Abstract:Thermal, mechanical and tribological properties of carbon fabric/resin laminated composites containing carbon fiber powder with different densities. Carbon fabric/resin laminated composites (CFRC) are extensively used in aerospace, transportation, and other fields owing to their superiorities of lightweight, high strength, and convenient integral molding. Therefore, strong interlaminar binding and prominent wear resistance are urgent requirements for avoiding premature failure of laminated materials in harsh working environments. To elevate the superficial wear resistance and interlaminar bonding strength of composites simultaneously, the modified composites were obtained by introducing carbon fiber powder (CFP) with different densities on the surface of the composites and between layers. The experimental results indicate that CFP can be evenly distributed in the interlaminar resin enrichment zone of the sample (CFRC‐40) when the deposition density is 40 g/m2. Consequently, CFRC‐40 presents optimal thermal conductivity owing to better heat transfer bridges between layers of the composite established by CFP. At the same time, the mechanical properties such as the tensile, impact, and interlaminar shear strengths of CFRC‐40 are improved by 42.8%, 10.2%, and 8.5%, respectively, compared with the original CFRC, which are attributed to the absorption of crack propagation energy and the inhibition of crack propagation by CFP. Furthermore, the dynamic friction coefficient maintains at a high level after introducing CFP with a density of 40 g/m2, while the wear rate significantly decreases by 61.2% from 12.99 × 10−14 m3(N m)−1 to 5.04 × 10−14 m3(N m)−1. This study proposes an innovative strategy to improve the interlaminar bonding of carbon fabric/resin laminated composite, which is conducive to obtaining composite with excellent mechanical and tribological properties. Highlights A facile and effectual method was adopted to introduce carbon fiber powder (CFP) into the interlamination and surface of the composites simultaneously. The mechanical properties and abrasive resistance of the composites were obviously strengthened by regulating the content and distribution of CFP. CFP at a certain scale, could not only hinder the propagation of cracks but also alleviate the surface wear and extend the service life of composites.

Growth of Carbon Black Onto Continuous Carbon Fiber to Produce Composites with Improved Mechanical and Interfacial Properties: A Step Closer to Industrial Production

Improved Mechanical Properties of Carbon Fiber-Reinforced Epoxy Composites by Growing Carbon Black on Carbon Fiber Surface

Influence of Carbon Nanotube Coatings on Carbon Fiber by Ultrasonically Assisted Electrophoretic Deposition on Its Composite Interfacial Property.

Improved Interfacial Properties of Carbon Fiber/epoxy Composites Through Graphene Oxide-Assisted Deposition of Carbon Nanotubes on Carbon Fiber Surface

Multiscale interfacial enhancement of surface grown carbon nanotubes carbon fiber composites

Interfacial Improvement of Carbon Fiber/epoxy Composites Using a Simple Process for Depositing Commercially Functionalized Carbon Nanotubes on the Fibers

Interfacial Properties Improvement of Carbon Fiber Reinforced Epoxy Composites Modified with Carbon Nanotubes

Preparation of CNTs/SCF reinforcement using multiple continuous surface treatments to achieve synergistic improvement of epoxy resin-based composites interfacial properties: Towards industrial production of carbon fiber surface treatment

Interfacial Enhancement by CNTs Grafting towards High-Performance Mechanical Properties of Carbon Fiber-Reinforced Epoxy Composites

Improving mechanical and tribological properties of carbon fabric/resin laminated composites by carbon fiber powder

Construction of 3D nanostructures on carbon fiber surfaces by sizing for preparing high‐performance composites

Optimization of Electrical Intensity for Electrochemical Anodic Oxidation to Modify the Surface of Carbon Fibers and Preparation of Carbon Nanotubes/Carbon Fiber Multi-Scale Reinforcements

Surface Modification of Carbon Fiber by Electro-Polymerization: Continuous Production, Thickness Control, Colorization, and Preparation of CFRP

Interfacial modification of carbon fiber by carbon nanotube gas-phase dispersion

High Efficient and Continuous Surface Modification of Carbon Fibers with Improved Tensile Strength and Interfacial Adhesion

Unravelling the Influence of Surface Modification on the Ultimate Performance of Carbon Fiber/Epoxy Composites

One‐step in‐situ growth of CNTs on oxidized carbon fiber: Effects of catalyst concentration and growth time on mechanical properties of carbon fiber

Influence of Carbon Nanotubes Coatings Onto Carbon Fiber by Oxidative Treatments Combined with Electrophoretic Deposition on Interfacial Properties of Carbon Fiber Composite

A Novel Surface Modification of Carbon Fiber for High-Performance Thermoplastic Polyurethane Composites

Effects of CNT Microstructural Characteristics on the Interfacial Enhancement Mechanism of Carbon Fiber Reinforced Epoxy Composites Via Molecular Dynamics Simulations

Enhanced interfacial properties of carbon fiber/epoxy composites by coating carbon nanotubes onto carbon fiber surface by one-step dipping method