Abstract:Ni-rich layered oxides, such as LiNi0.8Co0.1Mn0.1O2 (NCM811), are promising cathode materials for high-energy lithium-ion batteries. However, the relatively high reactivity of Ni in NCM811 cathodes results in severe capacity fading originating from the undesired side reactions that occur at the cathode-electrolyte interface during prolonged cycling. Therefore, the trade-off between high capacity and long cycle life can obstruct the commercialization process of Ni-rich cathodes in modern lithium-ion batteries (LIBs). In addition, high sensitivity toward air upon storage greatly limits the commercial application. Herein, a facile surface modification strategy is introduced to enhance the cycling and in-air storage stability of NCM811. The NCM811 with a uniform SrTiO3 (STO) nano-coating layer exhibited outstanding electrochemical performances that could deliver a high discharge capacity of 173.5 mAh⋅g-1 after 200 cycles under 1C with a capacity retention of 90%. In contrast, the uncoated NCM811 only provided 65% capacity retention of 130.8 mAh⋅g-1 under the same conditions. Structural evolution analysis suggested that the STO coating acted as a buffer layer to suppress the dissolution of transition metal ions caused by the HF attack from the electrolyte and promote the lithium diffusion during the charge-discharge process. In addition, the constructed STO layer prevented the exposure of NCM811 to H2O and CO2 and thus effectively improved the in-air storage stability. This work offers an effective way to enhance the performance stability of Ni-rich oxides for high-performance cathodes of lithium-ion batteries.

Enhancing the Electrochemical and Storage Performance of Ni-based Cathode Materials by Introducing Spinel Pillaring Layer for Lithium Ion Batteries

Surface Modification and Electrochemical Properties of Li-Rich Layered Cathode Materials for Lithium-Ion Batteries

Radially Oriented Single‐Crystal Primary Nanosheets Enable Ultrahigh Rate and Cycling Properties of LiNi0.8Co0.1Mn0.1O2 Cathode Material for Lithium‐Ion Batteries

Suppressing the Structure Deterioration of Ni-Rich LiNi0.8Co0.1Mn0.1O2 Through Atom-Scale Interfacial Integration of Self-Forming Hierarchical Spinel Layer with Ni Gradient Concentration

Surface spinel reconstruction to suppress detrimental phase transition for stable LiNi0.8Co0.1Mn0.1O2 cathodes

Enhanced Cyclability of LiNi0.6Co0.2Mn0.2O2 Cathodes by Integrating a Spinel Interphase in the Grain Boundary.

Enhancing the Storage Performance and Thermal Stability of Ni-Rich Layered Cathodes by Introducing Li2MnO3

Inverse Spinel-Structured Mg2MnO4 Coating to Enable Superior Thermal Stability of LiNi0.83Co0.12Mn0.05O2 Cathodes for Lithium-Ion Batteries

Bulk and surface reconstructed Li-rich Mn-based cathode material for lithium ion batteries with eliminating irreversible capacity loss

Performance Improvement of Li-rich Layer-Structured Li1.2Mn0.54Ni0.13Co0.13O2 by Integration with Spinel LiNi0.5Mn1.5O4

Enhancing cyclic and in-air stability of Ni-Rich cathodes through perovskite oxide surface coating

Reinforcing Li-rich layer cathode via artificial surface reconstruction of spinel shell containing Ni3+

Integrated co-modification of PO43− polyanion doping and Li2TiO3 coating for Ni-rich layered LiNi0.6Co0.2Mn0.2O2 cathode material of Lithium-Ion batteries

Mixed-conducting Interlayer Boosting the Electrochemical Performance of Ni-rich Layered Oxide Cathode Materials for Lithium Ion Batteries

Improving the cycling and air-storage stability of LiNi<sub>0.8</sub>Co<sub>0.1</sub>Mn<sub>0.1</sub>O<sub>2</sub> through integrated surface/interface/doping engineering

Enhanced Electrochemical Performance of Layered Lithium-Rich Cathode Materials by Constructing Spinel-Structure Skin and Ferric Oxide Islands.

Functional Passivation Interface of LiNi 0.8 Co 0.1 Mn 0.1 O 2 toward Superior Lithium Storage

Improved Electrochemical Performance of Li-Rich Cathode Materials via Spinel Li2MoO4 Coating

Enhanced cycling performance of Li ion batteries based on Ni-rich cathode materials with LaPO4/Li3PO4 co-modification

Enhanced interfacial reaction interface stability of Ni-rich cathode materials by fabricating dual-modified layer coating for lithium-ion batteries

Profiting the Co-Modifications of Li 2 SnO 3 Coating and Sn 4+ Doping in Co-Free Ni-Rich Cathode Particles for Lithium-Ion Batteries