber Reinforced Composites Due to Lay-Up Temperature Induced Intra-Ply and Inter-Ply Voids

Multiscale simulation of hygrothermal stress and mechanical properties degradation of carbon fiber reinforced polymers laminates

Failure Analysis of Composite Laminate under Low-Velocity Impact Based on Micromechanics of Failure

Revealing low temperature-mechanical coupling failure mechanisms in CFRP laminates with in-situ observations

Progressive failure of laminated composites with a hole under compressive loading based on micro-mechanics

Analysis of Tensile Failure Behavior of Metal Fiber Laminates Under Different Temperature Environments

A comparative study on failure mechanisms of open-hole and filled-hole composite laminates: Experiment and numerical simulation

Investigation of flexure response and damage behavior of CFRP/aluminum hybrid laminates among various temperatures

Multi-scale concurrent analysis for bio-inspired helicoidal CFRP laminates and experimental investigation

The damage of low-velocity impacted cfrp laminates with different stacking sequences based on micro-mechanics of failure

Static Compressive Strength Prediction of Open-Hole Structure Based on Non-Linear Shear Behavior and Micro-Mechanics

Damage Evolution and Multi-Scale Analysis of Carbon Fiber-Reinforced Cross-Ply Laminate with Thermal Residual Stress

Multiscale Progressive Failure Analysis for Composite Stringers Subjected to Compressive Load

Prediction of Long-term Fatigue Strength of Quasi-isotropic CFRP Laminates with a Hole under Compressive Loading

Multiscale numerical investigation on failure behaviour of three-dimensional orthogonal woven carbon/carbon composites subjected to pin-loading

A Comparative Study on the Mechanical Properties of Open-Hole Carbon Fiber-Reinforced Thermoplastic and Thermosetting Composite Materials

Computational Micromechanics-Based Prediction of the Failure of Unidirectional Composite Lamina Subjected to Transverse and In-Plane Shear Stress States